Jump to content
SAU Community

Recommended Posts

  • 3 weeks later...

i had to reformat my ps3 today. reinstalled gt5 (twice due to it being stupid). then had to download all the updates. fuck me that was a pain in the sphincter. about 2gb to download all of them. after downloading and installing half of them an error occured. even though it had installed 5 of the updates, because of the stupid way it does it, i had to start all over again. 2 of the updates that it had already installed were 608mb and 1192mb, which it had to download again. so it took about 5 hours all up to install and update. really wish they would allow you to download the game updates on a pc to the install via usb, like you can with system updates. would mean that you could just download each new update as it gets released and then if you have to reinstall the game you can just plug in a usb stick and apply all the updates from that.

cant say ive had an issue like that.

When switching consoles from my old YLOD model to my new one, it was a simple transfer (after getting the old one running again)

otherwise the only time ive had an issue of it dropping out is on my brothers PS3, when we installed GT5 we also had 4 other comps interneting at the same time and it had a little error in the last 3% of the updates (all of them):angry:, but it had only forgotten about 300mb the next time round. so no big issue

i feel your pain, just spend the last 6 hours ridding my PC of a virus, and attempting to recover lost data.

completly ruined my GT5 session, was half way through a dam race too >_<. but almost done, i'll be online racing for quite a long time tomorrow

so drop into the room and have a few races if you guys are bored. i'm usually in the Japanese GT300/GT500 rooms

cant say ive had an issue like that.

When switching consoles from my old YLOD model to my new one, it was a simple transfer (after getting the old one running again)

otherwise the only time ive had an issue of it dropping out is on my brothers PS3, when we installed GT5 we also had 4 other comps interneting at the same time and it had a little error in the last 3% of the updates (all of them):angry:, but it had only forgotten about 300mb the next time round. so no big issue

i have it drop out all the time when doing updates over wifi (router boots it off. router is a piece of junk. restarts itself every few hours). this time i had it connected via ethernet and it was when it was installing one of the updates that it got an error, not a connection issue.

i have it drop out all the time when doing updates over wifi (router boots it off. router is a piece of junk. restarts itself every few hours). this time i had it connected via ethernet and it was when it was installing one of the updates that it got an error, not a connection issue.

New Dlink router with Wi-Fi less than 100 bucks!!! win. i had to replace mine recently due to a lightning strike (which also fried the Network plug in my Comp :( )

New Dlink router with Wi-Fi less than 100 bucks!!! win. i had to replace mine recently due to a lightning strike (which also fried the Network plug in my Comp :( )

Coincidence! My router got fried by lightning strike last Friday night and then was pronounced dead on Monday.

On the plus side, Harvey Norman have 30% Cisco stuff at the moment so I grabbed an X3000 which is performing very nicely :)

  • 9 months later...

I know the new Vette is now available on a DLC pack, if that's your thing

I'm keen on finally getting the Spa circuit, and adding the Aventador would be good

But need to do my first ever system upgrade on the PS3 in nearly 3 years beforehand... as soon as my data allowance rolls over for the month, lulz

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Just had this happen to me too.  R32 GTR.   Also broke "just before going out onto the track" - someone up there is looking out for us... Very scary since I was about to do a narrow street course with zero run-off and curbs everywhere. Many people on here upgrading to billet uprights and R35 bearings?   Or buying new OEM knuckles?  I am not keen to replace with another s/h 30 year old fatigued part.
    • Top off with distilled water and see what happens. If you keep losing coolant then you know to start looking.
    • Nope.    Grab a varex and turn it down as you get close to home, win win? 
    • So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
×
×
  • Create New...