Jump to content
SAU Community

Recommended Posts

i rkn u might need spacers 18x9.5 +20 isnt very aggressive fitment obviously depends what you want but im running 18x9.5 +15 on the front of my 33 but it does have wide front guards but 34s have wider guards then a 33 anyway..

if that makes sense haha

well i was thinking seeing as this is my daily i cant go too crazy but when i had these wheels on the car which is 19X9.5 +20 with very very very thin profile rubber it was pretty aggressive for me

DSC_3004.jpg

on my 18's i will have 30 profile rubber with not as much stretch and the front has been lowered a little since so might work. rears i may need spacers.

What i plan on putting on the evo 18x9.5 +20 will be flush as most ppl dont run more than a 9 +30

img34391000sized.jpg

img0811u.jpg

img0805z.jpg

img0804qv.jpgi4j193.jpgfxb9d.jpg

4061536225574b790304o.jpg

3280207750f8c08926dao.jpg

img7076.jpg

Nothing looks sicker and fills out the guards better on an EVO7 - X then a set of 19" Advan RS's

These are only 18s but you get the idea...

Picture_001.jpg

18x9%2029%20Advan%20RS.jpg

The 19s just look awesome on it... fell in love with them ever since i saw a gun grey EVO 8 on JSpec a long while back with Gun Grey 19s on it, dumped... was instant jizz. On yellow, like Dezz said, Black... or gun grey.

What i plan on putting on the evo 18x9.5 +20 will be flush as most ppl dont run more than a 9 +30

img34391000sized.jpg

img0811u.jpg

img0805z.jpg

img0804qv.jpgi4j193.jpgfxb9d.jpg

4061536225574b790304o.jpg

3280207750f8c08926dao.jpg

img7076.jpg

There are TE37's yeah?

No sticker, just making sure that's all.

That would looks so nice on a EVO.

would need to go black on the yellow imo

+1

Yellow car / Black wheels.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...