Jump to content
SAU Community

Recommended Posts

I have absolutely no personal knowledge or insight - but googling around it looks like it could be a lubricant additive in your oil - http://www.bobistheo...e-oil-analysis/

Titanium

Titanium is a newer, more environmentally friendly anti-wear additive being implemented due to more stringent emissions regulations, and is phasing out the older, more harmful phosphorous compounds such as ZDDP (Zinc dialkyldithiophosphate). ZDDP reduces the effectiveness of the catalysts in catalytic converters by creating a plating effect when combusted, and covering the catalyst while Titanium does not. Titanium chemically binds to wear surfaces creating a hard, Titanium based oxide layer which reduces friction, thereby reducing wear. Concentration levels vary greatly depending on oil brand.

Looking a bit further, I found http://www.exxonmobi...UsedOilEval.pdf which talks about oil analysis, and mentions some negative reasons for titanium in oil tests:

Upward movement of Iron and Titanium and Chrome may indicate a spinning bearing outer race if the engine case is Titanium.

Don't think this is relevant for RB2X engines.

The last reference I found at http://www.lube-tips.com/focus/2006_08_30.htm

The presence of titanium in used oil analysis is generally a result of contamination from paint. This is often expected from new or rebuilt components such as gearboxes. Titanium can also result from wear of high alloy bearings, or high-quality steel in gears.

Anyway, hope I've found something useful.

Recently brought a 32 GTR, Fully rebuilt around 20,000k's ago. What oil would you recommend? Daily driver. Last service i put 10-50 motul in it.

Mobil 1 oil, always used it in mine from day one, never noisey, never changes colour, and no oil consumption, its impressed me, even with 300kw and ethanol its like honey on the dip stick... its 0w/40w

I thought having oil staying clean meant it wasn't cleaning the carbon/shit out of your engine?

i think thats more to do with your oil being contaminated by your blow by gases, so if your engines loose you'll have black oil sooner, mine would go dark after a number of dyno runs, but not with normal use...

im sure ill be corrected, now with ethanol it never gets dirty so must prove my point, but its still a clean oil whatever grade it is and has worked well for me.. my opinion only

i think thats more to do with your oil being contaminated by your blow by gases, so if your engines loose you'll have black oil sooner, mine would go dark after a number of dyno runs, but not with normal use...

im sure ill be corrected, now with ethanol it never gets dirty so must prove my point, but its still a clean oil whatever grade it is and has worked well for me.. my opinion only

Wat?

Mine is jet black after 500ks, sounds like there is no detergent in the oil.

[

Soot and carbon buildup are a byproduct of the combustion process, if the oil is still honey colored after 5000km then there is 2 possibilities I can think of. The engine is extremely clean by engine health (good compression etc) and the tune itself (not overly rich etc) or the engine oil by design has minimal detergents for cleaning

Soot and carbon buildup are a byproduct of the combustion process, if the oil is still honey colored after 5000km then there is 2 possibilities I can think of. The engine is extremely clean by engine health (good compression etc) and the tune itself (not overly rich etc) or the engine oil by design has minimal detergents for cleaning

As said before, every engine and setup must contribute heavily then... The engine has close to 200k on it, comp test 175average, zero oil consumption and definitely a rich tune, people driving behind must be getting tipsy lol, hope theres no RBT around as i drive by, they'd all be taken into custody..:)

I would of thought the soot was from the 98 having being made from oil products, ethanol is an alcohol so how can you get soot? it should literally clean the soot out the tail pipe?

  • 3 weeks later...

lol at the tipsy comment.

I've found it doesnt matter what i put thru my car, it used to always come out almost as clean as it went in after 5000km. but with time and some more Km's (almost 80k ive put on it now, total of 145k) it is getting a little dirtier every time. but still by no means black or even a solid color.

My angry old bug would turn the oil black within 2 mins of running after a change :P

I've now gone to the Penrite Ten Tenths, racing 10, 10-40 (stupid name). ive never used penrite before, whats everyone's thoughts? (ive done this due to availability in my local area.....im getting sick of chasing round the countryside look for the same oil everytime)

I've now gone to the Penrite Ten Tenths, racing 10, 10-40 (stupid name). ive never used penrite before, whats everyone's thoughts? (ive done this due to availability in my local area.....im getting sick of chasing round the countryside look for the same oil everytime)

reported to be very good and for a non 300+rwkw skyline that's not seeing the track is a great choice

Recently brought a 32 GTR, Fully rebuilt around 20,000k's ago. What oil would you recommend? Daily driver. Last service i put 10-50 motul in it.

whatever the engine builder reccomends

i think thats more to do with your oil being contaminated by your blow by gases, so if your engines loose you'll have black oil sooner, mine would go dark after a number of dyno runs, but not with normal use...

im sure ill be corrected, now with ethanol it never gets dirty so must prove my point, but its still a clean oil whatever grade it is and has worked well for me.. my opinion only

Your oil getting black is from the detergants 'cleaning' your engine, you certainly wouldn't want to be getting black oil just from blow by.

If you change oil only every 5,000km's it should be slightly black, by 10,000km's if it aint black I would be worried, either the engine is impossible clean or the oil aint cleaning sh*t.

I chnged my oil today and noticed that i used the whole 5l bottle but i couldn't see the oil covering the cams is that meant to be so i read a post where someone said they only use 3.4l.

It's a NEO engine .

Edited by B-rice

Your oil getting black is from the detergants 'cleaning' your engine, you certainly wouldn't want to be getting black oil just from blow by.

If you change oil only every 5,000km's it should be slightly black, by 10,000km's if it aint black I would be worried, either the engine is impossible clean or the oil aint cleaning sh*t.

Blowby is one of the reasons oil needs to contain detergents to 'clean' the engine.

http://www.bobistheoilguy.com/forums/ubbthreads.php?ubb=showflat&Number=258648

If ring seal was perfect and combustion was complete, oil would last far longer.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • After using a protractor for an actually accurate assessment of what is required,  and by NOT using my uncalibrated eyeball I worked out I need a 25° silicone bend from the TB ro the MAF, but, my choice was either a 30° or a 23° (23° is a weird spec), so I grabbed the 23° one from Raceworks I also grabbed 1mtr of 3" straight from Just Jap, I needed 350mm, but they only had 300mm, or 1mtr lengths....meh Also ordered a 1/2" hose bulkhead fitting from fleabay, this has a smoothish mushroom looking head (they are designed for below the water line of boats) that will fit inside the bend, the hose bit and threaded bit looks to long, but nothing that a hacksaw cannot fix if required, the hose will then just get jamed on the threaded bit up to the retaining nut Fingers crossed and the unsightly amount of hose clamps will be reduced down to 4 once all the parts arrive 
    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
    • No. I think it might be the AFM. Hence the use of the terms "swaptronics", which implies the use of swapping out electronics for the purpose of diagnosis. It's about the only way to prove that a small/niggling/whatever problem with an AFM or a CAS or similar is actually caused by that AFM/CAS/whatever. A known good item swapped in that still gives the same problem is likely to be caused somewhere else. They're all the same. Spraying AFMs with cleaner is an each way bet between cleaning it and f**king it.
    • Oh wow! This might actually work amazingly. Do you know the ratio of the diff? I was told the only thing you need to make sure of is if the front & rear diff ratios are the same. Ours is a 4.083 Thanks!
×
×
  • Create New...