Jump to content
SAU Community

Recommended Posts

Even Paul walker was poking fun at chromies and spinners.

Also, that C10 GTR :O

Twas nice, was not expecting to see an old school gtr thats for sure

Where's this one supposed to fit in with the others?

Wasn't one of them a prequel?

Think the beginning of 5 is the end of 3 or something like that. Was confused i've only seen 1 and 2 had to get my mate to fill me in throughout. Oh and Keep watching after the credits are finished...

Bit early in the morning for you?

I never said he body wasn't tight - just her funbags, which will look like half eaten bags of rice when unleashed

Bit early? :P I pretty much don't sleep lol.

I agree, in that pic it looks that way, but in the movie you'll see it's not the case :) She's also a bit flatter than that I think.

Birds, do you still have plans for tonight? Gathering at mine if you're keen (same goes to anyone else, except mohsen)

Bit undecided on plans at the moment cause I was supposed to head down to PI, but my lift changed our plans and left yesterday which I couldn't make. Weighing up if I cbf driving down alone...will msg ya later on.

So my water pump is leaking coolant, got home and within 5 min there was a puddle...

Should I replace just the water pump or go all out, N1 water pump, trust/greddy timing belt, HKS cam gears???

Suppose depends how much you wanna spend and future plans..

,

Other news drjays rocks!

So my water pump is leaking coolant, got home and within 5 min there was a puddle...

Should I replace just the water pump or go all out, N1 water pump, trust/greddy timing belt, HKS cam gears???

Depends if you need your 100k service or not, or else I'd just do the pump. Read somewhere that cam gears on RB25 don't do much compared to 26

And yeah, I went to racepace for them to do the work - I got parts from Kudos (cheapest and tomei cam gears ftw.)

Cam gears

Bearings & seals

Belt

Water pump (just went stock one)

Fuel filter

And then they had to replace rear rotors and pads and they fixed a few other things up replaced oil on everything.. got a invoice somewhere be prepared to have a little more spare if your going in for a service but looking at 1k ish for just the engine stuff.. everything has to come out.

My invoice was 2k, but that was everything down to the windscreen blades, and slotted rotors / race pads obviously racepace are a bit more pricey than some places but they sure do know what they are doing. And local for me.

Going to Trent for my tune though, bit cheaper and considering he is JUST primarily a tuner and only heard good things I believe the car will be in good hands.

Forgot to mention, Chris at racepace called me often for updates which was great - rather than just doing the work and hitting you with the bill afterwards and didn't mind talking about options over the phone.

Edit: I went HKS cam gears at first but after talking to tuners apparently not the best because they only have 3 bolts and can possibly come lose and there goes your engine, whereas Tomei have 5 bolts - go the Tomeis.

A fellow connoisseur, Im impressed.

The sag is evident by the shoulder to approx nipple distance it's far to low to qualify for perkyness. Ask any man, any real man he'll tell you

I didn't wanna have to do this, but you cunts leave me with no choice.

Shay Laren. End of discussion

That's an arm and leg if it's labour cost... Jebus!

Haha went all out! I ordered 3 hats mid last week, should be here hopefully Wednesday ;)

What kinda hats you boys talking? 59fifty? if so where from and how much you paying?

You're assuming they'll sag without having seen them out of a top/bra...Shay Laren has her well and truly covered for size, and I wouldn't say they're hanging at her knees..

That and the fact the rest of her is amazing, there's no point wasting time talking about some other chicks cans you haven't seen..

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Bummer...yeah i "need" something to "ease" up the work and for my driving it would be enough.    Iam counting the tune "without" turbo. I do not mean "cheap" like something from Temu around 200 USD, "Cheap" is something around 1000 USD? 
    • Starter motors used to use the weight of metal (magnets) to provide torque. Now they use (more) current instead. This. It's completely normal.
    • So thing that had me stumped, but I think is OK....is that when it was up in the air, in neutral I had it running to bleed to coolant while I put the wheels back on. I noticed the rears were turning (slowly) which I'd never seen before 20250928_163512.mp4     Because there had been an issue with clutch slip due to pedal adjustment on the dyno, I assumed there was still and issue so spent some quality time upside down under the dash adjusting the pedal....but no matter what I did the wheels still turned in neutral. Even disconnected the master cylinder to pedal rod and same. In despair, I even removed the clutch slave so there was no chance of any preload causing it.....still happened. So either: 1. Something is not right in the bellhousing, or 2. Its a thing sometimes with cold, thick gearbox oil Internet says it might be 2, I hope so!
    • OK, few more things sorted and it is ready for a shakedown on 10-Oct, with one weird thing. Changed the run in oil and filter for the good stuff. 8l came out, about 8.5 went in with filter so that looks all good. Changed the starter (again), this time for a brand new one, works good. Interesting that the Taaaarks one is shorter than factory but spins harder, I guess electronics have moved on a little in the last 30 years. Will be nice to have a bit of extra space under there. Put the timing cover back on, and noted where the cam gears were set as a record.  Will need to double check the timing but it is pretty close. Also put the coil pack cover and intake snorkel back on. Exhaust Inlet Changed the water out for coolant, bled up nicely. Removed the rear brake pads (well worn factory sumitomo ones!), gave the hardware a good clean and reassembled. I've put bendix XP on the back again because the price is excellent at $150 a set and they worked well on the V37. Front pads have plenty so no issue there
×
×
  • Create New...