Jump to content
SAU Community

Recommended Posts

What business you doing?

Car washing/detailing :) I start my training in a week or so.

Like I'm good at that shit already (washed my cars 2+ times a week for the past 2 years) but I need to learn the professional techniques before I'm confident enough to let loose on a $100k Mercedes :P

Think so, check the box on fb

Edit: bf series

Lol might be a fake gauge then. As only the racer series were able to be used without the cotrol box. And would explain why it doesn't work. A boost gauge is a very simple mechanism

Car washing/detailing :) I start my training in a week or so.

Like I'm good at that shit already (washed my cars 2+ times a week for the past 2 years) but I need to learn the professional techniques before I'm confident enough to let loose on a $100k Mercedes :P

Ah yes!

I remember talking about that to you last year... Or was it earlier this year...

There is a training course for car washing?

Lol might be a fake gauge then. As only the racer series were able to be used without the cotrol box. And would explain why it doesn't work. A boost gauge is a very simple mechanism

Yeh it is a fakey. I think I got the connections wrong. I'll have to check everything again when i get home

Ah yes!

I remember talking about that to you last year... Or was it earlier this year...

There is a training course for car washing?

Was probably someone else, coz I only came up with the idea recently.

I'm not doing a course, just getting trained up by someone who does it for a job already.

Have also been watching a lot of online guides. With the 2 combined I should be off to a good start :)

Was probably someone else, coz I only came up with the idea recently.

I'm not doing a course, just getting trained up by someone who does it for a job already.

Have also been watching a lot of online guides. With the 2 combined I should be off to a good start :)

Yeah it was you, I remember telling you to budget out your car wash equipment, like Car Wash Solution / Polish Solution / Sponges / Shammies etc.

:D

wouldnt that have been a good business 5 + years ago? my mate runs a car wash rkns its going backwards hard since people can wash there cars at home etc.

Nah, heaps of rich kents in my area still take their car down to places like "Suds @ Mentone" to get their cars washed coz they don't have time to do it themselves.

I'm taking it one step further and going MOBILE so they don't even have to leave their own house. Ultimate convenience :) And cheap business to start up.

If it all fails then I can just use all the materials to wash my own car :P Can't really lose.

Edited by jezza boii

Yeh it is a fakey. I think I got the connections wrong. I'll have to check everything again when i get home

Man I got an apexi gauge fake. Told the gut to get f**ked and returned it. It would not work. They are all shit. Tried to get it to work for hours and couldn't. Went and got a real apexi. 2 seconds and it all worked

what ever you do, dont drop the sponge and continue rubbing the car with it

watched the vcals do this while they were cleaning the teachers cars.... lulz were had

kris- i got mine off a trader on here, knew it was fake, seems legit. ill see how i go, if it wont work ill give him a buz

Edited by Mohsen

what ever you do, dont drop the sponge and continue rubbing the car with it

watched the vcals do this while they were cleaning the teachers cars.... lulz were had

kris- i got mine off a trader on here, knew it was fake, seems legit. ill see how i go, if it wont work ill give him a buz

So an Sau trader is selling counterfeit defi gauges? Wow :s

76687_457404434299_618369299_5524622_1868928_n.jpg

:rofl:

Jizz boy got a pay rise, or his "Band" must be kickin' off.

Only thing sadder than taking a photo of money is taking a photo of money with f**k all money in it.

im driving to sydney tomorrow. dont ask why im driving

I drove there for last years footy trip. Left at about 5-6am and drove there all alone, only stopped once for petrol and food...It wasn't too hard at all. A thermos of black coffee meant I didn't yawn once the whole way there (had about 3 hours sleep the night before), and I can't even drive 25-30 mins to/from work without yawning like 10-20 times lol

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
    • ECUtalk pages don't mention they support the ABS computer (consult port has more than one CAN), so you might just need a different scan tool. But, I would expect ABS is a different light to the brake warning/handbrake light, do you see an ABS light come on for a few seconds when you turn the key from ACC to IGN? But since you said: I'd have a look at the ABS sensors in the rear hubs to make sure they are not damaged, disconnected etc.
×
×
  • Create New...