Jump to content
SAU Community

Recommended Posts

Hey guys, thought i might post up my new car! Its a 1997 GTR V-spec. I've had it for just over a month now. Bought it off another forum member in Sydney.

I've always loved skylines and wanted one for the last 10 years (a long long wait, been reading this forum/site since 2005). I originally looked at getting a R33 series 1 (many years ago), time passed then i thought a R33 S2, then i went overseas for 2 years came back and I thought R34 GT-T, so I started to look around and by accident I ended up test driving a R33 GTR. From then on I thought I have to get a GTR. It felt so much better in everyway. Power delivery, handling etc etc, and it felt special.

So anyway I finally found exactly what i wanted, a R33 S3 GTR in black with all the mods i wanted to do. So it has 18 inch GTCs, Garrett -5s, Power FC, Nismo - injectors, fuel pump, oil pump, water pump, fuel pressure regulator and sport clutch, apexi pods, exhaust, Greddy Boost controller and plenty of preventative maintanence work done, got dyno'd at 290rwkw by the previous owner. I'll probably keep it this way for a while, maybe take it to Racepace and see what they think. I know the -5s turbos can be wound up more than what they are on atm (0.9 bar low & 1.2 bar high) but the bottom end is stock so that is maybe the next thing i'll do. For now i'm more than happy with it and very happy to be finally driving around in a skyline!

Cheers.

Oh yeah sorry about the pic quality, iphone is no DSLR.

post-33011-1262871858_thumb.jpg

post-33011-1262872025_thumb.jpg

post-33011-1262872168_thumb.jpg

post-33011-1262872311_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/302944-my-new-carfinally/
Share on other sites

Thanks guys for all you comments! Yes one of the first things I thought when I saw the car was it needs to be lowered. The stock suspension sits pretty high. Might source out some king springs for the moment till I get the some funds for the coil overs. Another mod I'm thinking to do would be to make the exhaust from turbo back. At the moment it's only cat back and the stock exhaust rattles a bit at low revs, gets kinda annoying plus performace might benefit a bit. I haven't seen how a 6000k hid package looks. Might have to do a search for some pics.

There seemed to be a bit of interest with the car when it was up for sale, which is one of the reasons why I snapped it up soon after looking at it. Figured no point loosing the exact car I wanted by haggling over a grand or two. I'll post a few more pics up after I've cleaned it today.

Cheers.

Yep get a set of 6000k HID's off of Dave. One of the best mods i've ever done, makes night time driving fantastic and havn't ever had any dramas with them.

The picture doesn't do them justice (my old camera), but you get the idea.

post-35676-1263103127_thumb.jpg

Edited by PM-R33

congrats mate,

would have snapped this up instantly even though im qld, but i already have a r33 gtr hehe, i wish this was for sale back when i was in the market for mine ;)

keep it in once peice mate :) , and dont bother with springs, keep stock suspension until you have the money for coilovers, just live with the height for a while like i did :)

honestly springs on a GTR ruin it, coilovers or nothing :thumbsup:

Yep get a set of 6000k HID's off of Dave. One of the best mods i've ever done, makes night time driving fantastic and havn't ever had any dramas with them.

The picture doesn't do them justice (my old camera), but you get the idea.

post-35676-1263103127_thumb.jpg

Why would he bother with a HID kit when the car has factory Xenon's??

They are much brighter (and whiter) than the standard headlights fitted to GTST's and earlier model R33 GTR's.

I say don't waste the money and go for some lowered springs instead.

Oh, by the way, NICE CAR!!! :thumbsup:

Hey guys, here are some more photos I took this afternoon after a scrub and some other random ones i have taken since I've had it.

Yeap its already got factory Xenons, thought some of you were suggesting to change the Xenons to a different colour. I'll definately leave it i'm happy with it as is, might consider changing the high beam but i'm not too fussed for now. Suspension and turbo back exhaust & Racepace retune are the main priorities for now :thumbsup:

Anyway, thanks everyone for all the positive feedback!

post-33011-1263125871_thumb.jpg

post-33011-1263125888_thumb.jpg

post-33011-1263125905_thumb.jpg

post-33011-1263125924_thumb.jpg

post-33011-1263126062_thumb.jpg

post-33011-1263126111_thumb.jpg

post-33011-1263126132_thumb.jpg

post-33011-1263126148_thumb.jpg

post-33011-1263126161_thumb.jpg

post-33011-1263126176_thumb.jpg

post-33011-1263126195_thumb.jpg

Why would he bother with a HID kit when the car has factory Xenon's??

They are much brighter (and whiter) than the standard headlights fitted to GTST's and earlier model R33 GTR's.

I say don't waste the money and go for some lowered springs instead.

Oh, by the way, NICE CAR!!! :ermm:

I know they have factory HID's, but from the first pic it did still look pretty yellow. Judging from the new above pics it doesn't look that bad so maybe it was just the way the first pic turned out. What kelvin are the factory ones?

Edited by PM-R33

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok I FINALLY found a video lol. This took way longer than it should have as I could have sworn I saw multiple videos like this. I kept finding the completely opposite (the correct way of doing this). I wouldn't be surprised if I f**ked this up somehow.  I just realised where I've been getting confused and even with other things I work on. I haven't been doing things the regular way instead I'm going a roundabout way of doing things, like putting epoxy primer first then filler for example instead of putting just filler then primer on top of that, then wondering what happens if I get that primer on the clear coat that I haven't sanded yet. This was a bit of an epiphany 😂  But anyways, here this video. Time stamp, 2:56, some of the primer lands on the paint unscuffed above. You can see from the reflection it looks shiny.  
    • It does, this part circled in red. I assume the OEM bolt might not work well with the poly bushing because the dimensions may be different?
    • The J arm doesn't have bushes either. Assuming that by "J arm" you mean the part of the upright that runs down from the upper arm's outer bushes to the top of the hub. That has a kingpin style bearing in it. If you meant the lower control arm, it has 1 bush, at its inner end. If you have PU in there, that is superior to Nismo rubber. If you meant the caster/tension rod - it has 1x bush at the front end, and again PU is superior to Nismo rubber. But as I said above, I would definitely get the GKTech arms for that, as sphericals slay all other options there.
    • Yep I'll find those and get back to you. To be honest I wasn't aware of data sheets until you mentioned it. I'm still new to this haha, lots to learn. My car is parked outside, it rusted in less than 24 hours lol. Only minor surface rust that was easily removed but I've been worried that it might rust from the inside out and screw me over in the long term (if I decide to keep the shitbox for that long).
    • Sorry I meant nismo bushes in the J arm, not the actual gktech upper camber control arm.
×
×
  • Create New...