Jump to content
SAU Community

Recommended Posts

some video from QR yesterday. Clubman and Sprint Tracks. Clubman is a fun little track, but Sprint still bores me to tears... the new surface is really good - no bumps in the turn 1 braking area and that giant bump in the middle of turn 2 is gone too. 9 tenths faster on Clubman than last time I went there a couple of years ago. Might go back in winter with my lower diff gears in to see if it can go a bit faster.

  • 3 weeks later...

I did the Mt Cotton hillclimb on the weekend in the 180SX. Bit dissapointed with my times, but it was only my second hillclimb in 5 years and I really struggled to get my head around it all again. Took me till the 6th run of the weekend just to get the first corner right FFS!

Had some front pad knock off, leading to a couple of rear brake lockups in the first downhill braking zone. So I was having to pump the pedal up with the left foot while negotiating the tricky exit of the first loop, nicknamed 'lover's leap' because of its sharp drop off - which was a bit distracting. I was still driving like an old mole through that 1st loop (in both directions) by the end of the weekend, so hopefully there's better times to be had by getting more used to the place again and pushing harder.

Still not sure which gear to use in the hairpin either. I recently changed from the stock 4.083 diff to 4.363 to try and help at Lakeside and QR, but I think it hurts at Mt Cotton. The taller diff would help make 1st gear more useable. Softer spring rates would probably work better at that low speed track too.

I got my best time on the last run of the weekend after a long delay for an oil-down in that first loop by a caterham three cars ahead of me in the queue - I took it so easy through there I couldn't believe I got a decent time! I ran two 48.1's on Sunday, but that's miles away from where I wanted/expected to be. To put it in perspective these are the times I've done in previous cars:

48.3 in a 145rwbhp L20 powered Datsun 1200 on A032R's

46.3 in a 300rwbhp CA18DET Datsun 1200 on nice soft Toyo RA1's

46.2 in my old R32 GTR - never dyno'd but only had Mines ECU, 0.9bar, exhaust and coilovers on puny little 225/50 R16 SR (hard) compound RE55S on stock rims. Would have been a rocket with some nice soft 255s. Shouldn't have sold it!

48.1 in the 270rwbhp 180SX was pretty dissapointing - only a couple of tenths faster than my old two litre Datto! anyway, here's some vid of me driving like an old woman around Mt Cotton:

Edited by hrd-hr30

I think I used the full url from the address bar at the top of the browser. Paste that into the 'insert media' button.

Got the split timing form Mt Cotton. The 180SX loses almost all its time in the first sector compared to my other cars. It matches the GTR in the second sector and there's just a couple of tenths in the third sector which I can probably make up, but that first sector is a bit of a surprise.

I remember the GTR being awesome of the slippery concrete launch pad, and would be better out of the tight first turn with its taller first gear and AWD traction, but 1.6seconds? That's a lot of time! The 1200 was very good off the line in 2nd gear as well with the soft RA1s, and very fast up the hills with 310rwbhp & 950kg.

At least I can see the car isn't completely hopeless around the rest of the track and know what I have to work on next time. Might make some changes to the car too...

post-15659-0-67557200-1330215551_thumb.jpg

  • 2 weeks later...

went back to QR yesterday to see if the diff change helped. Beat my PB by 4 tenths, so I'm pretty happy with that. Here's a short 2min video - PB on 2nd lap:

Edited by hrd-hr30

My spin at over 200 km/h last Sunday.

http://www.youtu.be/scMvltta0Yk

bloody hell, not alot of room there! Got away with it unscathed though by the sounds of it?

Was the pedal slightly 'longer' than normal when you got on the brakes there?

Was it you who bought that front bar from a 33 I had?

I can see why you need it... Crazy!!

Yeah I think it was you I bought a front bar from. The GTR style bar with standard indicators. I did a test fit and other things grabbed my attention. Hopefully it will be going on in the next month or so and then I will be looking at an under tray with a small lip.

bloody hell, not alot of room there! Got away with it unscathed though by the sounds of it?

Was the pedal slightly 'longer' than normal when you got on the brakes there?

Not a lot of room at all and got away with it. The tyres are not exactly round at the moment.

Pedal was all good, actually my next run I did was only 0.064 secs slower than my fastest time of the day. So backed it up pretty good.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
×
×
  • Create New...