Jump to content
SAU Community

Recommended Posts

from the corner weighting of mine and others the drivers side is heavier than the passenger side. i would say that the adjustments made to even the front out has offset the rear. unless you have adjustable sway bar links. (rose joint style) than any change in ride height or spring pre-load afects the car somewhere elce.

did you do the adjusting Woo

Yes I adjusted it. But I have all standard links etc, the corner weights are only adjusted via the coil overs.

All 32's are simply heavier on the driver's side, come to think of it, so is Berry's 34, but by a LOT more than this. (Obviously the 4WD driveline has a lot to do with that).

To my mind, it's more important to have equal weight on the front to minimise brake lockup.

Edited by Marlin

Your never going to know without sticking a camera in there. But one of the circuit r32's down here has a greddy oil pressure gauge, and the warning light alwyas comes on under brakes. The other R32 down here that is quicker doesn't have a gauge, and that ran a bearing at the v8 supercar round last year, it was suspected it was under brakes. But we really don't know

i have noticed on a couple of occasions mine has gotten low oil pressure under brakes and in some.one elses car i have noticed the warning light come on under brakes, never had an issue round corners.

See, there's ya problem!

Data logging, gauges, lights, oil coolers. Don't run them mate, outa sight, outa mind :P

(only half joking) :D

I'm with you, I have a boost gauge and that is it :)

Everything else is going to tell me my motor is going to be f**ked, I'd rather be told by the motor itself haha

I've had 3 engines in my car...

The first let go with all gauges connected.

The second let go on it's first venture with all gauges connected

The third lasted a lot longer then the other two, purely because I only had the tacho and boost gauge connected... Reconnected oil pressure and the motor shit itelf 6 hours later...

Fourth motor is going in at the moment...

Edit: Oh, and LOVE those pics!!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
    • When you pulled it off, there is no signs of blown head gasket? Is it possible you have some other issues going on? Possible cracked blocked? Or do you think it's straight up lifting the head? Did you check what the head was torqued to before pulling it down (To see if possibly they're stretching, or starting to break threads out etc)?
    • Seems like a decent result for a modded JZX110. They are bulky in comparison to the 100 and 90 models (which I'd prefer myself) but they are getting very few and far between here in JP these days. Thanks for the detailed review and the import process into the UK. I also have a car which I'm hoping to export from Japan at some stage so it's good to know if someone from the UK was interested in it. By the way the corrosion underneath is par for the course for cars which were located in/near the mountains or along the Japan sea coastline. They get huge amounts of snow every winter and the sodium chloride is used on the roads. Many cars have some kind of rubber like treatment underneath but they tend to limit it to the wheel arches underbody and fuel tank. Suspension arms and sub-frames will have similar corrosion to your JZX110 which is a common sight. See it all the time and car dealers here generally don't even mention it unless asked.
    • If the sound goes away when you clutch in, the 1.5/2 way diffs are just shit, and you are a normal person. The diff is likely "fine" but driving at anything under 30kmh is a violent horrible experience. It would be exaggerated with solid diff bushings and subframe bushings if you have those.
×
×
  • Create New...