Jump to content
SAU Community

Recommended Posts

The 6266 would match the current power on some decent boost. But if u want to out power the T51r u may need to use a 7 series PT.

What are u going to use the car for? How laggy is it now?

Was planning to use it at the drags here in Tassie but looks like our track is closed down.

Its making 24 psi @ 5200 but my exhaust system was restricting it.

Which box is it exactly? I'd be more inclined to go a 6466 or 6766, if it's a power sucking C4 :) They are rated at 900/935hp.

I have the power sucking C4 :rolleyes:

if the 6262 goes 500 it must be the best turbo in the world, response of factory turbos and power of a large laggy heap of crap.....

I'd like to go up to Jez's dyno when my engine is done. Put it on there for 2 or 3 power runs then overlay it. From whats been shown so far, it could be big single time ;)

I'd like to go up to Jez's dyno when my engine is done. Put it on there for 2 or 3 power runs then overlay it. From whats been shown so far, it could be big single time ;)

FOR SCIIIEENNCEEEEEE!!!!!!!!!!

Sorry, couldnt hold it back. Now do it.

I am sure a 6262 could do that power on a DD, and that would not make it the best turbo in the world imho as there are others in similar territory. Here is an old example of what these turbos can do...

I woudn't look to AWD motorsport stuff to see what that would do(or any precision)..lol, unless you want to run no gate and

let the sucker make what it makes..lol, he did that on supraforums to a customers supra aswell,, 7675, making 7680 numbers.....and he did it to the record setting lancer in the video above , the thing apparently nuked itself not long after

I like his attitude and his balls though, haha

cheers

darren

Edited by jet_r31

I woudn't look to AWD motorsport stuff to see what that would do(or any precision)..lol, unless you want to run no gate and

let the sucker make what it makes..lol, he did that on supraforums to a customers supra aswell,, 7675, making 7680 numbers.....and he did it to the record setting lancer in the video above , the thing apparently nuked itself not long after

I like his attitude and his balls though, haha

cheers

darren

Of course that is kill mode, but that's serious business for a 62mm turbo without nitrous oxide

76mm compressor, garrett Gt42 S trim turbine(aka 4202), so sameish size as what you have( or same size as GTX4202), but if you have no

track i'd go smaller, be a toss up between a 6766 and a 7175 i reckon..

cheers

darren

Edited by jet_r31

PJ, what have you seen the 6262 and/or 6266 go to power wise?

Will the 6266 crack 500?

A 6266 will crack 500rwKw all day on an efficient engine. A mate of mines car made 491kW on a plain jane GT35 with .82 T3 housing, then went out and ran a trap speed of 147mph, 1400kg car including driver!!!

Yeah that sounds more like it Lithium, 900whp is a MASSIVE number given the size of the compressor and turbine wheels

My 6766 peaked at 853hp on Mainline at 42psi, running it any harder may have just caused drama's so we called it a day.

The yanks have gone very fast with these turbo's no doubt, they also have the cars setup to take an absolute pounding. I believe they have gone as quick as they have without any GST on the story, I still find it amazing how they are going 145+mph on FP Red's though.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.    
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
    • Will this fit? but they are staggered set - RAYS 57DR SEMI GLOSS BLACK 18x8.5 +37 | 18x9.5 +38 5-114.3 STAGGERED SET   or If no go could just get a set 4's wheels of 18x8.5 +37 5-114.3 - would i run 8.5's 235s up front n 245's at the back if I do?   Thanks.        
    • Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
×
×
  • Create New...