Jump to content
SAU Community

Recommended Posts

  • Replies 304
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Name on list-check

Stock rims-check

newish tyres-check

twitchy left foot with a heavy right one-double check

Im so looking forward to this, gonna make some skids.

Ha ha ha, sounds like me Mark... Also looking to add your old diff centre in a "locked" manner to my car...

Locked diffs,,,whats going on here. Are we getting serious boys???. I thought this was a fun day out,,,seems not.

It's all okay,,,I'm running the 1st Ladies car and it's got a mad locker as well. :D

I was hoping Mrs Handley would have a steer of our car,,,but unfortunately Kelly is off doing some rubbish tarmac raily stuff. Go figure.

Do me proud girl!!!!. :)

Neil.

lol didn't take her long to decide between Texi and Targa Westpoint. Considering she was going to pay you back for thrashing the z at Oran Park I think she's made the wrong choice

entries are looking good at the moment - if you are thinking about entering don't delay because it will probably fill up!

Yes :)

people share cars all the time. He has to pay another entry fee though, and just put your car down as the vehicle. The car will be marked with 2 numbers and will do twice as many runs as other cars there...

alot of people do it actually!

ok cool.

hes already paid an on the list. I need to pay now then, no point letting him have all the fun in my car :P

From what i gather from the attached files, I can buy the required license on the day for $50?

Am I able to pay for club membership and a cams license on the day instead and still be included?

Yes you can, but that means you won't be paying the members entry price :P

I suggest you pay for entry and membership NOW and pay for the license on the day... this frees up a bit of time for us and you to get sign on in the morning done quickly...

go onto the cams website and fill out the form, if not google L2S cams licence and it has a link to the file needed. Fill it out and send it off with the money and they will send u the licence and everything u need..

I did mine in december and got it back within a week..

Locked diffs,,,whats going on here. Are we getting serious boys???. I thought this was a fun day out,,,seems not.

It's all okay,,,I'm running the 1st Ladies car and it's got a mad locker as well. :rofl:

I was hoping Mrs Handley would have a steer of our car,,,but unfortunately Kelly is off doing some rubbish tarmac raily stuff. Go figure.

Do me proud girl!!!!. :)

Neil.

Locked diffs... Well, I just want real skids, for real fun... And to know when it starts to go around... And I choose to stay on it, it's going to keep going around not decide to open up and change directions... LOL




  • Similar Content

  • Latest Posts

    • Power is fed to the ECU when the ignition switch is switched to IGN, at terminal 58. That same wire also connects to the ECCS relay to provide both the coil power and the contact side. When the ECU sees power at 58 it switches 16 to earth, which pulls the ECCS relay on, which feeds main power into the ECU and also to a bunch of other things. None of this is directly involved in the fuel pump - it just has to happen first. The ECU will pull terminal 18 to earth when it wants the fuel pump to run. This allows the fuel pump relay to pull in, which switches power on into the rest of the fuel pump control equipment. The fuel pump control regulator is controlled from terminal 104 on the ECU and is switched high or low depending on whether the ECU thinks the pump needs to run high or low. (I don't know which way around that is, and it really doesn't matter right now). The fuel pump control reg is really just a resistor that controls how the power through the pump goes to earth. Either straight to earth, or via the resistor. This part doesn't matter much to us today. The power to the fuel pump relay comes from one of the switched wires from the IGN switch and fusebox that is not shown off to the left of this page. That power runs the fuel pump relay coil and a number of other engine peripherals. Those peripherals don't really matter. All that matters is that there should be power available at the relay when the key is in the right position. At least - I think it's switched. If it's not switched, then power will be there all the time. Either way, if you don't have power there when you need it (ie, key on) then it won't work. The input-output switching side of the relay gains its power from a line similar (but not the same as) the one that feeds the ECU. SO I presume that is switched. Again, if there is not power there when you need it, then you have to look upstream. And... the upshot of all that? There is no "ground" at the fuel pump relay. Where you say: and say that pin 1 Black/Pink is ground, that is not true. The ECU trigger is AF73, is black/pink, and is the "ground". When the ECU says it is. The Blue/White wire is the "constant" 12V to power the relay's coil. And when I say "constant", I mean it may well only be on when the key is on. As I said above. So, when the ECU says not to be running the pump (which is any time after about 3s of switching on, with no crank signal or engine speed yet), then you should see 12V at both 1 and 2. Because the 12V will be all the way up to the ECU terminal 18, waiting to be switched to ground. When the ECU switches the fuel pump on, then AF73 should go to ~0V, having been switched to ground and the voltage drop now occurring over the relay coil. 3 & 5 are easy. 5 is the other "constant" 12V, that may or may not be constant but will very much want to be there when the key is on. Same as above. 3 goes to the pump. There should never be 12V visible at 3 unless the relay is pulled in. As to where the immobiliser might have been spliced into all this.... It will either have to be on wire AF70 or AF71, whichever is most accessible near the alarm. Given that all those wires run from the engine bay fusebox or the ECU, via the driver's area to the rear of the car, it could really be either. AF70 will be the same colour from the appropriate fuse all the way to the pump. If it has been cut and is dangling, you should be able to see that  in that area somewhere. Same with AF71.   You really should be able to force the pump to run. Just jump 12V onto AF72 and it should go. That will prove that the pump itself is willing to go along with you when you sort out the upstream. You really should be able to force the fuel pump relay on. Just short AF73 to earth when the key is on. If the pump runs, then the relay is fine, and all the power up to both inputs on the relay is fine. If it doesn't run (and given that you checked the relay itself actually works) then one or both of AF70 and AF71 are not bringing power to the game.
    • @PranK can you elaborate further on the Colorlock Dye? The website has a lot of options. I'm sure you've done all the research. I have old genuine leather seats that I have bought various refurbing creams and such, but never a dye. Any info on how long it lasts? Does it wash out? Is it a hassle? What product do I actually need? Am I just buying this kit and following the steps the page advises or something else? https://www.colourlockaustralia.com.au/colourlock-leather-repair-kit-dye.html
    • These going to fit over the big brakes? I'd be reeeeeeeeaaaall hesitant to believe so.
    • The leather work properly stunned me. Again, I am thankful that the leather was in such good condition. I'm not sure what the indent is at the top of the passenger seat. Like somebody was sitting in it with a golf ball between their shoulders. The wheels are more grey than silver now and missing a lot of gloss.  Here's one with nice silver wheels.
    • It's amazing how well the works on the leather seats. Looks mint. Looking forward to see how you go with the wheels. They do suit the car! Gutter rash is easy to fix, but I'm curious about getting the colour done.
×
×
  • Create New...