Jump to content
SAU Community

Recommended Posts

Cheers guys, yeah I'm thinking nicer gauges down the line, only really wanna keep boost and oil temp. For the record when I am driving I can see all of my speedometer and revs but I'm sure a cop wouldn't believe that haha.

How do I get rid of the turbo timer appropriately? I have no knowledge of them, and also a fire risk you say?

A gauge is a gauge, what is a "nicer" one going to do? waste of money

Fire hazard as if you crash your car and get a fuel leak, you turn the ignition off and get out the car, engine keeps running pumping fuel into the mess, if you have a fire it will just keep fuelling it and nothing you can do. You need to get the wiring diagram and figure out what it is wired into, or pay someone to remove it for you.

Only really need boost gauge for tuning, otherwise the stock one is good enough to see when you are on full boost or not.

Edited by Rolls

I disagree that they are a fire risk - unless they are incorrectly wired in, turbo timers need to have the park brake fully engaged in order for them to activate - otherwise the car just turns off.

So in the case of an accident, unless you put your park brake on before turning the car off then it won't activate at all.

This guys magna burnt to the ground because of a turbo timer, remember reading about it years ago, engine kept running after the fire started and just pumped huge amounts of fuel into the fire.

http://www.aussiemagna.com/forums/archive/index.php/t-37918.html

http://webcache.googleusercontent.com/search?q=cache:ULZws-7uEDUJ:www.aussiemagna.com/forums/archive/index.php/t-37918.html+&cd=7&hl=en&ct=clnk&gl=au

Edited by Rolls

I have never seen a turbo timer wired to a park brake before, and it wouldn't help much in the event of an accident now would it. As above I would get it removed professionally. There is no need for a turbo timer on a water cooled turbo.

  • Like 1

Well yeah just for the record guys, my Turbo Timer IS wired to only work with my Park Brake on but yeah it does seem unnecessary. However i'll leave it till i've got some more cash floating around to get it done properly

all 3 of my cars Timers were wired to the park brake. Current car, I have removed the timer myself, already had connectors on the wires so I only had to cut the earth as it was spliced into another wire. So easy to put back in should I choose to.

Just google the wiring diagram, its pretty simple to remove yourself if you want to.

I have never seen a turbo timer wired to a park brake before, and it wouldn't help much in the event of an accident now would it. As above I would get it removed professionally. There is no need for a turbo timer on a water cooled turbo.

+1

-D

  • 3 months later...

Just curious on how many people are rolling around with a highmount set up and have gotten away with it? Haha

Any decent cop will defect you for it and you'll never pass regency without a full engineers cert with emissions test. You can make 350rwkw on a gts-t and > 400kw on a gtr with highflowed OEM replacements, technically not legal but unless they drop your intake piping and measure the compressor they will never get you for it. Afaik they never go to the above effort anyway. Unless you like doing turbo swaps for fun on the weekend imo this is the only way to modify a street car if you drive it daily and want to avoid defects.

Edited by Rolls

Any decent cop will defect you for it and you'll never pass regency without a full engineers cert with emissions test. You can make 350rwkw on a gts-t and > 400kw on a gtr with highflowed OEM replacements, technically not legal but unless they drop your intake piping and measure the compressor they will never get you for it. Afaik they never go to the above effort anyway. Unless you like doing turbo swaps for fun on the weekend imo this is the only way to modify a street car if you drive it daily and want to avoid defects.

+1

If I had my time again, I would have gotten a high flow for my RB30 rather than the GT3076R...

  • 2 weeks later...

Any decent cop will defect you for it and you'll never pass regency without a full engineers cert with emissions test. You can make 350rwkw on a gts-t and > 400kw on a gtr with highflowed OEM replacements, technically not legal but unless they drop your intake piping and measure the compressor they will never get you for it. Afaik they never go to the above effort anyway. Unless you like doing turbo swaps for fun on the weekend imo this is the only way to modify a street car if you drive it daily and want to avoid defects.

I've been lucky enough to be pulled over almost each time the cars been taken out and they look, but never said anything about it - luckily. However as mentioned the car is now engineered so the ring doesn't pucker up each time see the men in blue

I've been lucky enough to be pulled over almost each time the cars been taken out and they look, but never said anything about it - luckily. However as mentioned the car is now engineered so the ring doesn't pucker up each time see the men in blue

Sounds pretty good, who does the engineering certification in SA?

^^^ don't feel safe with an engineering certificate - if police suspect somethig is illegal they will STILL defect you - their response is: defect first, then let Regency sort it out. I know of plenty of cases where police told people that their engineering cert is not worth shit. And of course this makes sense - you could have changed anything at all since the engineering cert to make the car illegal.

^^^ don't feel safe with an engineering certificate - if police suspect somethig is illegal they will STILL defect you - their response is: defect first, then let Regency sort it out. I know of plenty of cases where police told people that their engineering cert is not worth shit. And of course this makes sense - you could have changed anything at all since the engineering cert to make the car illegal.

It will mean something to regency though, eg you can have modifications that you other wise couldn't so you don't have to go part swapping.

Cop can defect a brand new car if they want, nothing will stop that.

^^^ don't feel safe with an engineering certificate - if police suspect somethig is illegal they will STILL defect you - their response is: defect first, then let Regency sort it out. I know of plenty of cases where police told people that their engineering cert is not worth shit. And of course this makes sense - you could have changed anything at all since the engineering cert to make the car illegal.

True Andrew - thankfully been lucky enough to date with the high-mount etc. as is even when been pulled over police have been fine (obviously not doing anything stupid at the time).

Good thing about the whole car being engineered is that done correctly it is lodged to the transport department along with everything on the car and it's in the database. Bonus being the engineering personnel doing it is well known by Sapol.

As always, depends who pulls you over.....

  • Like 1
  • 2 weeks later...

Hey guys does anyone know if I can change the engine number from a defected vehicle to another chassis and it'll go through? In other words I have a defected skyline but I brought another one that's not defected and decided to put the motor from the defected into the new one, can I still change the engine number on the new one?

You need to put in an application to change engine number, if it is the same engine they will do it in 5 minutes, if it is a different or larger capacity one they may send you back a list of conditions that you must meet and have a full inspection to prove that you have done the items.

Defected should not make any difference.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Has equal chance of cleaning an AFM and f**king an AFM. I think you can work out what happened. When the Hitachi ECU sees the AFM die and goes into the associated limp mode, then it will start and run just fine, because it ignores the AFM and just runs on idle maps that will do what it needs to get it going. But there is no proper load signal, so that's about all it can do. My suggestion? If you don't want to go full aftermaket ECU, then get some R35 GTR AFM cards and some housings to put them in, in the stock location, and Nistune the ECU. Better to do a good upgrade than just replace shitty 40 year old tech with the same 40 year old tech.
    • So my car was recently having trouble starting on initial crank, I would need to feather the gas for it to start up but besides that it would start and run fine. So I clicked the idle air control valve (with throttle body cleaner) and cleaned the MAF sensors (with MAF cleaner). The start up issue was fixed and now the car turns over without the assist of the throttle, but the car is in limp mode and wont rev past 2.5k RPM. From what I understand the IACV would not put the car in limp mode, so I am to believe it is the MAF sensors, but it was running fine before and now I cant get it out of limp mode. I cleaned the MAF made sure the o rings were seated properly. Made sure the cables were plugged in properly, the cables also both read the same voltage. Does anybody know why this is or what could be causing this or how to get it out of limp mode?
    • Ooo I might actually come and bring the kids, however will leave the shit box home and take the daily
    • Thanks. Yeah I realised that there's no way I'd be able to cover the holes with the filler, it would just fall through. Thanks again @GTSBoy!
    • That was the reason I asked. If you were going to be fully bodge spec, then that type of filler is the extreme bodge way to fill a large gap. But seeing as you're going to use glass sheet, I would only use that fibre reinforced filler if there are places that need a "bit more" after you've finished laying in the sheet. Which, ideally, you wouldn't. You might use a blob of it underneath the sheet, if you need to provide some support from under to keep the level of your sheet repair up as high as it needs to be, to minimise the amount of filler you need on top. Even though you're going bodge spec here, using glass instead of metal, the same rules apply wrt not having half inch deep filler on the top of the repair. Thick filler always ends up shitting the bed earlier than thin filler.
×
×
  • Create New...