Jump to content
SAU Community

Recommended Posts

This is the new SS2 prototype trail using the external gate turbine housing. It actually made about 300rpms better in response. how ever didn't help when the car caught in fire. lol. One of the rubber hose expanded under pressure and torched on the exhaust manifold. Well, made 293rwkws when fire broke out. lol. Will do a bit more trailing in later stages.

power.jpg

booost.jpg

looks very nice @ only 20psi too

Impressive, how is the heat with this one, could you drive it for 10 minutes in the hills flogging it non stop at ~4k on full boost without it starting to detonate or lose power?

Also what is with the torque dip when it hits full boost, lots of your dyno graphs seem to have this, is there any reason?

Edited by Rolls

This one is pretty alright. Wasn't getting very hot. Turbo was ok. We didn't get too many runs as the rubber hose caught on fire. Floged it this morning with all the rubber hoses replaced and its so much fun with external gate.

not getting hot...but vacuum lines caught fire?

this thread can bring the lulz at times

If a rubber vacuum line touched a stock dump running stock boost it would probably catch fire.

It's probably not very important to some, but for what it's worth I flogged my car for three days straight at Powercruise this weekend and it loved it. Not a single issue at all, and the performance of the G2 was great. Didn't get too hot, just kept going all weekend.

Stao, I'll be watching this thread closely. Keen on an externally gated turbo capable of 300rwkw that doesn't lose too much response without having to change too much of the stock setup. Going to look into water/meth injection to keep things cool. The turbo you're working on at the moment sounds like it could be the perfect fit.

awesome! what turbo is he running?

That was a old TR44 turbo. They are the ancestors for the current ATR43G3. I still have few housings and wheels for those used as door stoppers at moment. Can put them together for $450 with 12 month warranty for any one whom wants one. Externally gated only.

Also some winton drifting footage from Abe's car. It made 290rwkws using the old ATR43G3 none FNT version.

Capture34.JPG

Capture36.JPG

Its currently making 347rwkws with the FNT update on E85. Should be seeing him hitting the track soon.

Edit / add:

The youtube quality sucks, you can down low the raw footages from links below:

Door mounted camera

http://www.digi-hardware.com/photos/abphotos/sidecam.wmv

Roof mounted camera

http://www.digi-hardware.com/photos/abphotos/topcam.wmv

That is enough evidence for me.

Agreed on the too many turbos thing zebra.

Something like this would be fantastic

turbo name, specs @ x psi, peak kw, peak nm, peak torque -25% from x-y rpm (eg 3500-6500rpm), cost, internal/external gate/housing type

Edited by Rolls

Stao - Can we get a run down of all the products you currently offer....Ive tried looking back through this thread but info is all over the place

Pretty much what ever you see on our website. Here is a mixed of older, current and under development products. Once a better product is developed, the older version of it is automatically discontinued and replaced. Just like the ATR43G3s built in 2008 is a completely different turbo to what it is today.

The Youtube video quality is so bad compare to my original footage, I’m seeing many familiar cars. Yours might be in the footage. I will post an http link once they are uploaded.

Is it possible to compile something like what I said stao? I saw that you put quite a bit of effort into overlaying all your graphs in the past, would most likely be less work to do this. :)

Could we get some footage of you flattening the throttle at 2k in 3rd gear until like 6k or something? I'f you could film the tacho that would be fantastic, love to get an idea of the transient response on the road. :)

Could we get some footage of you flattening the throttle at 2k in 3rd gear until like 6k or something? I'f you could film the tacho that would be fantastic, love to get an idea of the transient response on the road. :)

Ill get this footage tomorrow. Ill try to push it as far as I can. Did anyone notice the XR6 lol.Tailgated me a fair way waiting for me to run him.

Edited by SargeRX8

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...