Jump to content
SAU Community

Recommended Posts

Hey Mark, this is still my old R32 yeah? how's it going? and don't call it a track bitch! it hurts my feelings!!!

we should do a track day together soon.

oh, and yeah external pump is a good idea. ask duncan about it, he runs one in his Combined Touring spec car and he would know if it's ok/not ok for targa I'm sure.

Hey Mark, this is still my old R32 yeah? how's it going? and don't call it a track bitch! it hurts my feelings!!!

Richard I think you might have the wrong Mark. Pretty sure this is the one my mate imported and we punted around in Targa 2008. That engine has survived 1 full Targa Tas already!

Mark I wouldn't be surprised if that motor has been rebuilt already at some stage. Could be a few surprises inside,, it had r32 nismo turbos on it.

How are you measuring the oil pressure? Not with the stock guage I hope - they are notorious for faulty sensors.

Heya BEER, I might drop DUNCAN a PM and see his thoughts. Thanks mate :) As for track day,. lemme sort this oil pressure issue, then it's game on!

Heya PAUL, this is Steves car. I'm interested to why you think the engine has been built already? Steve never mentioned anything to do with internals?!

I was using the std oil pressure gauge. It didn't drop to zero, but it has dropped to 1bar before I shut it off right away. Then once restarted, back up to normal again?!

Got that motor for me still?? hahahaa

Mark :)

Heya PAUL, this is Steves car. I'm interested to why you think the engine has been built already? Steve never mentioned anything to do with internals?!

I was using the std oil pressure gauge. It didn't drop to zero, but it has dropped to 1bar before I shut it off right away. Then once restarted, back up to normal again?!

Got that motor for me still?? hahahaa

Story goes Steve imported it, complied and registered it. Then we started pulling it apart about 6 weeks out from Targa.

We changed the turbo's over to newer ball bearing -7's, so had a chance to have a good look in there. It just looked like it had been apart before. It has Nismo (550cc I think) injectors, the lag master Nismo turbos were on it. But it was at stock boost and stock computer.

It just kinda looked like it had been heavily modified before, then set back to stock and sold... just a hunch. But would not surprise me if the motor had been rebuilt back in Japan at some point.

Anyhow! NEVER NEVER trust the stock oil pressure guage!! They are not even accurate when they are working. Get an oil sandwich plate on, and say a Defi oil pressure guage which comes with a sensor.

Re: my engine - I am putting the 32 back together after all as my freedom from rules track bitch :)

Heya PAUL,

Interesting. Maybe I'll hold off buying any parts till it's stripped down ;)

I looked for my spare oil pressure gauge the other night and couldn't find it. I will be checking the factory gauge before blowing $10k on a build!!

Thanks for the heads up on the possible mods. Goodluck with ya 32 ;) Feels good having a car to thrash the fark out of and not bother breaking, unlike my previous rig!!

Chat soon Paul,

Mark :)

Heya BEER, I might drop DUNCAN a PM and see his thoughts. Thanks mate :) As for track day,. lemme sort this oil pressure issue, then it's game on!

Heya PAUL, this is Steves car. I'm interested to why you think the engine has been built already? Steve never mentioned anything to do with internals?!

I was using the std oil pressure gauge. It didn't drop to zero, but it has dropped to 1bar before I shut it off right away. Then once restarted, back up to normal again?!

Got that motor for me still?? hahahaa

Mark :)

yeah I agree with paul, 1 bar on the stock gauge can mean nothing at all other than the stock gauge is not working 100%. even on my 32 with gauge working as well as it ever has it's far lower than the defi gauge. at idle the stock gauge is around 1.5 and the defi shows 2.5bar steady. before you panic definitely get a proper aftermarket pressure gauge on it.

Richard I think you might have the wrong Mark. Pretty sure this is the one my mate imported and we punted around in Targa 2008. That engine has survived 1 full Targa Tas already!

Mark I wouldn't be surprised if that motor has been rebuilt already at some stage. Could be a few surprises inside,, it had r32 nismo turbos on it.

How are you measuring the oil pressure? Not with the stock guage I hope - they are notorious for faulty sensors.

ahh, I thought this was my old white R32 GTR I sold to a bloke from the blue mountains in about 2008 too! lol, I thought his name was Mark too. small world.

yeah I agree with paul, 1 bar on the stock gauge can mean nothing at all other than the stock gauge is not working 100%. even on my 32 with gauge working as well as it ever has it's far lower than the defi gauge. at idle the stock gauge is around 1.5 and the defi shows 2.5bar steady. before you panic definitely get a proper aftermarket pressure gauge on it.

Yeah mine was always all over the place... would go high, drop to zero, just above zero, halfway, high again. Seemed to drop to zero as you would pull up to the lights a lot. Crapped my dacks a few times at first but then just got used to ignoring it. Why Nissan would do that to their customers is beyond me!

In other news... I have entered the dirty old 34 into THC this week. CAMS log book is en-route.

If you were going to rebuild the engine, you should just get a N1 crate engine 13k i think. Drop it in and you're off. Dad's crate engine has done 3 Targas, and some open circuit racing, and it's still going strong. The power has ranged from 330rwkw to 400rwkw over the years.

I think you'll be fighting a uphill battle to run an external pump. As the GT-R has been proven realiable fast car now for years with a sump and good pump.

The standard gauge in my R32 GT-R does the same as yours, it's as good as usless. gauge shows no pressure, turn it off and on, and you magicly have 4 bar again.

I'm thinking about Lake Mountain Serge. I figure it would be a great testing opportunity as we can run over the same bit of road to get some good data and have the time to make some set-up changes between runs.

Will really depend on how hard it is to find this little niggle and if we can get the few little parts on the car in time or not. If not I might do the Tour regardless.

I did email my nav about it last week but haven't had a reply from him though which is a worry! :)

I see Tarmac mag reported that you used a legal 5 speed this year to finish second... lol

Well in fairness I never did use 6th at any stage! LOL (I could have on Cethana / Mt Rowland but my testies said no).

So in a sense I did use the legal version of the 5 speed rather than the illegal version. :)

I read a lot if fiction in Tarmac mag.... I struggle to find a reason to buy it these days, most of the detail is 5 months old already.

So Dean Evans isn't the best driver in the whole world?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Stock ECU (or more accurately stock tune) absolutely refuses to go over 10psi and behaves like you have seen. The Nistune is the same if it is the stock tune. If the Nistune chip has been tuned, the resulting tune could be literally anything for any combination of parts. The Nistune just makes the stock ECU Tunable.
    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
    • OK, next the shroud needs to come off and there are a couple of tricks. Firstly, there is a loom from near the passenger side headlight to the fans, coolant temp sensor etc and there is no plug to undo.  In my case I was OK to leave the shroud on top of the engine so I just undid the passenger side fan plug and about 10 of the clips which gave enough free wire to put it aside. The fan plugs were super tight, the trick I used was a small falt screwdriver to push down on the release tab, then a larger flat screwdriver to lever the plug out of the fan unit....be careful with how much force you apply! If you need to remove the shroud altogether for some reason you will have to deal with all the plugs (tight) and clips (brittle)....good luck. I removed all of the clips and replaced them with cable ties that I will just cut next time. Also, in the Red Sport / 400R at least, the intake heat exchanger reservoir hose is bolted to the shroud in 2 places with 10mm headed bolts; so remove them (the hose stays in the car; no need to undo it at the t fittings down at the radiator lower mount. Once you've dealt with the HX hose and the wiring loom, there are 3x 10mm headed self tappers holding the top of the shroud to the radiator; remove those.   The shroud then lifts out of the bottom mounts where it sits on the radiator, up and onto the engine out of the way. Simples
×
×
  • Create New...