Jump to content
SAU Community

Recommended Posts

The shoebox is up and running! This was designed to be a portable/LAN gaming rig on a budget (<$1900k incl. all peripherals).

Specs:

CPU: i5 3570 (3.4ghz-3.8ghz)

MB: ASUS P8H77-I

RAM: Ripjaws 8gb (4gb x 2, 1600mhz)

GPU: Gigabyte GTX770 Windforce OC 4gb (1137mhz base, 1189mhz boost)

HDD: Samsung EVO 840 SSD 120gb, Seagate Barracuda 1TB x 2

PSU: Corsair HX650v2

Case: Cooler Master Elite 120 MITX

Monitor: ASUS PB278Q (27" 2560 x 1440 PLS)

Keyboard: Logitech G510S

Mouse: Razer DeathAdder 2013

I was curious to see how Gigabyte's bells and whistles 770 would go up against the mighty 780ti that Leigh had installed previously, in essentially the same system. Given nearly $400 difference between the two cards, I'm pretty happy with being ~2000 points shy at 9739, versus his original 3dmark11 of 11899. This is unclocked, so maybe we can pick up some of the slack with some card tampering...assuming Gigabyte left us enough headroom. Everything stayed very cool during the benchmark - surprisingly cool and quiet, in fact, for an MITX case - but it probably helps having 3 huge fans on your GPU. Two of these cards in SLI would be killer for the money (my exact intention when games get too much for the single card).

The 3dmark result isn't anything spectacular by gaming PC standards, but neither is the $$$$ spent, and this unit is a piece of piss to lug around (see pic below; it's literally just a heavy shoebox). The real test will come when I run up BF4 on 1440 - if she can do that with playable FPS, then I think we've built a little winner. Props to Leigh for helping out with the build.

xlFncQx__original.jpg

The shoebox is up and running! This was designed to be a portable/LAN gaming rig on a budget (<$1900k incl. all peripherals).

Specs:

CPU: i5 3570 (3.4ghz-3.8ghz)

MB: ASUS P8H77-I

RAM: Ripjaws 8gb (4gb x 2, 1600mhz)

GPU: Gigabyte GTX770 Windforce OC 4gb (1137mhz base, 1189mhz boost)

HDD: Samsung EVO 840 SSD 120gb, Seagate Barracuda 1TB x 2

PSU: Corsair HX650v2

Case: Cooler Master Elite 120 MITX

Monitor: ASUS PB278Q (27" 2560 x 1440 PLS)

Keyboard: Logitech G510S

Mouse: Razer DeathAdder 2013

I was curious to see how Gigabyte's bells and whistles 770 would go up against the mighty 780ti that Leigh had installed previously, in essentially the same system. Given nearly $400 difference between the two cards, I'm pretty happy with being ~2000 points shy at 9739, versus his original 3dmark11 of 11899. This is unclocked, so maybe we can pick up some of the slack with some card tampering...assuming Gigabyte left us enough headroom. Everything stayed very cool during the benchmark - surprisingly cool and quiet, in fact, for an MITX case - but it probably helps having 3 huge fans on your GPU. Two of these cards in SLI would be killer for the money (my exact intention when games get too much for the single card).

The 3dmark result isn't anything spectacular by gaming PC standards, but neither is the $$$$ spent, and this unit is a piece of piss to lug around (see pic below; it's literally just a heavy shoebox). The real test will come when I run up BF4 on 1440 - if she can do that with playable FPS, then I think we've built a little winner. Props to Leigh for helping out with the build.

Good to see it up and running! the 780ti is 'only' $320 more not $400 :P but yeah high end cards always have and always will pull a bit of a premium in the old price vs performance battle it just depends on how far you want to go down that path. The 280x is great bang for buck or GTX760 but yeah wouldn't quite give you the performance on our high res monitors that you'd want :) You gotta look at the graphics score in 3dmark, obviously being the same CPU going to be the same physics score (CPU based, 3dmark overall score does rely a fair bit on the CPU & clock) 11500 on graphics score definitely a great result for a standard out of the box card - run it for a few weeks to make sure it's not defective and chuck a couple more clocks in it hehe.

Very compact, beasty LAN / gaming rig and nice peripherals - now get dat dere cat5 cable ran, enough of the wireless! :P

Edit: Keyboard looks good without the wrist riser thing.. might take mine off and sus it out. And I'm mad jelly of dat dere samsung evo.

Download the logitech software and get the back light to match your mouse :)

Edited by UNR33L

Get an external for your media ;)

Comparing results in 3D mark, there are a few guys on there who have obtained 780 (and close to unclocked ti) performance, clocking their Gigabyte 770s to 1250mhz. Will give it a go in a couple weeks and see where it ends up.

Mini ATX and their motherboards have come a long way, especially the latter, where features of larger boards are making their way onto a much smaller form factor. There's no reason you can't put a 780ti/Titan and an i7 in my case, with 16gb DDR and a 750w PSU, should your budget permit. I've got room for 3 hard drives and a DVD drive, which for most is plenty and there's always external media storage options.

Get an external for your media ;)

Comparing results in 3D mark, there are a few guys on there who have obtained 780 (and close to unclocked ti) performance, clocking their Gigabyte 770s to 1250mhz. Will give it a go in a couple weeks and see where it ends up.

Mini ATX and their motherboards have come a long way, especially the latter, where features of larger boards are making their way onto a much smaller form factor. There's no reason you can't put a 780ti/Titan and an i7 in my case, with 16gb DDR and a 750w PSU, should your budget permit. I've got room for 3 hard drives and a DVD drive, which for most is plenty and there's always external media storage options.

The guys clocking their base clock upto 1250mhz are probably increasing voltage and running on water dont forget, careful you don't want to fry your card :P (I don't know much about the 770s though so might be alright dunno, it does run a different chipset than the 780s/ti/titan thought - the GK104)

And yea I had 3 hard drive and my SSD velcro-ed underneath the bay worked mad.

How are you liking the SSD? :D

Edited by UNR33L

Think you're forgetting I have 3 windforce fans :P

Haha nah fair warning. I won't be going nuts on it, but a little boost shouldn't hurt. 1250mhz is also only 50 more than Gigabyte have boost clock set to.

The shoebox is up and running! This was designed to be a portable/LAN gaming rig on a budget (<$1900k incl. all peripherals).

Specs:

CPU: i5 3570 (3.4ghz-3.8ghz)

MB: ASUS P8H77-I

RAM: Ripjaws 8gb (4gb x 2, 1600mhz)

GPU: Gigabyte GTX770 Windforce OC 4gb (1137mhz base, 1189mhz boost)

HDD: Samsung EVO 840 SSD 120gb, Seagate Barracuda 1TB x 2

PSU: Corsair HX650v2

Case: Cooler Master Elite 120 MITX

Monitor: ASUS PB278Q (27" 2560 x 1440 PLS)

Keyboard: Logitech G510S

Mouse: Razer DeathAdder 2013

I was curious to see how Gigabyte's bells and whistles 770 would go up against the mighty 780ti that Leigh had installed previously, in essentially the same system. Given nearly $400 difference between the two cards, I'm pretty happy with being ~2000 points shy at 9739, versus his original 3dmark11 of 11899. This is unclocked, so maybe we can pick up some of the slack with some card tampering...assuming Gigabyte left us enough headroom. Everything stayed very cool during the benchmark - surprisingly cool and quiet, in fact, for an MITX case - but it probably helps having 3 huge fans on your GPU. Two of these cards in SLI would be killer for the money (my exact intention when games get too much for the single card).

The 3dmark result isn't anything spectacular by gaming PC standards, but neither is the $$$$ spent, and this unit is a piece of piss to lug around (see pic below; it's literally just a heavy shoebox). The real test will come when I run up BF4 on 1440 - if she can do that with playable FPS, then I think we've built a little winner. Props to Leigh for helping out with the build.

xlFncQx__original.jpg

the big factor with these is heat due to lack of space in and around the case. what options are you going for cooling if you decide to O/C?

Can't OC the CPU or RAM unless tampering with BCLK and then I'd see maybe 4ghz in the top end, but that's not really worth it. There's no need for games anyway. I'd only be touching the card clock, which I've done a bit of gaming with and it's never even felt warm. These cooler master cases aren't the prettiest, but they do have a fair bit of space inside, particularly around the GPU and CPU. Only area that gets crowded inside is the hard drive bays and power supply with the SATA cables. Being a modular PSU it's still pretty good. I should take a pic with the case cover off to show.

There's actually a fan to the side of the mobo that is unplugged at the moment, because it's quite big/loud, so if temps get up I can switch that back on and should help.

im not to sure how good overclocking with the bclk is.. i never tried at lower clock speeds but at a 48x multi even 1mhz more then stock makes it unstable :(

dont forget about the volume wheel on the keyboard haha.. my fave feature.. u should get aida64, cool app fr putting clocks,temps, volts .anything on the screen

I use precision X's monitoring for my GPU only, I kinda want one that will monitor both GPU and CPU well.. I'm sure there's one out there but I'm too lazy to bother, I do enjoy watching dat dere boost ~1200mhz though on my 780ti

downloaded 3D mark demo via steam and ran it, but gfx card was just idling, not heating up, not boosting GPU clock or memory clock ??

Updated your gfx card drivers? and update 3dmark to latest version too

Edited by UNR33L

The 3dmark result isn't anything spectacular by gaming PC standards, but neither is the $$$$ spent, and this unit is a piece of piss to lug around (see pic below; it's literally just a heavy shoebox). The real test will come when I run up BF4 on 1440 - if she can do that with playable FPS, then I think we've built a little winner. Props to Leigh for helping out with the build.

So I conducted this test lastnight, and the results were very surprising. With ultra 2560x1440, without using software to track an average, I hovered ~45-60fps and nothing dipped below 35-40fps in the heavier action (granted, I wasn't on big servers with huge maps). This is surprising, because most BF4 tests I'd seen of the GTX770 show a 40fps average on these settings, dipping down into high 20s at times, which is borderline unplayable. Granted, that is probably based in a stock reference card, so maybe my Gigabyte's overclocking and the extra 2gb vram (4gb) are a huge help with the higher resolution. Either way, it's comforting to know the game is very playable at this resolution and quality of graphics! Bumped it down to high settings at 2560 x 1440 and without anti-aliasing; saw ~65-75fps average. Very satisfied with the build now!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Sorry, just assumed that talk of coloured pads meant EBC red/green/yellow/shit stuff. I don't know the DBA pads, but it's a reasonable bet that they will be OK. DBA make good stuff generally. Those 4000 series rotors I linked to are very good. I may well replace the RDA rotors I have with those when required.
    • The average previous owner for these cars were basically S-chassis owners in the US. Teenagers or teenager-adjacent. I often tell people that neglect is easier to fix than something that was actively "repaired" by previous owners.
    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
×
×
  • Create New...