Jump to content
SAU Community

Recommended Posts

Does look clean..dont think I have seen a yellow one before...

Should look clean, everything went through the acid bath or sandblaster at work. Respraying yours yellow now?

Prob Just a pod. Haven't bought hoses yet to fit inlet. Dummy fitting crossover pipe now to check recirc hose fitment. I'll take pics as I go scotty. Also dump pipe fouls on a/c drain so will double heat wrap dump pipe at that section and maybe remove outer black tube.

Made any heat shields for these Scott? Could pick up off top 2 dump pipe bolts easily. Might have a crack at something once it's going

Since my car's off the road, I've managed getting Brae to have my existing manifold modified for an 50mm external wast gate.

rb25manifold1.jpg

rb25manifold2.jpg

We are also in the process of making an simpler exhaust manifold that is in factory style with larger inner diameter made to support an 50mm external gate (or can be left internally gated) at a very affordable price. It should be a bolt on item to factory setup, and holding the turbocharger in factory position. It is designed for for the ATR43 bolt on series or any standard bolt on high flows, I will have that trailed when it becomes first available.

Don't like lobster alloy pipes? Sorry if it isn't pretty enough for you. :P

The inside is dead smooth, it will make the power, with no bov reversion. Can you post a pic of your design?

Yeh but it doesn't say Greddy and you can't see yourself in the polished reflection.

I make practical intakes that work, not fap toys. lol.

Exactly my thoughts mate, your product is proven to work, is good value for money and I cant wait to get one installed on my ride :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...