Jump to content
SAU Community

Recommended Posts

here is one scenario when it happened for the first time. so the road im on you can do 70 than once you go through the roundabout its 100 so i go in the inside lane in 3rd slow down a bit, as im halfway in it i notice some orange cones left out by the road workers so i take it a bit wider to avoid than turn in more afterwards while still accelerating and thats when snap! the backend comes out and i corrected it and continued on.

ive never had any understeer in this car, it seems if you push it to hard it just oversteers.

Boser metal hood extension finally arrived. Looks like I'm gonna have to take to it with an angle grinder after tacking it on to change the slanty eyes to evil eyes... dunno, needs a little more curvature I reckon.

5157867876_499243c1e9_z.jpg

5157259053_1691be6f8e_z.jpg

5157868526_62c4031848_z.jpg

Also needs low low asap, to match my Cefiro at least.

5157259563_2dda9a50f6_z.jpg

seriously... i'd rather go to munich and drink beer if you're gonna detour out of london

also london is fkn aids

i'll be in Germany before London, so will get plenty of beer there!

hmm another option is to catch the train to Paris, but dont think anything of interest there for me...

Pat, pick up some BBS wheel assembly bolts for me in Germany.

But seriously, get to london and fly using one of the cheapie airlines to other countries in europe. Italy for example is about $120 return. fuck spending $1000 on airfares using Qantas/British Airways.

my mate just got back from Wales he was over ther doing some army stuff and when they stopped off at london for a few days he said it was shit compared to Wales and that London has no rubbish bins around because they are scared of bombs.

yup... no rubbish bins, and trash everywhere....

HOWEVER

munich has no rubbish bins for the same reason (removed for the world cup) and NO trash

what's that tell you about londoners?

was it nick lol, that would of been scary, i hate the feel of understeer. so gtr's should understeer than or are they a bit different because there not always 4wd like evo's and subaru's.

haha :D

nah cant even drop a u-turn on a 2 lane road in the evo...... its all 3-point turns now :P

but isnt it tricky in GTRs becauce of the attesa?

so it drives around like a RWD but goes all awd n shit when the sensors feel the back end stepping out n shit

yeah thats how most sickcunts write them off cause they dont know how the attesa reacts etc

Ric the SS will be fine man, dont need to go heavy spring rates for street

they would be better than the bc/br

Pat, pick up some BBS wheel assembly bolts for me in Germany.

But seriously, get to london and fly using one of the cheapie airlines to other countries in europe. Italy for example is about $120 return. fuck spending $1000 on airfares using Qantas/British Airways.

haha get them posted to my hotel :D

yeah looking at Ryanair, cheap flights but the times are shit house. Dont think I can squeeze in the ferrari/lambo tour on Thursday as I have to get back to London somehow :P

Most gtr's understeer haha. But understeer is fixed with the gtr by pointing steering wheel and planting your right foot

you're talking about oversteer. if the front wheels dont have traction, you arent gonna get anymore by applying power to them

but isnt it tricky in GTRs becauce of the attesa?

so it drives around like a RWD but goes all awd n shit when the sensors feel the back end stepping out n shit

correct. which is why you can do this

here is one scenario when it happened for the first time. so the road im on you can do 70 than once you go through the roundabout its 100 so i go in the inside lane in 3rd slow down a bit, as im halfway in it i notice some orange cones left out by the road workers so i take it a bit wider to avoid than turn in more afterwards while still accelerating and thats when snap! the backend comes out and i corrected it and continued on.

ive never had any understeer in this car, it seems if you push it to hard it just oversteers.

you scandy flicked the car man, thats what happens when you scandy flick a car

haha :D

nah cant even drop a u-turn on a 2 lane road in the evo...... its all 3-point turns now :P

yeah thats how most sickflamin mongrels write them off cause they dont know how the attesa reacts etc

Ric the SS will be fine man, dont need to go heavy spring rates for street

they would be better than the bc/br

haha yeah i heard there turning circle isnt very good it reminds me of the episode of top gear where he tried to turn around on the runway but ended up on the grass and runways would equal about a 3 lane road lol.

cant wait till DECA next year so i can see properly how the attesa system reacts safely.

you're talking about oversteer. if the front wheels dont have traction, you arent gonna get anymore by applying power to them

correct. which is why you can do this

you scandy flicked the car man, thats what happens when you scandy flick a car

of course it is lol. im such an idiot, dunno why i didnt think of that in the first place, thats embarrissing :D oh well i shall not do it again unless another cone is left on the road in a roundabout lol.

haha im not telling you how to drive your gtr because that'd be pure and utter keyboardwarrior-ing, never having driven myself. just what it sounded like

your right anyway :D . sounds like it to me now that i think about it a bit more.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...