Jump to content
SAU Community

Recommended Posts

Standard gearboxes are fine if you run normal street rubber or drive like miss daisy, but when you throw on some Drag Radials or Semis when they are at temp and use that over 400kw in anger things change in my opinion.

Well, this is from my experience of 2 very sick gearboxes and others I have known with some big powahs that get used in anger that is.

Some guy on here has a shop that hardens the cogs with some chemical or magical dust or something, might be worth looking into that if you plan on using the powahs in anger.

Piggaz is looking into a new box, might pay to see what he has to say as he does a lot of research on his car parts and he doesn't baby the thing.

Got to love big torque.

I dont think even cryo is enough when driving in anger with slicks and over 400kw, some aftermarket boxes use hardened larger input shafts to take the beating, wider gear sets to transmit the load across a wider tooth etc amoungst other things..

Id say the best way is to go auto if its a drag application with hard launches.

Problem is saying auto and GTR in the same sentance is like getting your left nut cut off.

I ran close to 60 passes in the mid 11's on ET Streets with a stock R33 gtst box. Wasnt until the car got a 2 step and the mechanic at the time decided to 2 step it into the burnout in third that it finally gave up. Next to nothing left of third. That was always running a twin plate clutch and 7000rpm plus launches

We ended up putting an OS 1st to 5th set in it, hopefully it lasts :)

I dont have a dyno sheet, buuuut, I made 447kw at 5850rpm and 1120ftlb at 5670 with the 2.8 and 6466 before we lifted the head. Ill have more results by the end of january subject to a head bieng taken off.

Lights the tyres on the dyno. Was teh lulz watching the operator shit himself

  • Like 1

Mine had the alloy plate and that was absolute rubbish...I dont know why I put up with it for a few years.

When I sold it, I was told that OS supplied the incorrect thrust bearing, being a smaller diameter bearing was too aggressive on the diaphragm fingers.

Edited by Marko R1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well, yes, every CU on the bus is available via the Consult port, but whether the scanner you are using is capable of talking to the TCU, the ABS/TCS modules, etc etc, is what is at question here. Many of them are only for engine codes. So, if you have one of those, you won't know if the ABS is having a bitch.
    • That's now. R chassis Skylines come from a time when the tolerance in the ADRs was a bit more....slack. My car, on 235/35-17, which is damn near the exact same size as the original 205/55-16, is pretty much bang on correct indicated speed across the whole legal range. That's demonstrated with constant speed run over 5km, and GPS speed. It's just the luck of the draw. My particular speedo head has to be the thing that is "calibrated" that way, because everything else (the diff ratio, the gearbox and the speedo drive**) are all same same as most other Skylines. **OK, so the speedo drive is a Navara unit to drive the R32's cable, not the electronic unit than an R33/4 would normally have with teh same gear on it. Otherwise, I applaud your OCD tendencies, and I would do the same if I needed to.
    • Not too sure, I believe the Nissan consult port does everything? Also just filled up the reservoir to full and the light is still on. The float seems to move up and down fine.
    • The speedo's can be very conservative, when my Mazda NC MX5 speedo is showing 118kph, the GPS, and a calibrated radar.... cop mate.....hits me at around 110kph +/- 1 or 2 kph, and that is on a 215/45 17, stock tyres size is 205/45 17 as well, so weirdly conservative with stock tyre size When my Commodore speedo red 116kph GPS had me at 110kph on 255/40 17, so again conservative Google says manufacturers need to set the speedo from 4 to 10% slower than actual road speed.....for safety.....and compliance  After doing some offset and clearance measurements to see what can fit the NC on 17x8 +40, without guard rolling or rubbing anything at my current ride height, I've decided that when my tyres are toast, I'm going to fit 225/45 17 and see where that gets me IRT actual speed of my speedo and GPS/radar From the online calculator I should be still be doing around 5kph under an actual 110kph when the speedo is showing 110kph My ADHD requires that when I'm doing 110kph on the speedo, that the actual road speed is actually really close to that, and not alot slower And going from 205 to 225 still keeps the car within the %/mm allowable in the NSW vehicle rules and regulations, which is nice, as long as I'm looking at the latest version that is.....LOL https://www.nsw.gov.au/sites/default/files/2021-02/RMS-13.464-Light-vehicle-modifications-Vehicle-Standards-Information-No-6-November-2013.pdf
    • Take the value it measured as, and pick the closest range available that is above the reading on the screen.   Also, no point just testing the coils. Read what has been said again. You need to test all your wiring, everything.
×
×
  • Create New...