Jump to content
SAU Community

Recommended Posts

Little update:

This is from the very first ATR43SS1PU (or referred as a small trimed ATR43ss2) which was fitted to a R33 with rebuilt auto:

259power.jpg

259boost.jpg

In general Auto would lose around 20~25kws depending on how it was treated. So manual result would be around the 280rwkws mark.

Any way, SS3 with .83 dual gate rear is built. Will be tuned this weekend, hopefully getting the 350rwkws+. The GenEses charger is almost ready, will post some photos later in the week.

When you say the auto is rebuilt do you mean a standard rebuild or it has been modified, been thinking about going auto just unsure how much rwkw they hold standard and how much needs to be done to them to hold around 300rwkw as a manual

When you say the auto is rebuilt do you mean a standard rebuild or it has been modified, been thinking about going auto just unsure how much rwkw they hold standard and how much needs to be done to them to hold around 300rwkw as a manual

Think MV's rate them to 320rwkw with just a shiftkit and big trans cooler

cheers

darren

Think MV's rate them to 320rwkw with just a shiftkit and big trans cooler

cheers

darren

Thanks for the info, been thinking about making mine auto for a while, if thats all it needs then i may just do it!

yes Auto spools faster and no boost lose during gear shift. They can sit there and do burn out all day.

yeah i drove a boosted auto r32 onetime and totally loved it..just floor it and hold on to the steering wheel while you drive down the road sideways :D

much better and faster for street and drag racing than manual...

I have one for sale too :)

I wont be doing it for a few months but pm me details and i'll drop you a line when im ready to do it and see if you still have it.

Need ATR43G3 or G4 to work on the RB2530det. Not sure about SS3 in .83 but all other SS series are too small for that engine.

35iolme.jpg

Heres my 30/25det with ATR4G3. Only revs to five grand as injectors ran out of flow and we were unable to get it to hold low boost to rev the thing out.

I will reupload once its tuned with new injectors to find out what it can really do.

I shit my pants on 19psi.

You do get used to it though, very quickly :( Already considering upgrading again. But the amount of money I would need to spend just to get 40-50 more hp, can't justify it at the moment. Maybe when I can afford to forge then I'll go all out.

You do get used to it though, very quickly :( Already considering upgrading again. But the amount of money I would need to spend just to get 40-50 more hp, can't justify it at the moment. Maybe when I can afford to forge then I'll go all out.

You can get up to about 300rwkws safely on 98 fuel with stock engine. Ask Stao to upgrade it to a G3 with .82 rear housing, He's done it to a mate for $200. Very big difference in power delivery.

Edited by GeorgesR34

You do get used to it though, very quickly :( Already considering upgrading again. But the amount of money I would need to spend just to get 40-50 more hp, can't justify it at the moment. Maybe when I can afford to forge then I'll go all out.

Which turbo do you have? I've got the ss2 and the feeling everytime gets me pumped. Do you run e85? Forging the motor won't give more power, only forge if it pops otherwise I'll be buying an rb30 block :)

You can get up to about 300rwkws safely on 98 fuel with stock engine. Ask Stao to upgrade it to a G3 with .82 rear housing, He's done it to a mate for $200. Very big difference in power delivery.

Yes, I'm currently making about 260rwkw. Thing is with sending off my turbo for Stao to modify, I live in Perth... So that's a huge down time for my daily confused.gif

Which turbo do you have? I've got the ss2 and the feeling everytime gets me pumped. Do you run e85? Forging the motor won't give more power, only forge if it pops otherwise I'll be buying an rb30 block :)

I've got the G2, .64 housing. It's still just as quick, it still scares the pants off any mates that get in my car. It's just that I'm used to it now, 350rwhp got old quicker than I expected :(

No E85 in Perth, not at the pump anyway. I know forging won't give more power haha, I meant that when I can afford it I might forge and go for 500+.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...