Jump to content
SAU Community

Recommended Posts

who installs anchor points? i need to get some put in the E50

is it a panel shop?

just do em yourself. get the right bolts and parts from nissan (like $10 bucks from memory for maxima ones)

there's some uglay ass and stock r32's in that bunch. canadians seem to have the most win out of all that, guess they've got US spec stance and Japan spec cars.

Yeah I know,

Hope mine looks decent.

AUS, Canada, NZ and Euro seem to love their R32's.

Canada has good stance NZ has good drift pigs LOL!

just do em yourself. get the right bolts and parts from nissan (like $10 bucks from memory for maxima ones)

i was going to get max to do it... dunno if he has time at the moment, as always hes busy non-stop with his restorations.

might pop it up on the hoist and see what i have to do... if its as simple as welding a couple of those bolt plates in i'll do it myself.

i was going to get max to do it... dunno if he has time at the moment, as always hes busy non-stop with his restorations.

might pop it up on the hoist and see what i have to do... if its as simple as welding a couple of those bolt plates in i'll do it myself.

I complied a few cars and all we did was tap a thread into a structural part and bolt a hook into it. then again they already had allowances for mounts on the chassis. Depends if you ahve to reinforce the area. Ask your compliancer, they should know.

nah r33. its a skyline. it looks better than an R32 GTS, looks heaps better than an R31.

i know its gona be slow n shit but mehh...

would look tops resprayed in the red thats on 350z's with pulled guards, GTR front bar. S2 grille + headlights and old school meshies. sitting nice and flush.

fuck off. you're going full retard if you waste a cent on an N/A R33. Everything you spend on it should be unboltable when you want to resell it (and you will, no one ever gets attached to an N/A R33). This means no respray, and no pulled guards. Stop wasting money, and living pipe dreams.

I complied a few cars and all we did was tap a thread into a structural part and bolt a hook into it. then again they already had allowances for mounts on the chassis. Depends if you ahve to reinforce the area. Ask your compliancer, they should know.

fuck off. you're going full retard if you waste a cent on an N/A R33. Everything you spend on it should be unboltable when you want to resell it (and you will, no one ever gets attached to an N/A R33). This means no respray, and no pulled guards. Stop wasting money, and living pipe dreams.

LOL!

Worst Skyline ever made.

why not go r34, it shits on all the other models :laugh: .

on another note its such a nice night i can hear all the fags trying to do burnouts in there commodores, i hope they lose there legs because there cars sound sooooo shit.

where u live ?

I complied a few cars and all we did was tap a thread into a structural part and bolt a hook into it. then again they already had allowances for mounts on the chassis. Depends if you ahve to reinforce the area. Ask your compliancer, they should know.

f**k off. you're going full retard if you waste a cent on an N/A R33. Everything you spend on it should be unboltable when you want to resell it (and you will, no one ever gets attached to an N/A R33). This means no respray, and no pulled guards. Stop wasting money, and living pipe dreams.

i said it would look tops.. i didnt say i would do it! :D

nah its just gona be a decent set of wheels and a GTR front bar(i hate the gts/t fronts)

lol gtr-boy you'd buy the farken heavy slow n/a R34 or the GT-R only without ever havin driven the other models? you should stick to your hilux :huh:

R34 GT-4 + RB26 = 4 door GTR

drove an auto R33. and the hilux is just sitting there. just want the damn thing gone. got it listed for 3k

R34 GT-4 + RB26 = 4 door GTR

R34 GT-4 + RB26 + turbos + intake + front pipe + flywheel + clutch + wiring loom + ECU + brakes + diffs + exorcist + hub assemblies + brake booster + gearbox + ATESSA controller + dreams + G-sensors + radiator + radiator support + hopes + bumper support + bumper + front guards + rear guards + respray + bonnet + instrument cluster + GTR dash insert + dash mounted gauges + fuel pump + fuel regulator + water pump + oil pump + alternator + starter motor + prayers = 4 door GTR

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I thought I'd come back and add something I JUST learned. A Toyota LandCruiser with a 1HZ, mates perfectly with a bottle of Nulon brake fluid. As in, it perfectly screws in. Great make shift funnel when you cut the bottom of it off. This may work for your Corolla.   Unfortunately, tipping a 10L drum is much harder than a 4 to 6L bottle, and they no longer include the easy pour tap which was just perfection to use previously.  
    • Guys since i bought r33 gts25t coupe 1994 automatic a/t(manual swap 350z gearbox)  all i got is problems, always problems. Lets start with that when i turn key into ignition(ON) fuel pump doesnt always works. Sometimes i have to turn key twice Off/on/off/on until it primes. Its new, dw300 - 340lph. My gearbox broke so i did gearbox swap, install different intake manifold, injectors and i take pipes. Car was sitting in garage for more than half a year. I did assembly all not that long ago and when i turn ignition cant hear prime. All of sudden it stopped working. Theres many videos on YouTube how to make relay mod on r33 straight from battery so i did and it doesnt work! 😰 30 - battery positive  87 - positive from fuel pump to relay 85, 86 - one of two wires from original fuel pump wires(light blue, grey) and it didn’t work. so I check on ignition and took original BLUE relays wires from trunk, next to fuses. (I believe it’s IGN+ and ECU pin 18. it didn’t work…  tried connecting (IGN+ from og relay) and (ECU 104 from 1of4 FPCM wires) to my new relay 85/86 and it didn’t work.  I unplug FPCM. Didn’t work. im thinking what’s wrong   fuel pump is working, if I leave IGN+ on 85 and 86 straight to ground it works but it’s just nonstop. Since it getting constant 12v after key in ON. light blue wire gives me 6-8v.  so how this should be connected? What causing ECU not giving — on pin? Or I did sth wrong and that’s why it doesn’t work? I need negative signal on ECU that control fuel pump. What this should be?
    • You can use your VIN to look up the factory part number somewhere like amayama, and then look to order new if necessary. https://www.amayama.com/en/genuine-catalogs/nissan Depending on price you might want to rebuild instead. @GTSBoy I had an interesting insight into US market parts when the Titan rear calipers were sticking. New calipers were dirt cheap, about 20% more than a rebuild kit....they are just considered throw away maintenance items
    • Funny, but really not funny. Thank god (most) f the world has moved on since then
    • Lots of votes for driving onto a plank first; that is the quickest way I've found, 25mm is enough for my case but that will vary by car It also depends where you are going for. On the 32 I can get to the rear diff with my floor jack if I do that end first, and get it up on stands. Then I lift the front from either front tow hook as high as needed, also onto stands. Sometimes I need a small lift on the other tow hook to get it level enough If I do the front first I can't get to the rear diff because of the angle of the car Other options are getting to the front mount of the rear subframe from in front of the wheel (if only lifting one side, or just do both which is a bit of a pain compared to one lift from the diff), or also the gearbox cross member mount on the driver's side if you are  just trying to lift the driver's side. I This is the jack I use; it says 75mm clearance but of course that is only on the lower section so if you have to reach too far in like the diff you still get stuck. https://www.snapon-bluepoint.com.sg/category/Floor-Jacks/product/Floor-Jack,-2-Ton-Low-Profile
×
×
  • Create New...