Jump to content
SAU Community

Recommended Posts

^^ if a tank is completely sealed how can 98 go off?

tanks aren't sealed, they have a breather on them which goes to your charcoal canister. 98 goes off because the volatile chemicals evaporate, ethanol is 85% high octane stuff so if you lose some ethanol to evaporation all that happens is you have a bit less fuel than when you started. petrol is low octane base with some high octane additions and if these evaporate then you are left with shit fuel.

the main danger with ethanol is when it absorbs moisture, it will form two different layers in the tank with the water concentrated in one of the layers and this is obviously bad for your motor. it's a much bigger problem in boats because it's easier to get water contamination, in a car it's not so bad but something to be aware of if you let the car sit for long periods of time (especially outside - in a garage it would be fine).

When you say breather, it is a vac line so the tank has constant neg pressure. I can only go by my own previous experience and say if you leave 98 in a sealed container it will turn to crap over a few months, I will know with ethanol after next weeks experiment...

I don't see moisture as an issue in the amounts we are talking about, better that it mixes than sit in the bottom of the tank.

  • Replies 489
  • Created
  • Last Reply

Top Posters In This Topic

It seems to be a popular misconception due to the problems with methanol storage and acidity.

you mean due to rumors circulated by oil companies... ;)

tanks aren't sealed, they have a breather on them which goes to your charcoal canister.

yeeeeees... into my "charcoal canister" which i totally never removed... >_<

Ive had my car sit in the garage for just over 3 months with a full tank of E85. Had no dramas when i drove it again.

i've used some e85 that i had sitting in a 20l sunoco tin in the garage on a milkcrate for over 6 months and it was fine :D

quite a good, comprehensive article

http://theage.drive.com.au/motor-news/is-s...0806-11mog.html

Manildra alone is already sitting on a lake of 100 million litres of fuel-grade ethanol, just waiting for buyers.

>_<:D;)

wonder if these are cheaply available and easy to install/hook-up

There's even a piece of equipment mounted in the fuel tank — very similar to a police breathalyser unit — that can detect how much ethanol is in the fuel and retune the engine's electronics to suit the mix
wonder if these are cheaply available and easy to install/hook-up

Yep the sensors most certainly are. The only problem is you basically need a motec to take advantage of them, basically you need two maps, one with petrol one with e85 and then you need to interpolate between the two using the sensor. Ultimately you would create 4 or so maps in case its not a linear relationship between the two fuels and have the ecu interpolate between them all. Not really that cheap to set up, but very effective when done, almost all new cars from the factory are capable of doing this.

Edited by Rolls

the pricks didn't post my second comment

"To Barry Park: Can I convert my existing Commodore to run on E85?

No"

This is incorrect. Most commodores getting around these days can be converted, and if you got this info to the contrary from Holden, they're basically lying.

They posted my first comment in a matter of minutes, but the above has gone MIA - Barry Park is the author.

EDIT: tried again, still won't post it the pricks.

Yep the sensors most certainly are. The only problem is you basically need a motec to take advantage of them, basically you need two maps, one with petrol one with e85 and then you need to interpolate between the two using the sensor. Ultimately you would create 4 or so maps in case its not a linear relationship between the two fuels and have the ecu interpolate between them all. Not really that cheap to set up, but very effective when done, almost all new cars from the factory are capable of doing this.

motec = $ = problem :)

the link/vipec computers can use the Siemens E85 ethanol content sensor, trent might be interested to have a play around with one and see how it works?

Yeah any computer that allows a 3rd dimension to the fuel/ignition maps will be capable of doing it. As currently most fuel/ignition maps are controlled via rpm and airflow. They have trim maps based on TPS etc sometimes but to use an alcohol fuel ratio sensor you need to modify fuel and ignition, and its not linear, need a complete map.

This could be an awesome excuse for me to get a vipec

cycly idle wank FTW!!!

I'm doing another formal drop off at the end of this year and im thinking the cycle idle on the Vipec going into my car will come in handy :P

But yeah the Vipec being able to adjust the map with the sensor in the tank for the E85 sounds like a great plan!

Edited by PM-R33

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hey keep the ideas coming, I'm always keen on projects! But, problem fixed!  I got a cheapie ozito scope from Bunnings and had a good look in and around the bearing and sensor hole. I couldn't see a smoking gun but the bearing looked a bit strange, especially when comparing with a new one. I thought the cover had come off the bearing magnets.  Sorry for pics of a screen, I didn't have an SD card.     Good thing I had the old one to inspect. So, given I'm like a pit crew with wheel bearings and luckily I had a spare bearing because I f**ked up my parts order, I decided to just smash it out. Got the old one out in about an hour. So much easier when the parts haven't had a chance to rust together yet. 😂 And, well, found the problem.    In the second pic at about the 8 o'clock position, you'll see what I think is the tip of the old sensor.  The new sensor has definitely been rubbing but it's all intact, just a little shiny so I'm hoping it's fine.  The car brakes perfectly now and no errors.  I think the job took about 2.5h in the end. 👍🏻 I really appreciate the help in here as usual. Thanks guys.
    • I was only looking because I saw some drops on the ground but it wasn't alot. Recently had it serviced will ask the mech to confirm. Find it strange that it looks standard though, can see in another photo of a random box 
    • So...not sure if you know if that has always been there or why you went looking. It could be old damage from a clutch explosion, or even just the gearbox got dropped somewhere along the line. Basically, you should seal it up to stop oil and dust getting into the bellhousing, but it doesn't matter too much and is not structural. I'd suggest something like a glob of JB Weld. BTW what gearbox oil are you running, I would guess the breather has been spewing it everywhere.
    • Hey Duncan thanks for your reply. Sorry mate I know the photos are shit.  Took another photo for reference. Seems the casing does have a hole in it looking on the net, fluid seeping out. Added a photo   
    • Very hard to make out what you mean, is it the squarish hole with redline shockproof (probably) under it? Is that pic from on top of the engine with the firewall to the left of pic and engine to the right? Either way, spray the area liberally with degreaser and try again, maybe circle the part you are worried about
×
×
  • Create New...