Jump to content
SAU Community

Recommended Posts

cheers mate

no doubt i'll give you a wave if I see your ride around as I haven't seen any lakeshore blue v35's either. i don't tend to see many v35 sedan's come to think of it.

i probably won't be lowering it anymore as it's already scraping over speedbumps...i wince in pain every time i drive over any surface that isn't level.

  • 2 weeks later...

hey guys.. finally upgraded from the 34.. although i miss all the power !.. mines a dec 05 premiem spec.. already removed are the factory alarm sensors on dash , toll card reader , and a few silly things...

Mods done - X force cat back 2 1/3" mendral bent exhaust same as 350z except it needs 25cm added to extend it

full nismo kit from japland

20 x10 with 275 rear and 20x 8.5 235 front koya visso, viper pager alarm

Next to come once chris rodgers has converted my bose dash unit a full 7k stereo and some springs to level the car out..

See you fello skyline owners around

post-13170-1230513805_thumb.jpg

post-13170-1230513821_thumb.jpg

post-13170-1230513837_thumb.jpg

Edited by 53XYN
  • 2 weeks later...
hey guys.. finally upgraded from the 34.. although i miss all the power !.. mines a dec 05 premiem spec.. already removed are the factory alarm sensors on dash , toll card reader , and a few silly things...

Mods done - X force cat back 2 1/3" mendral bent exhaust same as 350z except it needs 25cm added to extend it

full nismo kit from japland

20 x10 with 275 rear and 20x 8.5 235 front koya visso, viper pager alarm

Next to come once chris rodgers has converted my bose dash unit a full 7k stereo and some springs to level the car out..

See you fello skyline owners around

very nice ride you have here, very beautiful, and beautifully kept.

Your project, should you choose.......let's get that rear number plate nice and straight......??? :P

ps...I just came from an R33.....sure I miss the launch/noise of that thing....but not the 'power' as such...V35 has so much more low-down torque that it made my R33 feel a bit 'small'......I can leave my V35 in 3rd gear most of the time! (and I live in the hills)...R33 was always wanting gears...(still loved it though)

Got dish?

Geeesh!...they are horn looking cars.

I like your dish....(got dosh?)...

They're not overboard, which many seem to be going towards,..I like them very muchly.

Our cars look the same, except mine hasn't got that front wheel mud guard thang....(and got std 18" rims, which I love too muchly to swap over).

Hi all: I'm not new to the site: have been floating around in the Stagea section for quite a while now...

I bought a pair of manual V35s close to 7 months ago: one sensible car, and one silly car. They are now, finally, complied!

As I am yet to take pics of the sensible one (haven't had a chance to clean it yet!)here is the silly car: it is the Chargespeed workshop car for Tokyo Auto Salon '07. It won a trophy in the 'sporty car' category for its body kit. The car is factory standard mechanically, with the exception of the 19" wheels and Advance coilovers, so it's a complete show pony as-is. I intend to keep this one (i think), and add the HKS supercharger kit, for a bit m ore poke. Also, the carbon fibre seats are a new lesson in torture (made for narrow japanese rear ends), but I have a pair of Recaros lying around that I was going top put in the Stagea, so I am considering fitting these after a retrim.

Alternatively, I could put the SC kit on the other car, which is immaculate, and only has 10800km on the clock.... I'm torn! The wife says I have to sell at least one of them, but I don't know which way to go.

Anyway, here's some pics of the kitted car finally in Australia and complied:

post-39451-1232072876_thumb.jpgpost-39451-1232072956_thumb.jpg

post-39451-1232072984_thumb.jpgpost-39451-1232073001_thumb.jpg

As soon as I have it on the road, and cleaned, I'll post some of the other (sensible) car as well...

  • 3 weeks later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...