Jump to content
SAU Community

Recommended Posts

As if you'd come all the way out here for a steak...

You're welcome to come the next time I go back for the 1kg challenge though..

Like

Got the 500g rump to sus it out before going back next time for the 1kg challenge. finished it in about 13 minutes including the chips coleslaw and salad (you get 30 minutes for the 1kg challenge) without really rushing, so I think I can complete the challenge...If I do, that'll be a 1kg Rump (which was quite nice) for $20. Can't lose.

so you recommend?

so you recommend?

Well the rump I had was decent, so I'd assume the rest of the cuts which are generally better would be good...

One mate had the t-bone and rated it, 2 others had the mixed grill, gave that the thumbs up...And their mrs' had a parma, said it wasn't the best, but I personally wouldn't order anything other than a steak at a steak joint...

f**k me some people are so stupid. 2 way road, single lane each. dotted line, slow driver infront of me

over take at about 50, limit was 60

so i speed up to overtake, the idiot speeds up too so i cant pass

anywayxZcG7.gif

f**k me some people are so stupid. 2 way road, single lane each. dotted line, slow driver infront of me

over take at about 50, limit was 60

so i speed up to overtake, the idiot speeds up too so i cant pass

anywayxZcG7.gif

i want to see the full vid of this please.

did some plastic welding on the weekend with some help from one of Bez's recommendations in Cheltenham.

5358487038_85301ee183_z.jpg

5358486440_6599933fcf_z.jpg

5357876299_1e69d4f8ee_z.jpg

5357877383_3f09dc6437_z.jpg

5358490576_bda6db6890_z.jpg

Golf's ass will now be butter smoooooooth. none of this gaybo vent shit that the stock R32 bumper seems to have. Filler piece sourced from a VN Calais :/ Feel dirty for having holden pieces on my car, but felt good choppin one up.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...