Jump to content
SAU Community

Recommended Posts

FANGA%20FORMULA%20D.jpg

battles.preview.jpg

formula%20d.............jpg

Holden-Commodore-VY-NZPC-146-04-112x75.jpg

http://www.performancecar.co.nz/news-5900/...-vy-nzpc-146-04

2004 Holden Commodore (VY)

Engine: Nissan RB26DET 2.6-litre DOHC 24V, factory internals, factory cylinder head, Master Power T-60 turbocharger, Trust air filter, 4-inch silicone intake hose, 600×300x80mm intercooler with custom GT-R end tanks, GReddy Type R blow-off valve, Tial 44mm wastegate, Bosch Motorsport 044 fuel pump, custom surge tank, NGK Iridium spark plugs, custom steam-tube headers, custom 3-inch downpipe, 3.5-inch exhaust, Trust mufflers, 50mm custom alloy radiator, twin electric fans, 32-row oil cooler, Link G4 Xtreme engine management system, custom wiring, custom oil catch can, remote oil filter

Driveline: R33 GT-R gearbox modified to rear-wheel drive, Xtreme Drift Clutch triple-plate carbon clutch, 3.9:1 HSV differential, Harrop rear housing, modified driveshaft

Suspension/Brakes: Modified Tein Super Street suspension, Tein springs, Whiteline swaybars and links, Nolathane bushes, factory brakes, uprated pads

Wheels/Tyres: 18×9.5-inch TSW Beyern 5 wheels, 265/35R18 Dunlop Direzza DZ101 tyres

Exterior: VZ Clubsport R8 bodykit, full black respray, custom Brown Brothas graphics/custom Mad Mike/CRE8GRAFX graphics, Ganador-style mirrors

Interior: Buddy Club P1 Limited Edition bucket seats, Willans harnesses, Momo Drift deep-dish steering wheel, Momo GT-R gear knob, Tein EDFC controller, D2 hydraulic handbrake, custom 8-point rollcage, DisplayLink dash

Performance: Dyno Power – 350kW @ wheels (15psi boost)

Link to comment
https://www.sau.com.au/forums/topic/319404-pretty-cool-rb26-conversion/
Share on other sites

holdens 4wd system in the adventra wasnt the best i dont think.....

It does seem a bit strange they would do that, but I guess the RB probably delivers the power smoother rather then all in on burst... Must be better for drifting if theyve spent the money to do it?

I doubt it. Wouldn't a drifter be after the most torque possible? a turboed LS1 would produce some epic torque for 2k rpm rather than 5k+ like the 26. Probably did it just to show it can be done...

yeh im not sure, they use monaros in drift with v8s still in them. The only logical reason i thought would be for the extra revs and perhaps the RB being a bit lighter? i dunno

Perhaps its easier to control higher revs then to control all that torque lower down. Havent drifted V8s so no idea on the downfalls of it

its just cool to be different. whether you like 'shittadores' or not, seing one on lock, rb26 screaming at 9000rpm, gate wide open, is wwaaayyyyy cooler than another s13. even a turbo v8 wouldnt have the same appeal if you were a spectator and saw it out on the track...

for me, it would still be cool if it were a v8, but if i heard that thing in the flesh i'd probly be running to the pits to get a closer look

Edited by VB-
its just cool to be different. whether you like 'shittadores' or not, seing one on lock, rb26 screaming at 9000rpm, gate wide open, is wwaaayyyyy cooler than another s13. even a turbo v8 wouldnt have the same appeal if you were a spectator and saw it out on the track...

for me, it would still be cool if it were a v8, but if i heard that thing in the flesh i'd probly be running to the pits to get a closer look

bingo.

I was going to be at that event, but got shipped out from Singapore a few weeks ago. I will enjoy working in Singapore more when they open their motorsport complex next year. Drift is popular, and pretty cool that some Aussie influence is present in their drift scene!

thats fanga dan from nz. he has been drifting a rb26 power commo for a while now. kills it too. he wanted to use the v8 but had a 26 or somthing along those lines and could not get enough sponsership at the time to do the v8 thing. combo seems to work very well.

i wonder if anyone has taken the adventra running gear and put it in a commodore shell, turbo/supercharged 4wd V8 power

yep theres a guy on the commodore forum thats doin it. just for the record holden made a ltd edition monaro with the awd. its called a coupe4. the dude from HPF put a big ass turbo on a coupe4. i cant remember how it went.

All I can think is. Why would you bother? Some people honestly just have too much money.

i would be proud to have that parked in my driveway, i reckon the stance, the graphics even the rear wing look agressive yet sleek... regardless of engine type.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thank you GTSBoy and MBS206 I have done the compression test with the motor out of the vehicle, reason for the test was to see if I needed to remove the head and do rings etc while its out. I'm in the process of respraying the vehicle and tidying up a few things. Story behind it all is I've just purchased the skyline and it was running when I got it, never drove it on the street though as I wanted to pull it down and do it all up again before registering it. the gentleman I purchased it from told me the motor has a forged bottom end and has a decent tune through it but I was going to pull the sump off anyway to see if it is a forged bottom end. that's why I thought id do a compression test beforehand. 
    • Man, I'm kind of amazed that the price of the turbo has not changed in 7 years. Everything else is inflating beyond reason, but not this? Good on Tao / hypergear I guess? Anyways, good luck with the sale!
    • I'm selling my brand new, in the box, never used Hypergear ATR45 - and I had some additions I paid for a few yrs back when I purchased it. Never ended up having the rest of the money to add all the mods at once, so I just ended up slowly selling each part. I originally had it internally gated, with the dump pipe, however I found it was incompatible with what I was going to use it for, so I contacted (I think Ken) from Hypergear, and he and I messaged back and forth & he got me to ship the turbo back, where they modified it & made it externally gated, and gave me the 5 bolt dump pipe attachment for custom welding. (Photos below) This turbo like I said has never touched the inside of an engine bay, it's completely brand new, never used, been sitting in the same box it arrived in, covered in plastic & all. Below are the photos of it: And while the guys at Hypergear were making it in-shop, they sent me some photos of the process: I'm looking at selling this just because I'm in need of the money right now, and don't have plans on modifying the 34 anytime soon - and from reviews & peformance sheets, this turbo had amazing results back when I was researching. The turbo was purchased in 2018 for $1.9k, with the mods I got added on. Looking at the website now, for the same turbo they sell (ATR45SAT), with the current addons it adds up to $1830 for the turbo Current addons included: - Bolted dump adaptor - Ball bearing CHRA - Braided oil feeding line So I'm looking to possibly sell it for around $1800, with shipping included in that 1.8k, It cost me around $120 to ship - so yeah thought I'd throw it out there and see if anyone was interested in purchasing. Cheers!
    • Turn up your speakers https://youtu.be/5_GK5ChNjOs?feature=shared
×
×
  • Create New...