Jump to content
SAU Community

Recommended Posts

aren't you just gonna get pwnd again anyway? stick to stock mr under-the-radar-track-day-specialist.

After going through a full epa, defects are a walk in a park, so fk it. Im over trying to please the government. No matter how hard you try they still shaft you. Least if i tuck them under the guards I wont get another "wheels protruding outside guards" defect haha

XXpsi actuator + red painted injectors should keep EPA away for a long time.

Still deciding which actuator to get. My rebuilt hks2530 has zero shaftplay after 2yrs when running 15psi. Might push it to 17psi if i find an arc/apexi return-flow front mount.

Still got my water/meth injection system sitting in the cupboard. Might fit that in for some 22psi fun.

Still deciding which actuator to get. My rebuilt hks2530 has zero shaftplay after 2yrs when running 15psi. Might push it to 17psi if i find an arc/apexi return-flow front mount.

I should check what boost I run with the HKS actuator. From memory it was about 14psi.

I should check what boost I run with the HKS actuator. From memory it was about 14psi.

yeah standard hks actuator is about 14psi. Needs moar

i love finding little secrets about my car, check out the ecu, has anyone got any info on this?

post-41669-1286791319_thumb.jpg

post-41669-1286791386_thumb.jpg

nice! Nismo tuned ECU. Would love to see the fuel map for that. those stickers are JDM! Stick them on your forehead.

i was thinking the same thing when i saw it :D

better test it out to make sure ;)

yeah standard hks actuator is about 14psi. Needs moar

nice! Nismo tuned ECU. Would love to see the fuel map for that. those stickers are JDM! Stick them on your forehead.

mmm just go buy a garrett actuator, can get in pretty much any psi for a few hundy

yeah standard hks actuator is about 14psi. Needs moar

nice! Nismo tuned ECU. Would love to see the fuel map for that. those stickers are JDM! Stick them on your forehead.

the fuel map is rich thats for sure lol. it makes sense why it pops and backfires alot and smells very strong of fuel out the exhaust.

mmm just go buy a garrett actuator, can get in pretty much any psi for a few hundy

yeah this is what im going to get with the GTST bracket.

http://www.gcg.com.au/index.php?page=shop....1&Itemid=53

Just need to pick the psi setting on the drop down menu! decisions decisions!

yeah this is what im going to get with the GTST bracket.

http://www.gcg.com.au/index.php?page=shop....1&Itemid=53

Just need to pick the psi setting on the drop down menu! decisions decisions!

just source it here in vic, there are a few garrett dealers here anyway

and they would be able to have it built to bolt straight on

i know when i got my turbo from Rotomaster they suggested it if i wasnt going to use my ebc

there was a reason why i decided to check out my ecu if you catch my drift :D

haha ;)

i love finding little secrets about my car, check out the ecu, has anyone got any info on this?

post-41669-1286791319_thumb.jpg

post-41669-1286791386_thumb.jpg

Nismo Sports Resetting ECU ehy...

Nice!

They use those on the S-Tune Sports Resetting packages Nismo do.

Hopefully you got a decent set of Nismo spark plugs (NGK) LOL!

A Nismo air filter as that is what consist of that package.

+ Your Nismo / aftermarket exhaust.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • What an awesome idea to fit the facelift Lamborghini Diablo headlights. They are a perfect fit!
    • An update regarding the registration with the DVLA I sent off the paperwork the day after I collected the car from the port, two weeks later it was all returned with a letter explaining they have rejected the application. This was because the cheque was £20 short for the road tax (I used a price list I found online). Nevermind it is what it is, it was sent back to them the following day with a new cheque. Fast forward another 2 weeks or so, I called them for an update to be told it had been rejected. Yesterday (16th September) I received the documents back along with another letter, this time it was because I didn't put an X in one box on the V750 (personalised number plate certificate), which declared that I had the rights to the personalised number plate. Why this wasn't mentioned in the first rejection letter, I don't know, but it could have saved this headache. The documents were sent back today, so fingers crossed third times a charm and it'll FINALLY be registered on the road just in time for the bad weather (woohoo!) To cheer myself up I lowered the front 25mm, was sick of seeing it sit like a monster truck. No idea how much clearance I'll have getting on and off the driveway, I'll worry about that when I can actually drive it
    • You're going to miss not worrying about rust in the strut towers like the Skyline shitboxes out there
    • A few little updates that weren't filmed due to not taking long to do or not interesting enough for their own video. My new K&N Air Filter arrived, I went with an RU-4180 which matched the dimensions of the universal cone filter the car originally had.  The battery had gone flat, while that was charging I tidied up the spaghetti wiring at the bulk head and down the sides of the engine Next job was to swap the stereo The Kenwood harness had the female ISO plugs cut off and the male ISO plugs cut off the adaptor loom and joined with bullet connectors. I ordered in a repair loom through work and re-did it all. New Kenwood unit installed (Android Auto, DAB, Bluetooth, Reverse Camera) The bonnet/hood gas struts have been poor since collecting the car. I couldn't find any suitable replacements locally so took a chance on a pair from AliExpress.  The originals don't use a retaining clip to secure the cup onto the ball fixture, would explain why I struggled for 10-15mins trying to pry off the cups. The ball fixtures unscrew using a 12mm spanner, new ones are the same size. Sadly no photo of them fitted, you're not missing much lol The dished Momo steering wheel got replaced with my Momo Tuner, turns out I ordered counter sunk bolts for the horn trim ring (like they normally are for the steering wheel) instead of allen cap (flat seat)  A terrible photo of a Quaife style gear shift knob I've had stashed in my tool box for many years after purchasing the incorrect thread size (I can see a pattern emerging with ordering incorrect parts...) Also threw in a cup holder and a (empty) Boss Coffee can, because why not  
    • GT-R clearly the better choice! The 300 is certainly not insaly fast but has a decent amount of poke. Does a nice little drift around the corners with a decent amount of throttle. It's VERY predictable in a slide too.  Feels so progressive! People probably presume there's a 25 year old driving it based on my behaviour this week! 🤣
×
×
  • Create New...