Jump to content
SAU Community

Recommended Posts

Hey guys,

Just joined up to SAU... been a Toyota man, will miss my soarer! But I've decided to bite the bullet and get me an M35 250t. It's Should be getting delivered sometime next week!

Anyhoo, after reading through the forums I've noticed there's a few trouble spots with the M35's. It seems like the compliance exhausts normally fitted are way to restrictive which causes the already overboosted ceramic turbos to crap out. So, should I be getting a new exhaust ASAP? How many other people have had turbo problems?

If there are any other preemptive things or trouble spots I should be checking out, could you guys please post them up?

Cheers

Link to comment
https://www.sau.com.au/forums/topic/307942-another-new-m35-owner/
Share on other sites

Welcome. You will forget about your V8 Soarer in no time :(

Yep, you will find a heap of info on these 'ere boards...

A fair few have had the turbo replaced, it is something that you can expect to do at some time (usually around the 100-120,000km mark).

Exhaust should be upgraded anyway on turbo car, but it depends on what exhaust is fitted.

Mine was an extreme example of a restrictive exhaust and I think it is the one your are referencing.

The stock, untouched front pipe is okay I suppose (bit small in diameter though), but you really would be better off getting a 3" turbo back exhaust as the dump pipe is massively restrictive.

There are a couple of guys that are concerned about their transmissions and one has been rebuilt (damage is suspected to be caused at compliance when Dextron III fluid was used - USE ONLY NISSAN MATIC J or compatible fluid).

I personally have no issue with my transmission and change the fluid once a year (originally used Matic J but am now using Nulon 100% Synthetic ATF which is compatible).

An external transmission cooler will help (Repco stock the PWR items for around $110).

Radiator can also be undersized depending on how you drive and where you are situated.

Not really much else to be overly concerned with (off the top of my forgetful head).... just remember to post pics of your new M :D

Edited by iamhe77
Yes Welcome!!

What version did you get? And where are you based?

Thanks for the replies guys. Haha the soarer was an awesome car though, loved that V8 sound and smoothness, not bad for 1992! Even by today's standards

The M35 I'm getting is a 2003 250T, with leather, sun roof and adaptive cruise. I was thinking of getting the ARX because of the LSD but figured I wanted this car to be more of a cruiser rather than bruiser (with minor mods for a bit of extra zing). That's what the AE86 is there for!

Hmm... I also really liked the look of the Axis and there was a couple for 23k... but twice as many km's and no cruise control... then again, who knows if the km's on mine are even close to genuine!

EDIT* Oh I'm based in Geelong, VIC

Edited by Vesza
I was having overheating problems with mine.

Turns out the radiator was about 60% blocked.

The tubes are very thin and will block easily. Its a pretty cheap replacement.

Yeah, wouldn't surprise me if they hadn't done a single coolant change over in japan. But I'll be sure to keep an eye out for it.

Enjoy! there are not really many problems with them other than the turbo (mines yet to have issues @ 120,000k)

Brakes are a bit shit house, get some slotted rotors for a 350z touring(non brembo) for the front with some decent pads.

Air filter is from many jap cars. i think i searched a wrx or similar and got a k&n one for about 60 bucks

otherwise enjoy! i've put about 20,000 on my car since owing it and not had any issues at all.

Enjoy! there are not really many problems with them other than the turbo (mines yet to have issues @ 120,000k)

Brakes are a bit shit house, get some slotted rotors for a 350z touring(non brembo) for the front with some decent pads.

Air filter is from many jap cars. i think i searched a wrx or similar and got a k&n one for about 60 bucks

otherwise enjoy! i've put about 20,000 on my car since owing it and not had any issues at all.

That's what I want to hear! :thumbsup: I won't really be thrashing mine anyways, as mentioned before just for a comfy cruise, with a bit of kick.

Got mine at 80,000kms. Since then it has done 34,000kms.

Only "fault" was the throttle body got too much soot caked on it and needed a clean (was stalling etc since the butterfly was getting stuck and not allowing enough air through on idle). Cost $0 to fix and took ~2hrs - I am not a mechanic by any stretch of the imagination.

Turbo is still going fine, and my car is mechanically 100% stock. The exhaust is somewhat restrictive, but from experience I've found that the flow-on effects from just changing the exhaust on a turbo car can be very expensive collectively. Its one of those things, you cant change one thing without affecting several other areas.

The auto gearbox is pretty laggy at times, which I think mainly comes down to heat. A better trans cooler should help.

My brakes are now starting to shudder when slowing down from higher speeds (80km/h +) - probably need machining.

Other than this it really has been a very reliable wagon.

I also owned a series 2 stagea before this for 2 years. It had some initial problems (turbo & suspension) but once these were fixed it never had any other problems. I put 70,000+ kms on that one (yes I do tend to do a lot of kms each year - I love driving).

I wont run through my list of issues.......I think theres a word limit!!!!!

Sorry going though a hard time at the moment with mine.......they are generally pretty good cars!.....apparently :thumbsup:

Got mine at 80,000kms. Since then it has done 34,000kms.

Only "fault" was the throttle body got too much soot caked on it and needed a clean (was stalling etc since the butterfly was getting stuck and not allowing enough air through on idle). Cost $0 to fix and took ~2hrs - I am not a mechanic by any stretch of the imagination.

Turbo is still going fine, and my car is mechanically 100% stock. The exhaust is somewhat restrictive, but from experience I've found that the flow-on effects from just changing the exhaust on a turbo car can be very expensive collectively. Its one of those things, you cant change one thing without affecting several other areas.

Sounds promising! Yeah I guess once you start changing things like a restrictive exhaust on a turbo car the boost will naturally increase, turbo life shortens, gearbox/diff cops more abuse etc. I'm prob hoping to keep mine stockish for awhile as I do about 80km of driving a day.

Sounds promising! Yeah I guess once you start changing things like a restrictive exhaust on a turbo car the boost will naturally increase, turbo life shortens, gearbox/diff cops more abuse etc. I'm prob hoping to keep mine stockish for awhile as I do about 80km of driving a day.

You can certainly modify these stageas reliably, but my point was that it all costs and I am unable to justify those costs in my current situation. The exhaust and turbo would be the 2 most expensive mods, and maybe aftermarket ecu as well. I went down that road with my last stagea and it was rewarding, but too expensive for me to do it all over again.

I too am one of those who have found our cars to be amazing and very rewarding to drive. The only problems I've had are brake shudder which thew rotors needed skimming and some strange suspension noise when you go onto driveways on full lock.

I too am one of those who have found our cars to be amazing and very rewarding to drive. The only problems I've had are brake shudder which thew rotors needed skimming and some strange suspension noise when you go onto driveways on full lock.

Its just the metal stopper for full lock rubbing up and down on a metal plate. Nothing to worry about but you can rub a bit of dry lube on it to shut it up.

Obviously brake shudder is a common thing- the RX I drove the other day had it too...

Andy, I have had brake shudder from every Jap import I have owned. I dont know what causes it but the disks just need a skim with the brake lathe, $20 a corner. (or a GTR/Brembo upgrade.) :)

I heard the brakes are a bit sub par... but coupled with the weight and performance of the car, it doesn't surprise me if the brakes cop a serious hiding, lol. Unless they're over tightening the wheels after fitting new tyres at the compliance place...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Bit of an update to this one. Having some issues on the dyno that held us back (boost spiking) and I want to pass some info over you guys and see what you think is wrong with my setup. The current readout on this dyno is 462rwkw on a low reading dyno so keep in mind it is a real world 500rwkw setup on a hub dyno. Don't read into the power figure too much as a sign of the issue. The short and curly of it is: 2.8 Litre Racepace build RB25 NEO N/A Head with VCT (internally standard however ) Borgwarner EFR 8474  Turbosmart 50mm Straight Gate + Mac valve 6Boost Manifold 4" dump to full 4" exhaust (nil restrictions) Wastegate plumbed back in and all angles in the exhaust system are acceptable and not too sharp. GFB SV52 BOV in cooler piping  Turbosmart BOV in EFR Housing   The issue we are having is it comes onto full boost for example at 4000rpm and spikes to 24/25psi, before dropping down to 17psi before slowly rising back up to the target boost of 23psi. It was extremely uncontrollable and the tuner actually had to ramp in boost progrssively with each 1000rpm on each boost setting we selected to try and reduce the amount of spiking. Sometimes we would see a drop of 10psi from the peak at the beginning of the run, to the low, until it took the next 500-1000rpm to stabilise back up to the target boost. The tuner is pretty confident that the straight gate is just a poorly designed product and leaks too much boost upon cracking the gate open and theres no way to fix it other than going to a poppet valve. He's also confient theres no ignition breakdown or floating valves. The fueling is extremely stable as well. Turbo speed is somewhere around the 109,000rpm area. The spanner in the works for me is that prior to this Borgwarner and StraightGate, the car was tuned on -5 twins at a diferent tuner, and he also had issues controlling the boost with it spiking around the same rpm range, so to me this sounds like the same issue and it can't be anything on the turbo side as this was all changed and I think the behaviour is extremely similar, if not the same. We also removed the mac valve and did a run on wastegate pressure and it still spiked and had the same behaviour. My thoughts on possibilities are: Boost Leak VCT Cam Gear isn't reliably activating consistently - (On this however, we did a run with the VCT disabled and the boost still spiked) Turbosmart BOV is not handling the boost? However this seems unlikely to not be able to handle 20psi. I have a couple of logs that I can't make sense of if anybody knows how to read them and can obtain further logs of other parameters if they are not enough, happy to pay for anyones time. The dyno readout with the power figure is the most recent last week. The other picture is from two weeks prior to that where we couldn't break 400kw (we removed the cat), however the issue of the boost control persisted. @Lithium @Piggaz @burn4005 @GTSBoy @discopotato03 I've tagged those that were quite active in recent pages here, no disrespect to those that know turbos well but I missed tagging. Cheers 
    • I recently purchased a 2018 Infiniti Q60, which has an SD card navigation map. I can see my system has options for real time traffic updates etc, and am wondering if there is something I can purchase to get this working? I can see there are at least updated maps for USA and Canada, but nothing for Australia. Surely Infiniti took changing road systems and city expansions into account when they decided to use an inbuilt navigation over Android Auto/Apple Car Play, or are we doomed to drive on streets that don't exist in the navigation system if you drive to a new area?
    • Luckily I didn't put in etch primer as I just found out it's not compatible with my body filler lol. Also just need to sand the panel anywhere between 150-400 grit so I'm in the clear there. It does say to not apply to soft old paint, I assume that means paint that is flaking, peeling,etc
    • @dbm7 and @GTSBoy thank you both very much! will give that a shot!
×
×
  • Create New...