Jump to content
SAU Community

Recommended Posts

Guys,

After being excited about my new turbo purchase...i am quite disappointed.

Would appreciate any advise.

In short, This is what i purchased as advertised. (from a supplier who ordered from another supplier i believe)

Garrett GT3071R RB25DET T3 Bolt-on Turbocharger 500hp, Dual Ball Bearing Kit - 0.82a/r

Horsepower: 500hp

Compressor Housing A/R -: 0.60a/r

Compressor Inlet -: 4"

Turbine Housing A/R -: 0.82a/r

Turbine Hsg. Attachments: Inlet: Standard 4-bolt T3 flange

Turbine Hsg. Attachments: Outlet: Nissan 6-Bolt

Oil Inlet - : Inverted Flare 7/16-24 thread

Oil Drain - : Standard 2-bolt T3 flange

Bearing Type: Dual Ball Bearing

Cooling: Water Cooled Centre

Wastegate: Integrated Wastegate

Includes:

1x Garrett GT3071R RB25DET Turbocharger, complete High Nickel Content Cast Iron Nissan Style Turbine Housing with Internal Wastegate and actuator.

Fitting Kit Includes: Oil Drain, Oil Lines, Water Lines, Turbo Gaskets, Spacer, Studs, Nuts.

Turbo was delivered direct to my tuner, who had spent approx 9 hours labor to install, and needed to purchase the following.

4x studs - apparently the ones provided were not long enough or universal instead of metric.

10m spacer as it was not included.

An earls adaptor for the water or oil line i believe. (Lines were provided with the kit)

2x turbo hoses and clamps

also something about re-aligning the compressor housing??? i think. did mention he is surprised they were not using jigs

Picked up my car today after not having it for 8 days or so.

car is making 243kw@tw on 14psi

I looked at the new turbo, and can see the following.

compressor housing .50 A/R

garret ID tag: GT2835 - 700382-003

researching the above, it is the cropped version?

So all up, i have paid for a product i was not delivered with, and spent many extra $ to make it bolt on.

PS. my tuner was not aware of the turbo being delivered, he only knew one was turning up and needed to be installed.

Anyone else had an experience like this and what have you done about it? or, what would you do in this case?

Link to comment
https://www.sau.com.au/forums/topic/301930-my-turboa-good-thing-or-a-bad-thing/
Share on other sites

Hopefully it isnt the cropped version.The results seem good for the boost being run. IMO there is no advantage having the 4" intake as opposed to the 2.75". Pretty much all the other bits needed are common knowledge for fitment. How much was it?

Hopefully it isnt the cropped version.The results seem good for the boost being run. IMO there is no advantage having the 4" intake as opposed to the 2.75". Pretty much all the other bits needed are common knowledge for fitment. How much was it?

def think its cropped from what i read.

$2460

thanks for the replies guys.

the numbers are confusing the hell out of me.

I am just concerned that i have not been provided with what i ordered/paid for.

so, my turbo is a .50 compressor, turbine 700382-003. and looking at the rear it has "sonic" written on it.

looking at the sonicperformance site, they state they have a .64 turbine housing.

and on the site from which i ordered it, the specs below differ.

Compressor Housing A/R -: 0.60a/r

Compressor Inlet -: 4"

Turbine Housing A/R -: 0.82a/r

Turbine Hsg. Attachments: Inlet: Standard 4-bolt T3 flange

Turbine Hsg. Attachments: Outlet: Nissan 6-Bolt

Oil Inlet - : Inverted Flare 7/16-24 thread

Oil Drain - : Standard 2-bolt T3 flange

Bearing Type: Dual Ball Bearing

Cooling: Water Cooled Centre

Wastegate: Integrated Wastegate

The GT3071 - 20 is the same as a HKS 2835

so you got the turbo you ordered. The power is good for that booet on that turbo IMO

What exactly are you not happy about?

he is not happy about the following...

he added Red Bull to his skyline...cost...$3.50...result...supersonic multi million dollar jet fighter.

he then tried a different turbo...cost...$2460...result...243RWKW to remove the skin off his custard.

Id be pissed too!!

Moral to the story...drink Red Bull and dont eat custard!

Gt3071 is basically the same as the hks spec Gt2835 so going by the id no. it seems to be right.

The rear however will be cropped to fit the Nissan style flange and its highly unlikely it would be a .82

The comp housing it supposed to be .50 a/r as well for the Gt3071, the Gt3076 however comes with the .60 a/r comp

That power looks good for 14psi tho....20psi should get u up to 270ish

Gt3071 is basically the same as the hks spec Gt2835 so going by the id no. it seems to be right.

The rear however will be cropped to fit the Nissan style flange and its highly unlikely it would be a .82

The comp housing it supposed to be .50 a/r as well for the Gt3071, the Gt3076 however comes with the .60 a/r comp

That power looks good for 14psi tho....20psi should get u up to 270ish

They don't crop the turbine to fit the housing. They machine the housing to suit the turbo.

It will be all the same specs as the 3071-3 that the ID tag says. The turbine housing A/R is 0.73.

$2460 is spot on the money considering it didn't come with spacer, studs or silicon.

Who did you buy it from?

thanks for the replies guys.

the numbers are confusing the hell out of me.

I am just concerned that i have not been provided with what i ordered/paid for.

so, my turbo is a .50 compressor, turbine 700382-003. and looking at the rear it has "sonic" written on it.

looking at the sonicperformance site, they state they have a .64 turbine housing.

and on the site from which i ordered it, the specs below differ.

Compressor Housing A/R -: 0.60a/r

Compressor Inlet -: 4"

Turbine Housing A/R -: 0.82a/r

Turbine Hsg. Attachments: Inlet: Standard 4-bolt T3 flange

Turbine Hsg. Attachments: Outlet: Nissan 6-Bolt

Oil Inlet - : Inverted Flare 7/16-24 thread

Oil Drain - : Standard 2-bolt T3 flange

Bearing Type: Dual Ball Bearing

Cooling: Water Cooled Centre

Wastegate: Integrated Wastegate

Keep in mind that the ID tag has nothing to do with housings. It only identifies the cartridge.

All the specs I said in the above posts are accurate. I sell these as a sonic dealer myself.

thanks again guys.

i am actually happy with the power and performance of the turbo...

below is the site

http://www.tweakit.net/shop/product_info.p...9ij7uter43vvdj6

didnt come with the silicone reducer etc... which i am fine with. but think it should at least state "misc parts may be required to fit"

spacer is listed, but wasnt supplied, cost me another $30 for part + delivery. then some labor to grind.

water line and oil line was supplied, but required an adapter for some reason, cost me an extra $30

studs were supplied, but didnt fit. cost me an extra $45

also required an elbow

and as mentioned, the tuner had to re-jig the alignment...or something like that.

so a few extra $ and hours in labor i had to fork out for.

would i be correct in saying that the site is incorrect? false advertisment

he is not happy about the following...

he added Red Bull to his skyline...cost...$3.50...result...supersonic multi million dollar jet fighter.

he then tried a different turbo...cost...$2460...result...243RWKW to remove the skin off his custard.

Id be pissed too!!

Moral to the story...drink Red Bull and dont eat custard!

paul, just because you cant use e85 in your car doesn't mean you have to drink the rest of your stock

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
×
×
  • Create New...