Jump to content
SAU Community

Recommended Posts

  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

From what I know through some industry contacts, I can tell you that GM Aust is now trying to sell commodores directly in the US under the GM badge as police cars.

GM Aust has built one protype car for the LAPD. It is based on the VE however the equipment list is different from the Aust spec VE's used for our police.

The reason for this is that the americans require a large car with load carrying capacity and a V8 engine for pursuit. Ford US currently makes a car for most law enforcement in the USA, however this car has been scrapped under the Ford restructure that Obama made happen in order for Ford to get a $9bil us loan.

GM Aust have also shown this new prototype to Russia and several european countries. Most of Europe gave it a very cold shoulder.

GM Aust are hinging their hopes on the sale of this car to US authorities, it would represent about 70,000 vehicles per annum and would ensure that GM Holden stays in operation in Aust.

There are several things that could cause this to fail.

- US car unions not allowing that volume as imports

- GM USA going under

- The car failing field tests

- Aust unions and work shut downs

- Aust component manufacturers going under and GM not having the bits to build the cars.

If GM Aust was to fail there are several viable options.

- All manufacturing moved to either Thailand or china or commodore

- No commodore or variants and all GM product imported

- Manufacturing her in Aust closed and moved to existing plants in either Thailand or China

It Would effect tier 1 and teir 2 parts suppliers here in Aust as well as many dealerships who have already had to battle with loosing floor plan finance and are currently running the lowest amount of new car stocks in around 20 years.

Many teir 1 and teir 2 component suppliers would most likely close. And those that dont close would have to lay off staff to survive. Which is what happened to me 3 weeks ago.

More car dealers would close.

The other factor in Aust to watch out for is the upcoming release of the chinese cars now that a couple of them have been able to pass ADR testing.

The Lifan 520, GWM and Cherry cars will hit the market hard and offer new cars much cheaper than the existing offers from any manufacturer we currently have here.

Sources - GM Holden Marketting, Atteco Aust (importer or Cherry and GWM)

I'm sceptical about the impact that selling Chinese cars here would make, China is always going to be synonymous with cheap shit.

Interesting comment about the US police car thing though, I imagine there would near be a f**king riot over there if their car manufacturers are all going up the shit and they start to import a shitload of aussie cars to use in their police fleet lol. Would be cool to see though.

I'm sceptical about the impact that selling Chinese cars here would make, China is always going to be synonymous with cheap shit.

I totally dsagree. Korea is already cleaning up their image quality wise, and let's not forget how japanese cars were viewed in the 70s and 80s. And there was a time when America was seen as building quality cars.

With time we will all be driving chinese cars (or just built in china). And then some other country will start making cheap cars. And so on.

Ford US currently makes a car for most law enforcement in the USA, however this car has been scrapped under the Ford restructure that Obama made happen in order for Ford to get a $9bil us loan.

Hmm, i didn't think ford actually took up the offer on that government loan, that they were still going it on their own?

It makes you wonder hey. If the big guys like GM etc are going under, how are the small business owners coping

(OT)

I'm feeling it myself. my yearly takings are down by 1/3 compared to last year.)

(/OT)

they did this to Oldsmobile back in the 90s. thats gone by the wayside.

pontiac - last real ones they did were in the late 60s (GTO) the 90's stuff was crap the 80s stuff wasn't much better. to be honest they were mostly panel swaps anyway. the base frames were the same.

SAAB, there's a worry. swedes will resume that company and it will go on. only thing that affects is opel really. and that doesnt affect this market anyway.

I'm sceptical about the impact that selling Chinese cars here would make, China is always going to be synonymous with cheap shit.

Interesting comment about the US police car thing though, I imagine there would near be a f**king riot over there if their car manufacturers are all going up the shit and they start to import a shitload of aussie cars to use in their police fleet lol. Would be cool to see though.

Yes I agree with you on that one...Knowing how the US will always support local manufacturing as opposed to an import, I very much doubt that Holden will succeed in pulling that deal off. If Holden goes down it would be a catastrophe here. Imagine the follow on effect. Part manufacturers would close down immediately Job losses in the thousands...Time will tell

It makes you wonder hey. If the big guys like GM etc are going under, how are the small business owners coping

Lets not forget that these were poorly run companys with too many execs getting way too much money, i personally think that one of these companys should have been left to rot before the government offered any bail out, that way they would get the message that if you dont start doing things right, your next, the execs are so bad that when they went to meet with the government with there hand out they all went there is seperate personal jets, these are the same people who are saying they are broke and need a hand out.....

Edited by W0rp3D

Asides from the jobs of the honest man and the suppliers, if Holden went down, nothing of value would be lost. Seriously.

Their cheap cars cannot compete with the Japanese and their expensive ones cant with the Europeans. GM is a dinosaur that should have died in the iceage. I've got no sympathy for a company that willingly puts a blindfold on and pretends that the world dosent change. GM/Holden's death is inevidable, better now than later. the only way Holden can survive is a complete change in direction.

And remember as well. no commodore drivers = safer roads.

pontiac - last real ones they did were in the late 60s (GTO) the 90's stuff was crap the 80s stuff wasn't much better. to be honest they were mostly panel swaps anyway. the base frames were the same.

-----------------------------------------------------

you took the word right out of my mouth - Pontiac dead - good riddance - never built anything exciting or with super hot body style since the 1966-67 series Pontiac GTOs

GM, Chrysler et al squandered any right to stay in existence a long time ago - look at the Chrysler made garbage on sale here in Australia right now - a rationalised American car making industry is long overdue

Well one would have thought that by now the Indian car makers such as Tata would have been able to grab more of a market share here with their cheaparse utes etc. I guess time will tell though.

The India cars that i have seen are very different in that they have very small engines and are really only suitable to throwing a couple of grocery bags in the back and putting around a CBD like area.

The cars coming out of China on the other hand are more sized like the sedans we currently see. There uses are a mirror of what we Aussies currently use cars for. So it makes sense why a) we would see them here, and b) why they would sell.

You've gotta remember as well that not everyone buys a car because of it's features/build/performance. Some people really don't give a crap and literally buy something to get them from here to there and more so something as cheap as possible. And if you think this is wrong, please explain the existance of the Holden Camira :-)

The India cars that i have seen are very different in that they have very small engines and are really only suitable to throwing a couple of grocery bags in the back and putting around a CBD like area.

The cars coming out of China on the other hand are more sized like the sedans we currently see. There uses are a mirror of what we Aussies currently use cars for. So it makes sense why a) we would see them here, and b) why they would sell.

You've gotta remember as well that not everyone buys a car because of it's features/build/performance. Some people really don't give a crap and literally buy something to get them from here to there and more so something as cheap as possible. And if you think this is wrong, please explain the existance of the Holden Camira :-)

The existence of the Holden Camira (Wheels Car Of the Year, no less :P ) can be explained quite simply. It is what happens when a corpulent, out of touch car company decides it needs a new small/medium sized car. Then designs something that may have been half decent were it not so the fact they couldn't design/manufacture a ham sandwich to spec.

As dreadful as the Camira was, you should check out the Cadillac version.

See here:

http://wikicars.org/en/Cadillac_Cimarron

http://images.google.com/images?hl=en&...mages&gbv=2

Perhaps even more scary was the Daewoo version foisted on poor, unsuspecting punters years after the Camira had been euthanaised.

None of which explains the Toyota Camry. The anti car if ever there was one.

The existence of the Holden Camira (Wheels Car Of the Year, no less :P ) can be explained quite simply. It is what happens when a corpulent, out of touch car company decides it needs a new small/medium sized car. Then designs something that may have been half decent were it not so the fact they couldn't design/manufacture a ham sandwich to spec.

As dreadful as the Camira was, you should check out the Cadillac version.

See here:

http://wikicars.org/en/Cadillac_Cimarron

http://images.google.com/images?hl=en&...mages&gbv=2

Perhaps even more scary was the Daewoo version foisted on poor, unsuspecting punters years after the Camira had been euthanaised.

None of which explains the Toyota Camry. The anti car if ever there was one.

bahahahahahaha

Surely you're joking re car of the year?

Why are people paying out on cars that were designed for a market they successfully found? Just because a car isn't to your liking doesn't mean it did not serve it's purpose for which it was built. Holden's "niche" in the world has always been the family man with two kids, towing trailers/caravans/boats over long distances and relatively shitty roads. It's the reason our affordable sports cars are based on our family sedans and any other attempt at an affordable sports car in Australia is usually met with failure. Australian conditions are one of a kind, and Australian cars last throughout those conditions. You can hate on them as much as you like but they do their job. Then you have the aesthetics of it, wherein many Australians agree that the import companies rob from their design departments and give to their engineering (*cough* Toyota). The Europeans, as nice as they are, are nice for a reason. And the average Australian just can't afford it, hence they are turning to fuel efficient imports. I agree, when it comes to technologies the Australian cars have always been behind on the rest of the world (bar the airbag), but there's only so much you can put in a car and now Holden/Ford are playing catchup on a technological plateau that is now 90% focused on inventing an alternative to petrol. If you haven't been in / test driven some of the latest offerings you might be surprised at the luxuries and quality of them. Then you can convert one to LPG (or better yet liquid injection) and be laughing.

It reminds me of the bullshit argument I hear so often from friends about "this engine producing more power than that engine, despite being half its size", ignorant of how important torque and power bands are to the vehicle's purpose. Diesel engines anyone?

Edited by Birds

Wheels car of the year is not a prestigious award when you say the following:

Leyland P76

Holden Camira

In industry circles it means jack. Esp when the major sponsor is..........Holden!!!!!!

If the VE Commodore can get car of the year why not the Falcon with 5 star Ancap across the entire range?

Sif be Camira hating! those things are near indestructible! same goes for the Camry! They come under the heading of 'good thrashers' lol. Wheels does seem to be targeted towards more the kind of readers who are also into the NRMA/RACV magazines, ie boring baby boomers with a family.

P.S best mate and I did the rounds of the dealers out of boredom last monday, and the build quality of the VE's and FG's we looked at was shithouse, especially the fabrics used in the seats and interior plastics. They both felt flimsy, cheap and ugly, the VT/VX were of much better quality. You can tell where the corners have been cut.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Next on the to-do list was an oil and filter change. Nothing exciting to add here except the oil filter is in a really stupid place (facing the engine mount/subframe/steering rack). GReddy do a relocation kit which puts it towards the gearbox, I would have preferred towards the front but there's obviously a lot more stuff there. Something I'll have to look at for the next service perhaps. First time using Valvoline oil, although I can't see it being any different to most other brands Nice... The oil filter location... At least the subframe wont rust any time soon I picked up a genuine fuel filter, this is part of the fuel pump assembly inside the fuel tank. Access can be found underneath the rear seat, you'll see this triangular cover Remove the 3x plastic 10mm nuts and lift the cover up, pushing the rubber grommet through The yellow fuel line clips push out in opposite directions, remove these completely. The two moulded fuel lines can now pull upwards to disconnect, along with the wire electrical plug. There's 8x 8mm bolts that secure the black retaining ring. The fuel pump assembly is now ready to lift out. Be mindful of the fuel hose on the side, the hose clamp on mine was catching the hose preventing it from lifting up The fuel pump/filter has an upper and lower section held on by 4 pressure clips. These did take a little bit of force, it sounded like the plastic tabs were going to break but they didn't (don't worry!) The lower section helps mount the fuel pump, there's a circular rubber gasket/grommet/seal thing on the bottom where the sock is. Undo the hose clip on the short fuel hose on the side to disconnect it from the 3 way distribution pipe to be able to lift the upper half away. Don't forget to unplug the fuel pump too! There's a few rubber O rings that will need transferring to the new filter housing, I show these in the video at the bottom of this write up. Reassembly is the reverse Here's a photo of the new filter installed, you'll be able to see where the tabs are more clearing against the yellow OEM plastic Once the assembly is re-installed, I turned the engine over a few times to help build up fuel pressure. I did panic when the car stopped turning over but I could hear the fuel pump making a noise. It eventually started and has been fine since. Found my 'lucky' coin underneath the rear seat too The Youtube video can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44&t=6s
    • It was picked up on the MOT/Inspection that the offside front wheel bearing had excessive play along with the ball joint. It made sense to do both sides so I sourced a pair of spare IS200 hubs to do the swap. Unfortunately I don't have any photos of the strip down but here's a quick run down. On the back of the hub is a large circular dust cover, using a flat head screw driver and a mallet I prised it off. Underneath will reveal a 32mm hub nut (impact gun recommended). With the hub nut removed the ABS ring can be removed (I ended up using a magnetic pick up tool to help). Next up is to remove the stub axle, this was a little trickier due to limited tools. I tried a 3 leg puller but the gap between the hub and stub axle wasn't enough for the legs to get in and under. Next option was a lump hammer and someone pulling the stub axle at the same time. After a few heavy hits it released. The lower bearing race had seized itself onto the stub axle, which was fine because I was replacing them anyway. With the upper bearing race removed and the grease cleaned off they looked like this The left one looked pristine inside but gave us the most trouble. The right one had some surface rust but came apart in a single hit, figure that out?! I got a local garage to press the new wheel bearings in, reassemble was the opposite and didn't take long at all. Removing the hub itself was simple. Starting with removing the brake caliper, 2x 14mm bolts for the caliper slider and 2x 19mm? for the carrier > hub bolts. I used a cable tie to secure the caliper to the upper arm so it was out of the way, there's a 10mm bolt securing the ABS sensor on. With the brake disc removed from the hub next are the three castle nuts for the upper and lower ball joints and track rod end. Two of these had their own R clip and one split pin. A few hits with the hammer and they're released (I left the castle nuts on by a couple of turns), the track rod ends gave me the most grief and I may have nipped the boots (oops). Fitting is the reversal and is very quick and easy to do. The lower ball joints are held onto the hub by 2x 17mm bolts. The castle nut did increase in socket size to 22mm from memory (this may vary from supplier) The two front tyres weren't in great condition, so I had those replaced with some budget tyres for the time being. I'll be replacing the wheels and tyres in the future, this was to get me on the road without the worry of the police hassling me.
    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
×
×
  • Create New...