Jump to content
SAU Community

Recommended Posts

I was having severe issues on the Manildra blend at anything under 15 degrees, now on Caltex it will start fairly easily, only a little cough and splutter but on the first crank or two. The issue is I cant give it a bit of pedal at startup with the stupid electronic throttle.

A.C.T dude...

Constant below zero mornings here in winter grrr

E70 would probably be needed then :)

I got back from Canada about a month ago, they all use electric oil warmers in winter on Petrol motors and Diesels pretty much don't start when it's really cold haha

Temperature ranged from -10 to -38deg :blink:

Edited by SimonR32

E70 would probably be needed then :)

I got back from Canada about a month ago, they all use electric oil warmers in winter on Petrol motors and Diesels pretty much don't start when it's really cold haha

Temperature ranged from -10 to -38deg :blink:

LOL. Interesting, our hire car in Utah didn't have problems starting when it was -12 one morning....

The Springvale pump does the same thing, just hang it up and start again. It seems to do it when they don't enable the pump quick enough.

I always use the pump closest to the shop/office. The other pump is screwed. I've tried hanging it up and starting but its still slow as hell...

Has anyone done any tests on smaller amounts of e85 mixed with PULP?

Say 10 litres of e85 with the rest pulp? I now a few guys have done E30 blends but have required retunes.

I was wondering if adding a smaller amount say the last 10 litres worth in a full tank be worth it or a waste of time. Could you get away with this small amount without having to have a retune done?

Cool. Might have to look into getting a retune.

I have highflowed 600cc injectors. If i were to get a retune to run straight E85 would these injector be maxed?

SR20det

600cc injectors

NIstune

Full zorst

2871r

Walbro Pump

Making 210rwkw on 16psi

Cool. Might have to look into getting a retune.

I have highflowed 600cc injectors. If i were to get a retune to run straight E85 would these injector be maxed?

SR20det

600cc injectors

NIstune

Full zorst

2871r

Walbro Pump

Making 210rwkw on 16psi

Find out from your tuner what duty cycle your injectors are running at, that will tell you. Or get a diagnostic cable and install nistune and find out for yourself.

I think you will be fine running straight E85 on 600cc injectors!! Joeyjoey was running 300rwkw on E85 with 550cc injectors. That seems to be one of outliers but still I cant see why 600cc injectors couldnt run 240-250rwkw on E85??

Find out from your tuner what duty cycle your injectors are running at, that will tell you. Or get a diagnostic cable and install nistune and find out for yourself.

I think you will be fine running straight E85 on 600cc injectors!! Joeyjoey was running 300rwkw on E85 with 550cc injectors. That seems to be one of outliers but still I cant see why 600cc injectors couldnt run 240-250rwkw on E85??

SR20 4 banger not a 6cyl RB.

jono/harey/trozzle. you guys are cracked. no way can you make that much with only 4, 600cc injectors. my 4 nismo 555cc injectors in my silvia are pretty much maxed at 240kw on PULP. you can get 250kw on 4X600cc on pulp but to do an E85 tune you're going to need 850s at a min. I'd go even bigger if you want to pull some decent power too.

jono/harey/trozzle. you guys are cracked. no way can you make that much with only 4, 600cc injectors. my 4 nismo 555cc injectors in my silvia are pretty much maxed at 240kw on PULP. you can get 250kw on 4X600cc on pulp but to do an E85 tune you're going to need 850s at a min. I'd go even bigger if you want to pull some decent power too.

Completely didn't think about the fact it's a 4 cyl :P

jono/harey/trozzle. you guys are cracked. no way can you make that much with only 4, 600cc injectors

yer i highly doubt they'd be big enough for straight e85

im not on as much crack as the other 2.....

There's definitely an E85 shortage in Adelaide.

United have stopped selling it, Caltex is the only one selling it at the moment.

Hopefully the ethanol supply picks itself up after the floods in QLD

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • KW only offers a set for the R32 GTR. Popular options are D2 racing, Ksport or Öhlins. I have a D2 Racing coilover set, though I don't know for sure which one.
    • Well, the good news is you have more than one very good option for new coilovers in and around your country. Worth the drive over to KW to talk about GTR stuff.
    • Fair enough, I am in no way a tire expert so I'm not familiar with all the terms and conditions. I'll definitely note down the AD09 to potentially try in the future. Rain is not too big of a concern for now as I will probably only drive in the rain when I have to. And considering I still lack experience driving the GTR I'd more than likely take it easy too. I have coilovers in the car but as I barely got to drive so far I never bothered to even check if they are adjustable haha. The suspension is almost entirely old and worn as well so I suppose when I eventually fix that in the future that would make a huge difference.
    • There's not a great deal to report here .... except ...... FOR .... LSD!!!  I bought a Quaife LSD from the UK and shipped it here .... Wish I'd just bought locally cause the shipping and duty was $700! But there were so many diffs used in the E90s I just wanted to be absolutely certain I was getting the right one so I spoke with a supplier in the UK who builds race cars and they have heaps of experience with the E90s.  I pulled the diff out which was seriously awesome - I've never done anything like that before, I must have watched 1000 videos on YT about it as well as consulting the Bentley manual. It was super easy in the end. The diff was delivered to the awesome folks at Hornsby Diffs and will be back in a few weeks. I also replaced the diff bushings with some Nolathane ones.  Really looking forward to getting it back and getting back to the track or even the skidpan.
    • yeah... the 13kg/mm springs weren't always in there, I had 10kg/mm but doing a few SMSP commanded heavier front springs. It's so good now going into T1 and T2, just need more seat time and real tyres.
×
×
  • Create New...