Jump to content
SAU Community

Recommended Posts

here is one scenario when it happened for the first time. so the road im on you can do 70 than once you go through the roundabout its 100 so i go in the inside lane in 3rd slow down a bit, as im halfway in it i notice some orange cones left out by the road workers so i take it a bit wider to avoid than turn in more afterwards while still accelerating and thats when snap! the backend comes out and i corrected it and continued on.

ive never had any understeer in this car, it seems if you push it to hard it just oversteers.

Boser metal hood extension finally arrived. Looks like I'm gonna have to take to it with an angle grinder after tacking it on to change the slanty eyes to evil eyes... dunno, needs a little more curvature I reckon.

5157867876_499243c1e9_z.jpg

5157259053_1691be6f8e_z.jpg

5157868526_62c4031848_z.jpg

Also needs low low asap, to match my Cefiro at least.

5157259563_2dda9a50f6_z.jpg

seriously... i'd rather go to munich and drink beer if you're gonna detour out of london

also london is fkn aids

i'll be in Germany before London, so will get plenty of beer there!

hmm another option is to catch the train to Paris, but dont think anything of interest there for me...

Pat, pick up some BBS wheel assembly bolts for me in Germany.

But seriously, get to london and fly using one of the cheapie airlines to other countries in europe. Italy for example is about $120 return. fuck spending $1000 on airfares using Qantas/British Airways.

my mate just got back from Wales he was over ther doing some army stuff and when they stopped off at london for a few days he said it was shit compared to Wales and that London has no rubbish bins around because they are scared of bombs.

yup... no rubbish bins, and trash everywhere....

HOWEVER

munich has no rubbish bins for the same reason (removed for the world cup) and NO trash

what's that tell you about londoners?

was it nick lol, that would of been scary, i hate the feel of understeer. so gtr's should understeer than or are they a bit different because there not always 4wd like evo's and subaru's.

haha :D

nah cant even drop a u-turn on a 2 lane road in the evo...... its all 3-point turns now :P

but isnt it tricky in GTRs becauce of the attesa?

so it drives around like a RWD but goes all awd n shit when the sensors feel the back end stepping out n shit

yeah thats how most sickcunts write them off cause they dont know how the attesa reacts etc

Ric the SS will be fine man, dont need to go heavy spring rates for street

they would be better than the bc/br

Pat, pick up some BBS wheel assembly bolts for me in Germany.

But seriously, get to london and fly using one of the cheapie airlines to other countries in europe. Italy for example is about $120 return. fuck spending $1000 on airfares using Qantas/British Airways.

haha get them posted to my hotel :D

yeah looking at Ryanair, cheap flights but the times are shit house. Dont think I can squeeze in the ferrari/lambo tour on Thursday as I have to get back to London somehow :P

Most gtr's understeer haha. But understeer is fixed with the gtr by pointing steering wheel and planting your right foot

you're talking about oversteer. if the front wheels dont have traction, you arent gonna get anymore by applying power to them

but isnt it tricky in GTRs becauce of the attesa?

so it drives around like a RWD but goes all awd n shit when the sensors feel the back end stepping out n shit

correct. which is why you can do this

here is one scenario when it happened for the first time. so the road im on you can do 70 than once you go through the roundabout its 100 so i go in the inside lane in 3rd slow down a bit, as im halfway in it i notice some orange cones left out by the road workers so i take it a bit wider to avoid than turn in more afterwards while still accelerating and thats when snap! the backend comes out and i corrected it and continued on.

ive never had any understeer in this car, it seems if you push it to hard it just oversteers.

you scandy flicked the car man, thats what happens when you scandy flick a car

haha :D

nah cant even drop a u-turn on a 2 lane road in the evo...... its all 3-point turns now :P

yeah thats how most sickflamin mongrels write them off cause they dont know how the attesa reacts etc

Ric the SS will be fine man, dont need to go heavy spring rates for street

they would be better than the bc/br

haha yeah i heard there turning circle isnt very good it reminds me of the episode of top gear where he tried to turn around on the runway but ended up on the grass and runways would equal about a 3 lane road lol.

cant wait till DECA next year so i can see properly how the attesa system reacts safely.

you're talking about oversteer. if the front wheels dont have traction, you arent gonna get anymore by applying power to them

correct. which is why you can do this

you scandy flicked the car man, thats what happens when you scandy flick a car

of course it is lol. im such an idiot, dunno why i didnt think of that in the first place, thats embarrissing :D oh well i shall not do it again unless another cone is left on the road in a roundabout lol.

haha im not telling you how to drive your gtr because that'd be pure and utter keyboardwarrior-ing, never having driven myself. just what it sounded like

your right anyway :D . sounds like it to me now that i think about it a bit more.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • would a r34 gtr hood line up with gt/gtt stock fenders? after latch, front bumper and hinges are swapped for gtr ones? or would the fenders be too low or high in relation to the hood surface? ( I believe seeing somewhere that gtr front fenders use some type of riser for the sides, but do not know how that relates to stock gt/gtt fenders.)    
    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
×
×
  • Create New...