Jump to content
SAU Community

Recommended Posts

Hi All,

As you may or may not be aware ANDRA have banned E85 as Fuel acceptable for drag racing.

100% Ethanol is currently allowed and E85 is availalbe to the general public at the bowser.

ANDRA have claimed that the mixture is to hard to measure but this is not true as the V8supercars use it as there control fuel. E85 is a step forward for this country.

It is better for the environment and is produced from renewable waste. Stop ANDRA holding Australia back!

Clicky --> http://www.gopetition.com.au/online/32119.html

I urge you all to sign the petition. You never know when this might end up affecting you.

If you don't think it will ever affect you then sign anyway and help out the environment and motorsport in one hit !

...

Edited by Butters
Link to comment
https://www.sau.com.au/forums/topic/297902-andra-vs-e85-sign-the-petition/
Share on other sites

  • Replies 105
  • Created
  • Last Reply

Top Posters In This Topic

done #65

i can see a very big push from racefuel suppliers to have ANDRA ban E85...they put a lot of money into the sport and will stand to loose a big market share if E85 goes onto the approved fuels list.

Got nothing to do with fuel analisis...its all about money.

Hey i signed, but i can't actually see where it says that e85 is banned on the web page

http://www.andra.com.au/subpage.asp?Page=A...uels&Menu=9

It says at the bottom,

Any fuel produced by an oil company that is available to the general public through a retail petrol station bowser in at least three ANDRA divisions.

Can anyone interpret?? does that mean the fuel can be used??

Dirt, i believe you about the price thing though. Why would you (for the average racer) go out and spend $4-5+/L for a pretty good blend of rocket fuel. Saves tying to measure out ratios of toluene, just roll up to a servo and fill up!!

Yes you are correct that is what is says.

I also read by that wording that E85 was allowed.

But the fuel tech for ANDRA is very clear that it is not allowed.

They believe it is not available at "enough" bowsers to quailify.

done #65

i can see a very big push from racefuel suppliers to have ANDRA ban E85...they put a lot of money into the sport and will stand to loose a big market share if E85 goes onto the approved fuels list.

Got nothing to do with fuel analisis...its all about money.

Exactly the guys that support the drag racing scene in general make a fair chuck of their money from race fuel sales.

The issue i see is without the fuel sales the sport and andra may lose some backers which would be worse for the sport than a ban on E85... but then more guys running E85 means they could race more which means more income.....

Edited by URAS
Hey i signed, but i can't actually see where it says that e85 is banned on the web page

http://www.andra.com.au/subpage.asp?Page=A...uels&Menu=9

It says at the bottom,

Any fuel produced by an oil company that is available to the general public through a retail petrol station bowser in at least three ANDRA divisions.

Can anyone interpret?? does that mean the fuel can be used??

First hurdle.....is E85 produced by an "oil company"?

Or is it produced by CSR, which I am not sure is an "oil company" and distributed through retail petrol stations, albeit in a limited form.

Next hurdle, if the above one is passed, is to find out whether it is available to the general public through the bowser in at least three ANDRA divisions.

I also note this statement on the ANDRA website:

Any Methanol or Ethanol that has no performance enhancing additives

Does this mean E100 would qualify as it is pure Ethanol and not blended with any "performance enhancing additives"? What is a performance enhancing additive? Is the other 15% of E85 i.e. unleaded pump fuel, considered to be a performance enhancing additive?

I don't know the answer to these questions - I'm just reading and taking a literal interpretation of the stated ANDRA policy.

Edited by juggernaut1
First hurdle.....is E85 produced by an "oil company"?

Or is it produced by CSR, which I am not sure is an "oil company" and distributed through retail petrol stations, albeit in a limited form.

Next hurdle, if the above one is passed, is to find out whether it is available to the general public through the bowser in at least three ANDRA divisions.

I also note this statement on the ANDRA website:

Any Methanol or Ethanol that has no performance enhancing additives

Does this mean E100 would qualify as it is pure Ethanol and not blended with any "performance enhancing additives"? What is a performance enhancing additive? Is the other 15% of E85 i.e. unleaded pump fuel, considered to be a performance enhancing additive?

I don't know the answer to these questions - I'm just reading and taking a literal interpretation of the stated ANDRA policy.

The E85 i was planning to run is produced by CSR and is the control fuel for the V8 Supercars. I obtain it direct from AVESCO Fuel Control so its the real deal and in my opinion the best and most consistent E85 fuel you can get your hands on. Ive just spent big bucks upgrading the fuel system to run this in the car (2000hp fuel pump, fuel cell, aeromotive reg., Hypertune rail, 1600cc injectors and over $1000 worth of -10 and -8 lines and fittings) and now its all a waste of time. Might just have to run 2000cc injectors and use straight Methanol.

The VP Roo16 i previously ran was $13.50 a litre!!! I buy the control fuel E85 for $400 per 200 litre drum delivered. i was trying to save on running costs to try and make racing a bit more economic for me but all this excercise has done is cost me more money. >_<

Edited by DiRTgarage
The E85 i was planning to run is produced by CSR and is the control fuel for the V8 Supercars. I obtain it direct from AVESCO Fuel Control so its the real deal and in my opinion the best and most consistent E85 fuel you can get your hands on. Ive just spent big bucks upgrading the fuel system to run this in the car (2000hp fuel pump, fuel cell, aeromotive reg., Hypertune rail, 1600cc injectors and over $1000 worth of -10 and -8 lines and fittings) and now its all a waste of time. Might just have to run 2000cc injectors and use straight Methanol.

The VP Roo16 i previously ran was $13.50 a litre!!! I buy the control fuel E85 for $400 per 200 litre drum delivered. i was trying to save on running costs to try and make racing a bit more economic for me but all this excercise has done is cost me more money. :D

I think people are getting riled up over nothing, just run methanol - the fuel is cheap and makes good power what more is there to say

I think people are getting riled up over nothing, just run methanol - the fuel is cheap and makes good power what more is there to say

I think the reason people are getting all riled up, is because the fuel is cheap, fairly easibly accesible(bowsers) and has great performance possibilities without the need to drain the fuel system after every night of racing. Plus people can use drive their car to from the strip and still use the same settings.

Although for the majority of us, ANDRA's not goign to check the fuel in our tank before we go for a run on a Wed night or probably even at a Jambo or sport compact event. Mainly for those bracket meets and what not.

Yah dirt, feel sorry for ya for the setup. Kinda sucks setting up only having to change the system again, although no doubt the system would be fairly similar.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Initially I thought having a pair of Recaro seats would be a big bonus, it turns out these do get a little uncomfortable on long journeys (my fault, not the seat). I had a look through the GSM Performance website at reclining seats and booked an appointment to visit their show room. I got the Recaro Sportster CS for the R34 from here, was very happy with the service received so of course a re-visit was in order. Unfortunately the two Corbeau seats I had chosen aren't on display but they had 4 other options available. Two seats dug into my back, one dug into my legs and the other was perfect. I also found out that Recaro seats use a larger bolt pattern so some adaption was required. Luckily GSM offer some universal adaptors that should solve this problem. I searched the interwebs for price comparisons and Corbeau themselves were the cheapest at £300 cheaper (for the pair). I asked GSM if they could price match, unfortunately they couldn't. I later received an email saying Corbeau would honour them the same discount, but the purchase was already made. I did however order the brackets from GSM, both arrived on the same day. I started with the passenger side seat, knowing this was going to be a little trial and error. There are 3 mounting holes at the front and 2 at the rear on these JURAN Racing seat rails.  With the adaptor brackets mounted, the allen cap bolts started to push into the seat, NOT GOOD!  The rear mounting holes lined up but there were issues at the front. The holes were 1/2 hole out, so the brackets got a tickle with the drill to modify the holes. The supplied bolts weren't going to be long enough and a spacer was needed to stop the adaptor bars from bending. A local fasteners company supplied be with some nylon spacers and longer bolts (M8x30, although these will be replaced with 35mm long shortly) A before and after I pre-drilled the front bracket before making a start on the driver's seat to save some time. And in no time at all that was in the car too. The all black seats have transformed the interior and these are MUCH more comfortable. The only downside with the new Corbeau seats is I sit a little higher, but I'll happily accept that over discomfort. The Youtube video can be found here: https://www.youtube.com/watch?v=wPyttKPktXA
    • All 3 I guess. The car came with the JASI Aero 4 door Type R Full Kit unpainted so this was one thing at the top of my list to complete then I noticed there were body panels parts for this kit so i picked them up along with some black mesh to fill in the front bumper and front side air vents. car is at a paint and body shop atm completing this work. Next I will be addressing the internal bells and whistles, great summer project I can do with the kids.  full interior removal - ,boys car sound deadening - pads and spray ,boys stereo, sound, lighting - Big 3, GTT or bigger alternator ,kids head lining - dye black add star lighting mod ,daughter. That's it for the next 5-6 months. I have some motor maintenance  work i have to plan out. oil filter relocation, gaskets, mounts. beyond that, mind is starting to turn over if i can use a DET intake plenum, block off turbo ports & pipe in a air intake.      
    • roller coaster of a ride. Alarm system was removed & main harness was repaired where possible. still no fix just random successful starts. moved on to the replacing the ignition switch and relay. well all this troubleshooting & repair has been going on, the car is at a paint and body shop being pushed around. Ive been going down there on odd days after work to get it sorted.     
    • 5th November if you want to come out for a spin wakfield
    • PROBLEM WAS BROKEN COOLANT SENSOR!!! Replaced with a new one and its running mint.
×
×
  • Create New...