Jump to content
SAU Community

Recommended Posts

nope. why would it?

all it does is recirculate excessive built up pressure when you close the throttle body to prevent compressor surge.

there is no perfomance gains to be had from having a given type of blow off valve or recirculation valve.

the aftermarket ones are usually ass and either make the car run like ass or make silly noises.

nope. why would it?

all it does is recirculate excessive built up pressure when you close the throttle body to prevent compressor surge.

there is no perfomance gains to be had from having a given type of blow off valve or recirculation valve.

the aftermarket ones are usually ass and either make the car run like ass or make silly noises.

OK cool i just thought the aftermarket ones release more pressure then the normal ones becasue they can be bigger which means they clear out more of the pressure built up

no the standard ones are fine, please do not change them, aftermarket bov's are pointless and no gain

i suggest doing some reading of the upgrade threads to avoid wasting $ on pointless changes / upgrades etc

^ No. Aftermarket ones seal on idle - which is BAD.

stock gtr ones are fully open at idle... wich is why they need to be plumbed back if using air flow meters.

i tryed two wanker hks ssq's, absolutly shit compared to stock. massive delay and nowhere near as much flow.

in a perfect world the bocv would have such a light spring that its just enough to seat the valve and hold no more than 3 or 4 pound. dont forget its the boost pressure acting on the opposite side of the valve that seals it not the spring tension.

so in reality a proper poppet style bov with a rubberised seat (stock gtr) can never leak boost. ever. so long as the bov has got the same boost acting on its diaphram as it got in the pipe it sits in.

Here's a handy one for a track car: If you run MAP-sensored load metering, you can get rid of the recirc' setup on OE GT-R and have them vent to atmosphere, and K&N happen to make some of those little 'breather filters' that have exactly the same ID circumference as the OD of the factory GT-R bov outlet ports :D (you'll need the filters so you don't suck crap into the engine while running in manifold vacuum)

Pro tip. Fully hektic PSSSCHTTTTTT!!!! noise, if you like that kinda thing...

im 99% sure if u run pods u can here the stock BOV alot louder. but hey.... i dont no cause i got stock BOV and a stock Airbox. i cant hear anything, every now and than when driving next to a concrete wall on the freeway or somthing other than that, my engine bay looks factory, and my car is quite as...... till i cut her loose that is... than Kaki regu starts making some noise. haha

Edited by Deano 1
having them leak @ idle/low RPM eliminates compressor surge when using larger turbos.

same as the factory piping. It was all designed that way for a reason.

Doesn't comp surge occur when the turbo is making positive pressure in which case the stock bov will be closed anyway?

For what its worth i had a greddy recirculating valve which was shut on idle on my 25 and had no probs with idle,stalling when stopping etc etc.

im 99% sure if u run pods u can here the stock BOV alot louder. but hey.... i dont no cause i got stock BOV and a stock Airbox. i cant hear anything, every now and than when driving next to a concrete wall on the freeway or somthing other than that, my engine bay looks factory, and my car is quite as...... till i cut her loose that is... than Kaki regu starts making some noise. haha

There's a sorta 'baffle' thing in the stock airbox that you can remove that will make the stock BOV much louder if you remove it - if you like that sort of thing.

R31Nismoid is correct. Most stock blowoff valves have a small bypass hole about 5mm in diameter to stop the low throttle surge, I have blocked mine thinking it would be ok but there is the odd flutter when on boost at low revs and throttle opening.

Stock GTR BOV can handle above 300kW's.

Aftermarket BOV's have no gain.

Only reason to change if you are running a ridiculously high amount of boost and the stock BOV cannot handle it any more.

Doesn't comp surge occur when the turbo is making positive pressure in which case the stock bov will be closed anyway?

For what its worth i had a greddy recirculating valve which was shut on idle on my 25 and had no probs with idle,stalling when stopping etc etc.

Comp surge can occur anywhere on a compressor's map.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Agreed, I've never seen a 260RS specific manual. As GTSBoy said it will mostly be stagea other than the engine loom https://www.hgeconsulting.com.au/stageaservicemanual.pdf
    • You'lll likely have to make do with R33 GTR for engine/tranny stuff, and Stagea for the body. I don't know that there's even been an actual diagram seen in the wild.
    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
×
×
  • Create New...