Jump to content
SAU Community

Recommended Posts

ah ok, the guy at importmonster told me that the offset difference wouldn't matter for GTR?

if the wheels are the same width, but have different offsets, then that's fine.

if the wheels are staggered, and the total rolling diameter of the wheel including the tyres is within 1% of each other, then that's fine too.

anything else will cause issues with ATTESA.

that red GTR looks mean!

so 19 x 9.5" +11 and 19 x 9.5" +21 if i put 255s on all 4 that would be completely fine?, might offer him 2.5k

no. you'll run the risk of fouling on the front suspension as it sits a few mm further in than normal, and it'll be about 1cm inside your fenders, so you'll ed up with flushness fail. you can run spacers if you want, that'll fix your issues, but for $2.5k I'd want it to be fucking on point to start with.

those wheels are supposed to go on V35/V36/Z33/Z34, not GTRs.

It'll work if you run spacers, and I'd only run spacers on wheels I buy for less than 1.5K. Anything more than that and I take my time to make sure I get them in the right offset, or I'm prepared to alter the car to make em fit if they're too epic to pass up.

What exactly is your job description Pat? :P Good pay for eating chocolate or nah?

haha im a process engineer at the research & develop. department within cadbury

Just started so im still going through the induction crap but I put my hand up for as many taste testing sessions as possible :D

haha im a process engineer at the research & develop. department within cadbury

Just started so im still going through the induction crap but I put my hand up for as many taste testing sessions as possible ;)

Ah nice. Sounds like a good job.

Well Matt has GTR front end i think anyway including quarter panels(at work cant see pics at the moment)? and seems to fill that out nicely as for rears i thought he had to pump / roll his out a bit 10" with +15 i would of thought they would look hot on a 33 GTR? might give him a cash offer ;) so Matt takes care of his bling bling? haha

On a different note i want to buy one of those 33 GTR rear defuses, carbon fiber <3 $500 from psiparts

they'll look hot, but they won't be flush.

ah fuck it, you'll probably never lower your car to epic stance anyways, so nobody will notice that they're 7mm further in than they should be.

he better be giving away a free reacharound with em at $3700 tho. or at least offer to cup your balls for a solid 5 mins.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...