Jump to content
SAU Community

Recommended Posts

I had a big post of the silly adventures of its first night of use...but really. It didnt read well and didnt show me in good light ...and nobody cares....but basically. Radcam works well when sober. Makes sure you are familiar with its operation sober before piloting it drunk! ;)

But it arrived after paying the UK govt a bribe, i mean a tax and now all set for Monday! :)

Edited by Roy

Well, I will post up the Radcam footage in a few days...and will post last years POV footage in a Caterham vs Radcam in a Caterham from today. Basically..Radcam kills it! Sound is a bit funny, took a while to get decent sound, the mic needs a sock for sure to drown out background noise

Well, I will post up the Radcam footage in a few days...and will post last years POV footage in a Caterham vs Radcam in a Caterham from today. Basically..Radcam kills it! Sound is a bit funny, took a while to get decent sound, the mic needs a sock for sure to drown out background noise

We found the built in mic works a treat. It's got auto wind noise reduction. Used em in 6 cars at the Muscle Car masters for Channel 7 on the weekennd and got some awesome footage. Just waiting for permission to post some video. To whet your appetite, here's a screen grab from Glen Seton's BMW, chasing a very familiar and famous GTR.

post-47107-1283802279_thumb.jpg

Edited by martyboy26
We found the built in mic works a treat. It's got auto wind noise reduction. Used em in 6 cars at the Muscle Car masters for Channel 7 on the weekennd and got some awesome footage. Just waiting for permission to post some video. To whet your appetite, here's a screen grab from Glen Seton's BMW, chasing a very familiar and famous GTR.

The internal mic is definitely the go. I've attached a short clip (reduced and pixelated for copyright reasons) to give you an idea of the audio quality. This was in a Aussie race Car with no side windows and the recorder mounted in the front.

Radcam HDPro Audio Demo With Internal Mic

Edited by martyboy26

I tried a few different arrangments. And reviewing all the vids this morning you are right. The first run i did not use an external mic and just had the hand unit strapped to the passenger seat. It seems fine. Perhaps should ot have mounted it so close to the harnesses which just flap around at speed. Thats part of the noise i thought was wind noise.

The run with the external mic up under the dash with no sock is far the worst. The run with my ipod headphone foam thinkgies on the mic seems to be maybe just better then the internal mic. So I guess thats what you get when trying to listen to a crappy laptop speaker at a track day with cars deafening you...maybe shoudl have jsut stuck with the internal mic.

Well i just uploaded some footage to youtube. It doesnt do the quality justice.

See post #5 ... http://www.skylinesaustralia.com/forums/Si...za-t335975.html

I recorded it in 1080 60Hz...and struggling to understand what format to save it in using Windows Movie Maker? Any tips on what format when uploading to youtube , i want to avoid the back box around the footage?

Well i just uploaded some footage to youtube. It doesnt do the quality justice.

See post #5 ... http://www.skylinesaustralia.com/forums/Si...za-t335975.html

I recorded it in 1080 60Hz...and struggling to understand what format to save it in using Windows Movie Maker? Any tips on what format when uploading to youtube , i want to avoid the back box around the footage?

Nice vid. I'm glad you got your camera on time. Mount looks solid on that car. Next time try the built in mic and you'll find it works pretty much anywhere.

Movie Maker doesn't really work well with HD videos. If you just want to trim the beginning and end and save in the original untouched format, then use MPEG Streamclip free from http://www.squared5.com/ is the go. This will give you the best quality on Youtube with zero quality loss. If you want to edit and add titles etc the get hold of a copy of Pinnacle Studio HD http://pinnaclesys.com Save the finished file to MPEG-4 1080 or 720

Also, if you want to widen the view, use 720P. It widens the view to 140 degrees (from 120 for 1080P) Can be good for some shots.

Keep em coming. Cheers from Mark at RaceRecall I've attached some screen grabs from the Muscle Car Masters. Both of these were in the same car, just using the 2 different settings. Hope that helps.

post-47107-1283895401_thumb.jpg

post-47107-1283896568_thumb.jpg

post-47107-1283896635_thumb.jpg

Edited by martyboy26

LOL, that explains why one minute you could see the gear changes and my feet (720p) then the next you couldnt (1080p) :) 120deg vs 140deg :(

Thanks for the links...Not sure i will have time to play with the footage...but will for future vods and the Silverstone vids when i get back to Aus

Edited by Roy
LOL, that explains why one minute you could see the gear changes and my feet (720p) then the next you couldnt (1080p) :action-smiley-069: 120deg vs 140deg :(

Thanks for the links...Not sure i will have time to play with the footage...but will for future vods and the Silverstone vids when i get back to Aus

Why do I bother to include instruction booklets???? No-one ever reads em. LOL!

Instruction booklet? One question....does the camera had a max time record setting? I came in one session and the camera was already stopped. I thought i may have hot the remote in my pocket by accident...bit far fetches but could not explain it....maybe find the instruction booklet :action-smiley-069:

Instruction booklet? One question....does the camera had a max time record setting? I came in one session and the camera was already stopped. I thought i may have hot the remote in my pocket by accident...bit far fetches but could not explain it....maybe find the instruction booklet :action-smiley-069:

No, it'll record until the battery goes flat or the card fills up. When you start the camera up, you'll see a display at the bottom of the screen that shows how much recroding time is left on the memory card. Once it's recording, it shows how long the recording has been running.

Edited by martyboy26

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
    • Wife and I are still looking for a new home. One condition was a large enough garage for a full-size lift in one bay. Now if only we could find something... We've been looking for almost a year now.
    • Thanks everyone for the ideas! Sadly, ramps are a no go for me. With young kids at home, I do most of my work late at night while they're sleeping. Starting the car multiple times wouldn't be a great idea.  I'll go see one of those new long reach low profile jacks and take a couple measurements to see if they will fit.   
×
×
  • Create New...