Jump to content
SAU Community

Recommended Posts

  • Replies 246
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

I always use 5, I have used 4 in the past but never really liked it. What are your thoughts on the 4?

I will have some more pics up in a couple of days of the welding I done on the weekend....more of the cast to raw aluminium and it turned out quite well and consistent which is most important.

I always use 5, I have used 4 in the past but never really liked it. What are your thoughts on the 4?

I will have some more pics up in a couple of days of the welding I done on the weekend....more of the cast to raw aluminium and it turned out quite well and consistent which is most important.

i really only use 5356 which i have had no problems with it, but i havent tried pipe/cast or sheet/cast with it.

ive used 4043 before but thats only good for cast repair,

i might grab 1kg of 4047 and compare it to the 5 series

Silly question, would you know if the RB20, RB20 or Rb26 fuel rails are interchangeable? I have an RB26 rail for my RB20 and after having a quick look at it i suspect its not going to work....despite my mates assurance he ran a scummy RB20 rail on his RB26.

One other thing, is there a reason why the runners are perpindicular to the plenum when you are going full custom?

For some reason I believe they do but not 100% sure since I usually make my own. I would just see if anyone else can confirm, I think the rb25's are not.

This has been proven over and over to produce the best results in terms of flow and consistency between runners with a correctly designed plenum.

looks great! just curious, how you manage to get the torch into tight spots like this? do you pull the tungsten out a fair bit, and wind up the gas flow to shield it more? or any secrets? :D

i'm also thinking for tighter spots too, like between runners in an ex manifold, etc..

I use a 20 size torch....being watercooled it is a lot smaller than the air cooler ones.

I have very rarely needed to extended the tungsten out of the cup or turn the gas flow up when welding aluminium....I usually just crank the amps up. I do though for stainless/mild steel and tight spots.

They are sandblasted prior to welding. If they are not blasted and you try to weld them, the impurities should only come from the cast and not from the oil on the inside of the runners. If that's what's happening you are using to much amps.

I used to weld them before blasting them but as you can see the result is just fine doing it before and this justifies not having to blast them afterwards as well.

You could ask what type of sand I use to blast them, but then I would be giving away all my little secrets :P

Ariel

hahaha fair enough :D

well its either soda or glass bead - as no garnet/crushed glass/oxide based blasting media will give that shine :)

you've given me enough hints so i should work the rest out myself :D cheers Ariel.

Chris

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • You're not the first person that's said that about this car lol. A Touring wagon GT in Spark yellow mica would be the dog's danglies 😆 I will keep an eye out for a future purchase for sure. The seats are almost like the OEM Recaros... electric adjustment for fore/aft and tilt movements except reclining.   
    • Yes!! I love these! It's a shame its not the wagon though!   Thank everything that's holy that it doesn't have the interior of the Aussie delivered ones. Those seats are so much nicer.  
    • I'm both sorry and thankful that you do that. 
    • 2001 BE5D Subaru Legacy B4 RSK (3rd gen) EJ208 (pink injector) Twin Turbo 280PS 5-speed manual Full time 4WD "RSK" grade which means all of the above LQC option which means stock rear spoiler  I got it primarily to export to someone outside Japan who was interested. These BE5 Legacy B4 RSKs are going through a bit of a resurgence right know in Japan as they are one of the few cars from the "turbo, manual, RWD/4WD, 280hp gentleman's agreement era" cars that don't require stupid money to purchase. Which for some people might be a good opportunity to get as a base for restoration. If I can't find anyone to purchase it I will certainly be doing that myself over the long term. Why? Because it's properly fast in stock form, handles well enough for a GT sedan, there's still enough aftermarket and (if you can wait a while) genuine part support to make it a restoration candidate (<-- that will only get worse over time so it's a case of do it now or choose get a BL5 4th Gen). Mechanically it's fine, has only 89,200kms on the odometer. The problem with this car is that the body and exterior trims are weathered from at least the last 10 years being parked outdoors. I'm the 3rd owner, the first owner was the one that had it for 14 years and barely drove it, had a low-speed front impact (which didn't damage anything behind the radiator support) and got it fixed and sold it. The 2nd owner put most of the kms on it and parked it outside for the last 10 years, hence the door rubbers have seen better days but if you overlook those cosmetic details, it presents pretty nicely. There is some minor rust on the LH rear wheel arch which I'll have looked at too at some stage.  Also as you'd expect from a car this age, the clear top coat is gone, leaving a satin finish on the roof.  Mechanically it's fine (as you would expect from a car with less than 100K kms) but the steering does feel slightly vague around the centre position at higher speeds. So first on the list is to get the steering rack bushes looked at. There's also the Lock button on the remote which doesn't work, but the Open button does.... it means that the anti-theft system thinks it's always open? It seems like if you open the car and don't start the engine within 3 mins or so the anti-theft kicks in again without any beeps or signals. So if you got to start it after that, it won't. You have to push the open button again. That's how I understand it anyway. Just a small irritation but not a big problem to sort out. There's only one mod, the Wangan SPL muffler. Just a tad louder than stock. It's a really good mod for those who don't want to wake the neighbours but still want to hear a more prominent unequal length header EJ20 sound. Anyway I hope to get all those things done eventually, that is unless someone wanted to import it to their country from Japan (where I live). I'm open for negotiations as I really would like a Skyline... but this will definitely suffice in the meantime 🙂 *Disclaimer: This is how I picked it up from the dealer, minus the stuff on the back seat. I haven't cleaned the engine bay or done a thorough exterior clean, aside from spray painting the wipers. 
    • Wow, even with the Audi logo centre caps. I love OEM wheel mismatches. 
×
×
  • Create New...