Jump to content
SAU Community

Recommended Posts

does anyone have any std GTR injectors that i could borrow?

my car got defected and i'm running 1000cc injectors and E85, am just wondering whether i'd need to change the injectors out and get it through on a PULP std tune or whether i'd be able to leave the bigger ones in and leave the car on E85?

all the fuel lines are stock or at least look std. its all done with propper tubing.

does anyone have any std GTR injectors that i could borrow?

my car got defected and i'm running 1000cc injectors and E85, am just wondering whether i'd need to change the injectors out and get it through on a PULP std tune or whether i'd be able to leave the bigger ones in and leave the car on E85?

all the fuel lines are stock or at least look std. its all done with propper tubing.

Depends do the injectors look stock or do you have a custom fuel rail that makes it obvious?

wont it affect emissions or something

They dont check idle emissions, if they suspect something they will request you get an application to modify vehicle and specify it as a condition on there.

You will be fine, if your injection system looks stock, stock ECU then you will be fine.

what are peoples thoughts on going through regency with R33 LCAs on a 32, FMIC with a hole cut under battery tray, z32, gt3076, nistuned rb20 ecu on a rb25.... ?

gonna ring regency monday aswell...

Z32 AN GT3076 will get picked on that's about all sorry to hear you got defected

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Bit of a pity we don't have good images of the back/front of the PCB ~ that said, I found a YT vid of a teardown to replace dicky clock switches, and got enough of a glimpse to realize this PCB is the front-end to a connected to what I'll call PCBA, and as such this is all digital on this PCB..ergo, battery voltage probably doesn't make an appearance here ; that is, I'd expect them to do something on PCBA wrt power conditioning for the adjustment/display/switch PCB.... ....given what's transpired..ie; some permutation of 12vdc on a 5vdc with or without correct polarity...would explain why the zener said "no" and exploded. The transistor Q5 (M33) is likely to be a digital switching transistor...that is, package has builtin bias resistors to ensure it saturates as soon as base threshold voltage is reached (minimal rise/fall time)....and wrt the question 'what else could've fried?' ....well, I know there's an MCU on this board (display, I/O at a guess), and you hope they isolated it from this scenario...I got my crayons out, it looks a bit like this...   ...not a lot to see, or rather, everything you'd like to see disappears down a via to the other side...base drive for the transistor comes from somewhere else, what this transistor is switching is somewhere else...but the zener circuit is exclusive to all this ~ it's providing a set voltage (current limited by the 1K3 resistor R19)...and disappears somewhere else down the via I marked V out ; if the errant voltage 'jumped' the diode in the millisecond before it exploded, whatever that V out via feeds may have seen a spike... ....I'll just imagine that Q5 was switched off at the time, thus no damage should've been done....but whatever that zener feeds has to be checked... HTH
    • I think Fitmit had some, have a look on there (theyre Australian as well)
    • Hah, fair enough! But if you learn with this one you can drive any other OEM manual. No modern luxury features like auto rev-matching or hillstart assist to give you a false sense of confidence. And a heavy car with not that much torque so it stalls easily. 
    • Actually, I'd say all three are the automatic option. Just the different trim levels. The manual would be RSFS, no? 
×
×
  • Create New...