Jump to content
SAU Community

R32 N1 Gtr Rh8/rh9 Drag Car


Nur33

Recommended Posts

Amazing work Ben, builds like this inspire me. Quick question, it appears you have a gloss finsh on the dash with the carbon fibre and a dry finsh with the centre console ( may just be the lighting ) Is there any tips to get the dry finsh ?

Cheers,

The pic must have been taken before we put the resin on it when it was sanded back, all of our carbon parts have had a clear coat of resin on them, not really sure how you would make it look like dry carbon.

Link to comment
Share on other sites

Hi Guys,

Started the car today and had a few issues but eventually fired up. The Bloody Crank angle sensor shit itself so lucky mark had his old one from his GTR. Also had a Voltage drop on our injector supply and was only getting 9volts instead of 11.5volts and would not fire the injectors. Once the car was started we shut it down fairly quickly cause the V band clamp behind the turbo was leaking and we will buy a new clamp in the morning and chuck the car on the dyno. Here is a video enjoy!

Link to comment
Share on other sites

are you going to put more boost into it?

also how did you run the motor in if its just been finished and put together?

i know with my motor they wanted me to do 2000 kms before having the full tune completed

Link to comment
Share on other sites

Sorry guys had a miss print the end result for today was 800Hp at all 4 wheels @ 26-27psi @ 9000 rpm which approx 1000 flywheel hp, dyno sheet and videos will be put up as soon as i get home got a 12hr drive now yucky.gif, we ran the motor in on the dyno for about 50km on 98ron fuel than upped her.

Link to comment
Share on other sites

50kms is enough time for everything to bed together?

Also from what I've read and been told by my own engine builder, you shouldnt run motors in on a dyno.

Not saying you dont know what your doing just going by my own experience.

Link to comment
Share on other sites

Depending on what type of rings you use, this is a drag engine build for one purpose its a lot different to your everyday streeter engine. Heres a pic of dyno graph:

196154_10150125899808485_679318484_6520717_1795736_n.jpg

Link to comment
Share on other sites

50kms is enough time for everything to bed together?

Also from what I've read and been told by my own engine builder, you shouldnt run motors in on a dyno.

Not saying you dont know what your doing just going by my own experience.

There are a number of shops who do 50k's or so after a quick drive around the block to make sure of no leaks, then turn it up and give it back to the owner at full power :)

Mine was done like that, installed and started, check for leaks, 100k's of run in then booked for the dyno

Link to comment
Share on other sites

yeah 2,000kms to run in before power tune is a waste of about 1,800kms in my opinion. but given I didn't build your engine you did the right thing in taking their advice.

also I dunno what's wrong with running in the engine on the dyno? it's fantastic. you don't have to go anywere, you can vary load and speed as you like. no time spent at red lights etc idling. no time spent on long constant speed and rpm sections of road, can run up to whatever speed you like, and since you are not driving you can keep a much better eye on the car temps etc. it's the best way to run it in in my opinion. but would get a bit expensive if you wanted to do 2,000kms of it!

Link to comment
Share on other sites

well i was just going by what croydon told me to do,

they build heaps of motors and know there shit so i took there advice.

but yeh i guess everyone is different as to how they do things

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • My whp was 418whp and 518hp crank on 98 octane fuel. So decent numbers. 
    • Found a issue, after driving through torrential rain, the drivers side roof drain is blocked and some water ended up in the boot I've parked it up, stripped out the boot, and dried it out with a towel Initial fix was poking a big long cable tie down the drain to unblock it, then poured some hot water and detergent into it to flush out what I could, which now has it working, but I'm assuming it needs a good old fashioned proper "rogering" of the drain holes    Next step is waiting for the trombone cleaner that I just ordered from FleaBay next week Luckily nothing made it into the interior and it is all drying out nicely and the roof drains are working well enough for now I found the same issue with my old NB when I first got that, a couple of broken down leaves and some dirt was enough to block the drains, I did have a trombone cleaner back then, but I cannot find it anywhere, although, going of other times when I buy something to replace something I cannot find, the old one will probably turn up any minute now
    • Will look into the helical front diff thanks.  Sounds like everyone just says keep the rear as is. 👍🏻
    • R33 NA comes as rb25de or rb20e, so either of those, or r34 rb20de
    • I think the figures are pretty accurate as all my other cars are around the right hp readings as have done on multiple dynoes. However they are rwd cars so might mean the difference.    I am running every possible hks part also and a str exhaust … all new ecu. The mod list is endless. 😂 I’m ready for stroker and big turbo if I go that route. 
×
×
  • Create New...