Jump to content
SAU Community

Recommended Posts

yeah the thizzle figure is very questionable, i would take it with a grain of salt

its the only 300kw GT-RS ive ever seen so wouldnt even use it as comparison

it must have some other mods we dont know about, ie diff gears, different gear ratios, different dyno settings

could be a million things, wouldnt worry too much

most GT-RS's make 260kw and cap there

but the main benefit of the GT-RS is the average power and response

  • Replies 489
  • Created
  • Last Reply

Top Posters In This Topic

Has this question been addressed? Also, what is the equivalent PULP RON (if such a comparison can be made)?

a few motors have been pulled down with no ill effects. e85 also loses power before the knock becomes serious so the tune isn't as much of a knife edge as pulp.

people have been claiming a ron figure of 108-110

a few motors have been pulled down with no ill effects. e85 also loses power before the knock becomes serious so the tune isn't as much of a knife edge as pulp.

people have been claiming a ron figure of 108-110

I like that RON. Sounds very promising. The only thing i have heard is the 10% ethanol stuff can foul up plugs on some cars. I personally never had any issues running boost98 from united in the vl or the 32. Both cars just chewed through it alot quicker.

well the tank is at 1/4 full (my standard refill point) and i have done 220k's, nomally i get 320...

so in essence.... if the price of e85 2/3 of the price of 98 then you are getting a free power increase..... and if its below 2/3 you are actually SAVING $$$

good result, how much timing did you settle on at full load and what afr?

sorry... forgot bout this one

timing 39deg (decided to look @ hand cont... lol)

afr's cant remember the exact figure

my filter flowed fine after 6 months use, I think each car will be different, mates blocked up after only a few months, pull it off and blow thru it, compare to a new one!

Edited by 180or200

I have been very keen to jump onto the e85 band wagon, and have followed this and another similar thread. My big question or thing I would be interested to see...is both tunes one on 98 and other on e85 with same power outputs.

It is proven that e85 will make more power, but how about the engine using less effort to make the same power? Less boost, less stress on components, maybe lower intake temps? then we can compare effects on engine life, fuel efficiency, engine/oil temps and see the other benefits just not more power from e85.

If you can use more timing and less boost to get the same power would you be using less fuel?

Paul.

i doubt it as my car was lean as f**k when it was first started and needed a decent whacck of fuel to compensate... also with the better response its way more tempting to put your foot down :P

just to let all you victorians know...

i rang united head orifice and asked where e85 was stocked and was told hoppers crossing AND buleen... they even gave me the bulleen address!

i went to buleen united today and the is NO e85 pump! (i asked the guy WTF and the only 2 english words he could say were "united" and "boost" lol)

so in vic atm it is ONLY hoppers crossing!

they did say there is talk of a bigger rollout soon, but not in the next few weeks

First post, so I thought it should make a contribution to the group.

Just been looking on the United Petroleum web page for locations. Noticed that the Kingsway (South Melbourne) United site is listed as stocking E85 fuel. This site is at 151 Kingsway, South Melbourne, 3205 and is listed as being open 24 hours a day - for all the night owls.

Here is a link:

http://www.unitedpetroleum.com.au/distributor-information.asp?IDstore=464

ah i didnt know that the kings way one would have E85

thats a big difference, as hoppers is homo-spec

yeah hamish the tune you have is locked, when the PFC is locked, you get 0's everywhere

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
    • Hi, Marek here 🙋‍♂️. I finally fulfilled my longtime dream - recently bought Stagea and now waiting for it to arrive in Poland. There's only few of these in my country, and one of the owners  recommended mi this forum as a source of all the info i'd need since now i own one  so here i am.  
    • Version 1 aluminium airbox is.......not acceptable No pics as I "didn't like the look.....alot" Even after all my "CAD", and measurements, the leg near the fusebox just didn't sit right as it ended up about 10mm long and made the angle of the dangle look wrong, the height was a little short as well, meh, I wasn't that confident that Version 1 was going to be an instant winner I might give Version 2 another go, there's plenty of aluminium at work, but, after having in on and off a few times, and laying in the old OEM airbox without the new pod filter and MAF, there may be an option to modify the OEM air box and still use the Autoexe front cover and filter.... maybe This >  Needs to fit in here, but using the panel, and not the pod, the MAF will need to fit in the airbox though> I'm thinking as the old OEM box and Autoexe cover that is sitting in the shed is just sitting around doing nothing, and they are relatively abundant and cheap to replace if I mess it up and need another, it may well fit with some modifications to how the Autoexe brackets mounts to the rad support, and some dremiling to move it get in there, should give me some more room for activities, as I don't want to move the MAF and affect the tune Sealing the hole it requires to stick it in the air box is simple, a tight fit and some pinch weld will seal it up tight  I am calling this a later problem though
    • and it ends up being already priced in as though you're just on 91RON without any ethanol. Car will lose a bit of economy as the short and long term fuel trims bring down the AFR back to stoich or whatever it is for cruise/idle for the engine.  
    • Oh, you are right. But, in Australia E10 is based on 91RON fuel and ends up being 94RON. Hence it being the cheaper option for economy cars. The more performance oriented cars go for the 98RON fuel that has no ethanol mixed in. The only step up we have left then at some petrol stations is E85.
×
×
  • Create New...