Jump to content
SAU Community

Recommended Posts

  • Replies 59
  • Created
  • Last Reply

Top Posters In This Topic

thanks for the support, I have been part of the SAU community since 2002 and I started out as clueless as most others and I have gotten sooo much out of the community that half the reason why I don't charge so much is because I feel that i owe something back... I have learnt sooo much and pretty much learnt how to tune on my own with help of friends and some help from these very forums.

I have clocked up hundreds of hours worth of dyno time or more so far and that does not include any of the street tuning etc I have done so I do have a fair bit of experience, I can pretty much do a whole PFC tune remap with bigger injectors in less then 2 hours these days and I keep suprising myself the more I do it.

I will have a think about it a bit more, maybe i just need a bit of a break from it all and should't take things soo personally which is hard because I do take pride in my work and like to think I am good at it.

well when your ready Guilt-Toy, PM me.. I'll be happy to pay for your experience with PFC tuning, reading up on your other threads genuinely proves you know what you're doing, unlike some tuners who just tweak the injection table and nothing else.

I get this alot myself, its an unfortunate side of it . Charging peanuts is usually the problem. People treat you different if you are super cheap, they treat you just like your a mate helping out or something.... its weird, the less you charge , the more they expect and it attracts all the cheap arse idiots who dont have a clue (and think they do!). I learned this early on.

Charge appropriately, and learn to say no if something is not up to scratch. And if they get the shits, then you dont want to deal with them anyway.

As most decent people would know, if something costs you alot, you initially might cringe, however if you are happy with the result, then you soon forget the cost and are left with a smile that lasts alot longer than a cost saving initially.

Confidence to charge appropriately is hard at first, depending on your personality, but you just have to get to that place where you do, else you get to the point where you are now and just throw it all away.

I truly believe there is a niche for the backyard 'techo' guys to do work and tuning, as some guys like the personal service they get,dealing direct with someone rather than a workshop where there is usually not that friendly atmosphere where they feel more comfortable.

Assuming your real good at what you do and take pride in your reputation (this alone will mean you go out of your way to do it right etc). They will keep coming back.... and word of mouth works well.

Saying no will offend the idiots, and you might get a rep as abit arrogant, but then the idiots fade away and people who want quality generally will flow in...... takes a few years but it does work, at least for me.

Hope you may reconsider !

Gary

well said.

Every conversation ive had with GT whether internerd or phone has only ever re-enforced my belief that he is more than competant in what he is doing.

GT it is sad to see you got burned by dickheads but inevitebly it happens to everyone and usually by the person you have gone most out of your way to help..... i.e. its cost yourself money to help them out.... up your prices and vet the time wasters...

Haha, first time he road tuned my car it took him all of about 5 minutes :blush:

and as mentioned before, we checked the AFMs on the dyno, pretty damn impressive!

I have some dyno sheets for you too if you want them, before and after :)

PS: WHEN my turbo dies (little bastard just keeps holding on) I won't be blaming you :wave:

Ah nuts, i was hoping you'd be still keen to hit up Tassie to tune my car (and a few others)

Hope it all works out for you either way you go cobber and all the best with it :D

Johnny, what is your engine worth?

obviously less than $600...he thinks its tuned...but it knocks...have you read his thread?

here tis..

http://www.skylinesaustralia.com/forums/Kn...Ex-t252854.html

Edited by DiRTgarage

More than happy with my GT tune. I got exactly what i wanted and Anthony is a great guy to deal with. I had a few issues with my car and Anthony was gracious through it all.

yeah but I prefer an experienced tuner that tunes as a hobby rather than money if you know what I mean?

More than happy with my GT tune. I got exactly what i wanted and Anthony is a great guy to deal with. I had a few issues with my car and Anthony was gracious through it all.

that's what I like about enthusiasts, they do extra things

and I want a road tune rather than a dyno tune.

and DIRTgarage if you read my post, it only knocks when I hit the limiter..

it's just like comparing a workshop install a head unit into a car vs someone from CarAudioAustralia you will see the difference in workmanship straight away, the same way I prefer to install my own car alarm than going to an auto electrician, I cut all cables to length, solder and only use heat shrinks and disable points at non-generic places.

Do you get where I am coming from?

Edited by johnnilicte
and DIRTgarage if you read my post, it only knocks when I hit the limiter

why is it then that my 585KW 9 second GTR is launched off the limiter on every single pass (and held on the limiter for 3-4 seconds) and doesn't register knock ?

i must just be lucky :D

If yours is running an untouched base timing map as you have stated in your Power FC and after taking fuel out of the rich base injection map it will pop...trust me.

why is it then that my 585KW 9 second GTR is launched off the limiter on every single pass (and held on the limiter for 3-4 seconds) and doesn't register knock ?

i must just be lucky :D

If yours is running an untouched base timing map as you have stated in your Power FC and after taking fuel out of the rich base injection map it will pop...trust me.

because you have GTR knock sensors and he has GTST knock sensors, you can scream "KNOCK" in the engine bay and it will read 150 knock with 25 knock sensors

I first started tuning 5 years ago because DiRTgarage told me it would pull the chicks and I managed to not achieve what I wanted to do and that is to be able to score a bit of casual sex every now and then so id save money on expensive hookers... So yeah it was all about me getting laid :D

the truth finally comes out. :D

Edited by DiRTgarage
Ah nuts, i was hoping you'd be still keen to hit up Tassie to tune my car (and a few others)

Hope it all works out for you either way you go cobber and all the best with it :D

yes damn shame was hanging out for a GT tune. maybe with some good tassie seafood and beer and tassie views he maybe just might reconsider coming down ??

i hope so..

eitherway goodluck with it all Anthony

cheers

Man that sucks a fat one, i wish there were blokes like yourself around up here in north queensland, most of the professional tuners here love lean conditions, its why i am blessed with a popped 26:(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • If as it's stalling, the fuel pressure rises, it's saying there's less vacuum in the intake manifold. This is pretty typical of an engine that is slowing down.   While typically is agree it sounds fuel related, it really sounds fuel/air mixture related. Since the whole system has been refurbished, including injectors, pump, etc, it's likely we've altered how well the system is delivering fuel. If someone before you has messed with the IACV because it needed fiddling with as the fuel system was dieing out, we need to readjust it back. Getting things back to factory spec everywhere, is what's going to help the entire system. So if it idles at 400rpm with no IACV, that needs raising. Getting factory air flow back to normal will help us get everything back in spec, and likely help chase down any other issues. Back on IACV, if the base idle (no IACV plugged in) is too far out, it's a lot harder for the ECU to control idle. The IACV duty cycle causes non linear variations in reality. When I've tuned the idle valves in the past, you need to keep it in a relatively narrow window on aftermarket ecus to stop them doing wild dances. It also means if your base idle is too low, the valve needs to open too much, and then the smallest % change ends up being a huge variation.
    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
×
×
  • Create New...