Jump to content
SAU Community

Recommended Posts

  • 9 months later...
  • Replies 48
  • Created
  • Last Reply

Top Posters In This Topic

Its getting really bad...i live in Mill park..northern melbourne and iv been pulled over 7 times these last 6 months. I was definitly not doing anything stupid. Every time i had my engine checked, tires checked and 2 times was sent to EPA to test my exhaust. Its just stupid..

Won't bother arguing bout how dodgy cops are but most r good and reasonable even with standard cars but in the end u have bought the gtr for the love of it, like I bought my gtst and gtt cos I always wanted a skyline. Just enjoy it while u have it mate, if the cops decide to act like cocks then that's nothing u can help. No one really appreciates fully sick kents who rip skids n make the rest of us look bad

Its getting really bad...i live in Mill park..northern melbourne and iv been pulled over 7 times these last 6 months. I was definitly not doing anything stupid. Every time i had my engine checked, tires checked and 2 times was sent to EPA to test my exhaust. Its just stupid..

Serious? Surely not in the northern subs... You may have something very obvious on your car that warrants them to take a look.

or the car you are driving has some sort of "history" with the cops. :)

Cops in the northern subs generally don't care unless you seem to be driving erratically or driving in a suspicious manner. Cause they actually go out and fight the "real crime" and accidents as a priority - due to resources being stretched.

I imagine defecting someone is lower in their list.

As opposed to the east and south east where the crime rate is generally lower - so "possibly" more reasources are focused on the roads.

I've lived in different parts of northern subs for the past 22 years.

But since you are from Mill Park - they could be ramping up cause of the guy that decided to wrap himself and some friends around a tree back in January...

By the way I find the cops in the northern subs pretty tough (really lay down the law) but easy going and don't mind a friendly chat - I guess they have seen way too much - that nothing really shakes their world anymore. If only more cops were like this... but that's probably for another thread - and would be open to debate :cool:

Pft you can have illegal mods. Just make sure they don't find them :D my car looks 100% stock under the bonnet. So I don't care that they pull me over with my skittles paintjob because I never get defected haha

wow... now that's confidence...

your car is too loud for starters.... then there's the matter of the aftermarket turbo... your injectors are the wrong colour (epa guys can spot this)

from memory you have a hole cut for your fmic....

you could be reeeeeeemed

(but your car is DEFINATELY not too low) :D

After I get this EPA cleared I'll be taking Boronia Road from now on. f**k Burwood Highway and f**k the gauntlet. Most police I come across are nice and most cop cars don't give me more than a glance, but there's something about Knox TMU...

After I get this EPA cleared I'll be taking Boronia Road from now on. f**k Burwood Highway and f**k the gauntlet. Most police I come across are nice and most cop cars don't give me more than a glance, but there's something about Knox TMU...

That's what I'm saying man, it's the area. Saying "oh you wont get pulled over looking stock" is just plain BS. It's a matter of time, unless you're out west or north. Come live out east and you'll see what I'm talking about. You'll be f**ked in the ass, I guarantee.

In saying that you can mod legally but really, what are your options? FMIC or POD, No ECU, no boost, no turbo change....whoopy do!

I had my kicker panel pulled off to check my ECU by the TMU, they are THAT thorough!! I'd swapped the PFC plate for the stock Nissan cover plate luckily.

Yeap but just shows how useless cops are. I just don't go to Knox and I'm fine. Cops never questioned injectors or even knew it had a larger turbo. They really can't find shit lol

The cops r probs reading this lol...Now they know the bright orange Skyline is illegally modified.... :)

The answer is simply if you can accept the fact when mod it you will get done eventually every now and then and if your prepared to deal with it rather then bitch about it then go ahead, me personally I like the mods I do and yes I hate getting done but to me driving my car with mods and enjoying it outweighs the price of getting done every now and then I just think of it as a extra tax for driving a skyline.

After I get this EPA cleared I'll be taking Boronia Road from now on. f**k Burwood Highway and f**k the gauntlet. Most police I come across are nice and most cop cars don't give me more than a glance, but there's something about Knox TMU...

I use burwood highway all the time, no dramas at all, but i've only had the supra for what, 1.5 months?

Which sections should i avoid?

I find stud road just as bad around the knox area, even my dad noticed he got a new Pajero from High street road / stud road corner and when he was checking up on the progress / paying stuff off, 3/4 of the times he was there he saw a commodore pulled over, soarer, and a skyline, just at the bus lane there..

Also thats where i got done once as well, even in my full hecktik non turbo bro.. they don't care apparently my P wasn't up even though it was.. just wrote a letter saying WTF? and got out of it. Driving normal too.

I use burwood highway all the time, no dramas at all, but i've only had the supra for what, 1.5 months?

Which sections should i avoid?

The whole of Knox man, but specifically the gauntlet (that section of traffic lights that 99% of the time you have to stop somewhere outside of Knox). I used to drive through there all the time with my Soarer, never got attention. And in a year of driving the R33, no worries either bar a couple of relatively unfair traffic infringements. But they will eventually get you on the defect. I drive through there at the moment but that's because I know I can thrust the defect/EPA notice in a cops face and say too late your colleague beat you to it f***face. Once the EPA is cleared I'll be avoiding at all costs.

High Street Rd, Stud Rd, Scoresby Rd, Ferntree Gully Rd...STAY AWAY!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...