Jump to content
SAU Community

Recommended Posts

Interesting to see that he could only make similar ~280rwkw as well whereas on your car and others it has made 300rwkw+. Wonder what is/was holding them back.

Note he was only running 18psi, I made 289rwkw@18psi on my hub dyno run, so quite similar. I believe Stao on his 320rwkw run was boosting to 23psi? In any case, I'd say you will need to run at least 20psi to crack the 300 mark on pump 98.

Edited by Hanaldo

Yup can see the improvement there. Also the hit of boost is slightly smoother so would give the tyres a bit more chance of holding on with the FNT.

Interesting to see that he could only make similar ~280rwkw as well whereas on your car and others it has made 300rwkw+. Wonder what is/was holding them back.

E85 & more boost, gogo

Note he was only running 18psi, I made 289rwkw@18psi on my hub dyno run, so quite similar. I believe Stao on his 320rwkw run was boosting to 23psi? In any case, I'd say you will need to run at least 20psi to crack the 300 mark on pump 98.

Nope, Stao made 305rwkw with the exact same turbo I had and was only running 18psi also.

E85 & more boost, gogo

See how my boost is dropping to 15.5psi. No matter what I did to raise the boost it would drop back to 15.5psi. So no point in increasing it for it then to drop off up top.

See how my boost is dropping to 15.5psi. No matter what I did to raise the boost it would drop back to 15.5psi. So no point in increasing it for it then to drop off up top.

More midrange punch

See how my boost is dropping to 15.5psi. No matter what I did to raise the boost it would drop back to 15.5psi. So no point in increasing it for it then to drop off up top.

There is an adjustment on the back of the turbo, you can adjust the creep amount with an allen key. Stao can give you advice to doing this.

I think the outcome is that you will boost higher up top than down low, but thats not really an issue if you just turn the boost down to suit

Nope, Stao made 305rwkw with the exact same turbo I had and was only running 18psi also.

Oh are you talking about the PU high flow? I was referring to the G3.

Got a graph of Stao's run? I can only find the one where he made 295@18psi with that turbo.

More midrange punch

Yeah true I just dont like the feeling of torque dropping off.

There is an adjustment on the back of the turbo, you can adjust the creep amount with an allen key. Stao can give you advice to doing this.

I think the outcome is that you will boost higher up top than down low, but thats not really an issue if you just turn the boost down to suit

Hmmm havent heard of that?? Any more details? We tried all the studs to reduce the size of the wastegate path to hopefully increase boost up top but couldnt do it. I think my intercooler could have been restrictive.

Oh are you talking about the PU high flow? I was referring to the G3.

Got a graph of Stao's run? I can only find the one where he made 295@18psi with that turbo.

Yeah talking about the PU high flow. Sorry your right Stao made 295rwkw on 18psi and 305rwkw on ~21psi.

there are two alen keys next to the flapper, did you try those?

it could be that you are getting so much volume through the mid range that you cap it out early and cant do anything about it.

either way your results are already good lol

Yeah true I just dont like the feeling of torque dropping off.

It wouldn't be dropping off any more than it is now, I guess the slope would be steeper, but you'd still have more power/torque under the curve.

The torque curve was pretty wide on mine and abes. It Might have some thing to do with his return flow cooler. Thats the one went burning hot after 1 run and took 3 mints to cool.

Is that correct? Hareys cooler got hot after just 1 run?

If so you should definitely change that mate, that would be holding you back a long way.

You talking about my old intercooler Stao? Didnt know it was that bad? Anyway I changed to an ARC return flow when I changed to the SS1 turbo. So unfortunately cant directly see the difference, except Trent said after 15+ dyno runs the temps were excellent.

Not Jeffs. The other car with the G3 has a made in china return flow that went burning hot after 1 run and took agers to cool. Buy the cross over ones like mine with a decent 600x300x75mm core. That gives the best performance.

Tao, I wanna come past tomorrow and talk to you about high flows / get you started on one for me, as I'm biting the bullet on getting one. When is a good time?

Tao, I wanna come past tomorrow and talk to you about high flows / get you started on one for me, as I'm biting the bullet on getting one. When is a good time?

Highflow? Get a SS1.5 PU. Be a man. Do da right fing.

After talking to Tao and testing his car, we've arrived at an SS1PU highflow as my choice. Stock looking compressor housing with modest power and hopefully only a little laggier than the standard turbo. Was very impressed with the Taomobile's power, the thing just wants to eat gutters above 4500rpm in any gear, but it's a bit laggy for my liking and daily driving. Can't remember what turbo he had fitted, but I'd rather more useful power and hopefully the SS1PU fits that bill. Will post results when I get installed and tuned :thumbsup:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...