Jump to content
SAU Community

Recommended Posts

Thought I would throw up a few pics of my completed SR20 build - no dyno yet (finished at midnight last night).

Interesting bits:

Full-Race Twin Scroll mani with twin gates

3071 with .78 divided ex housing

Hypertune Intake

1000 cc Sards

Autronic

Forged and Darton Sleeved Bottom End

JHH Engineering Head with larger Super Tech inconel ex valves

Tomie 260/260 12mm lift pro cams

SR20Build007.jpg

SR20Build010.jpg

SR20Build011.jpg

SR20Build012.jpg

Pic of the gates before the dump tube went on - these actually merge back into the main exhaust.

SR20Build003.jpg

Edited by juggernaut1
Link to comment
https://www.sau.com.au/forums/topic/249832-my-sr20-build-pics-inside/
Share on other sites

  • Replies 81
  • Created
  • Last Reply

Top Posters In This Topic

Damn sweet looking setup. Cant wait to see a power figure. As much as im enjoying my 26 i miss my SR's...

Why the twin gates?

The manifold and turbo exhaust housing is divided (i.e. twin scroll). On a SR20 this means cylinder exhaust manifold runners 1 and 4 are paired off and completely and separately to 3 and 4 right up to the exhaust wheel.

Because they are paired off each pair of cylinder runners has its on gate. Whilst it is possible to use a twin gate tubes merge into a single gate - there is a cetain amount of exhaust gas pressure leakage from one gate tube to another in the exhaust manifold as it is not possible to create a perfect seal between the two gate tubes at the merge point just before entry into the single gate.

Edited by juggernaut1

with a setup that well designed for boost control, I would have thought you would have optioned for at least a GT3076 (6 blade version) ?? Not knocking it, but that turbo will produce sub 300rwkw outputs, but a good mid range.

Just think thats a bit of an overkill for hte powerlevel you are going to achieve.

Well done none the less, don't take my comments as slander, just more curiosity.

Jono

Edited by The Mafia
with a setup that well designed for boost control, I would have thought you would have optioned for at least a GT3076 (6 blade version) ?? Not knocking it, but that turbo will produce sub 300rwkw outputs, but a good mid range.

Just think thats a bit of an overkill for hte powerlevel you are going to achieve.

Well done none the less, don't take my comments as slander, just more curiosity.

Jono

No offense taken. I actually did consider the 3076 but Geoff Raicer from Full-Race convinced me otherwise and advised me this setup will acheive quicker lap times on a short circuit like Barbagello in Perth where I live. I seemed to get the impression from him that the slight loss in transient response wasn't worth the extra hp gain the 3076 would give.

In any case, I wasn't chasing any certain power level more a case of the best transient response and area under the curve.

Edited by juggernaut1

awesome setup, good components with a well thought out plan ad application. So often i get cars dropped off that are based on the hp rating of the turbo and not the application.

We did a S15 earlier this year to achieve similar things (you probably know athid) decent plenum, decent turbo setup, cooler ecu etc and well it produced the craziest curve and torque i have ever seen outta a SR20, i cant wait to see your dyno grpah as im sure they will be very close.

here is athids;

post-34927-1229936807_thumb.jpg

Edited by URAS
Yes Trent it will be interesting to see how it compares to the single scroll stuff. Can't wait to get it on a dyno, tune and run it in.

i reckon your a winner for sure, beau's setup on the beams engine sure aint a slouch :P

  • 2 months later...

Quick update

Had the car on the dyno yesterday.......ambient temp was 43 degrees and high humidity here in Perth so it was working hard......anyway at 17 psi the Hypertune intake manifold split open.

Couldn't see it (or hear it) at first but couldn't get the car to idle at less than 3000rpm so we new we had a leak after the throttle body as we checked all hoses etc.

Pulled it off last night and the intake had gashed open where the idle control valve outlet is (which is underneath the manifold). Would have thought these manifolds could have handled alot more boost.

Anyway will weld it up and put it back on the dyno..........with more boost.......hopefully.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...