Jump to content
SAU Community

Recommended Posts

Yeah agreed, this would be VERY cool. A sleeper EVO 3 of sorts!

But one flaw, this guy wants to do exactly the OPPOSITE to what you've outlined here...

He's downgrading!

NAR mate this is not an evo 3 sleeper, it looks so RICED up its not even funny- but tough. Orginally it was a glxi (bog stock lancer) now wide body with 265 in all 4 corners, screamer pipes, 3.5inch exhaust and hauls ass hard! He recent put a custom ecu from usa so he can make the tune himself. He is thinking about running e85 so can run 20psi plus of boost, jet on wheels lol

Yes he is upgrading not down grading too but i mean we all had that crazy idea that we wanted to do! I would strongly advise, speak to someone at least 25 that is still into car obviously and see what they have to say. Don't ask a 17yo hektik (stero type, please no further jokes about that word, we all get the picture) as they got on idea! Most of the ppl on hear have been through wat you are going through- Remember that advise is FREE :thumbsup: easier to ask for it than go to work and blow all this cash

  • Replies 136
  • Created
  • Last Reply

Top Posters In This Topic

If you allready have an NA R32... Then bolt up or all the GTR parts you can to it and be happy with what you've got.

Leave the GTR in a shed and start building it up untill you get off your P's...

OR

Move to Tassie... No P plate- turbo laws.

OR

Leave you GTR in Tassie and drive it there (in the school holidays) ha ha ha...

why would i spend all the money on th gts to make it look like a gtr and it's not worth shit, and i dont see any gts4 non turbos... i don't give a shit about the car being plated as a turbo so what its plated as a turbo but at the end of the day its only a non turbo gts powered car that has the stopping of a gtr,

say if you had a vk plated as a v8 with a six they wont touch you...

say you had a mazda rx3 but you put a piston in it they still wont touch you...

my mate has a r33 gtst but has a rb25de in it they dont touch him cos it dosen't have the power of what the plate says...

Hahaha and what do you think your GTR is going to be worth after you retrograde it to be "supposedly" P plater legal? Honestly, you're better off just driving the GTR illegally on your P's, it's just as illegal and costs you less money to do. And that's a BAD idea. You seem to be fairly under-researched in terms of Victorian road laws...I recommend having a good hard read of the relevant legislation on the Vicroads website. Leave your emotions at the door because the whole reason you want to do this is nothing short of emotional. So here's some logic to combat said emotions: The heart of a GTR is an RB26DETT and all wheel drive. You take that away from the car and the only people who will consider it a GTR are the last people you want to consider it so, i.e. the law. You'd be no better than a GTR badged GTS.

There's no non-patronising way to say it, so forgive the tone of my sentiments but what you are planning to do really is ridiculous as almost every post in this thread has pointed out. It's not like you have divided opinion where there's a chance it could be a good idea.

so what im stubborn or i know what i want.. i spend 2k on a decent daily and have another rego to pay or i spend 2k on a car i want and have it on the road, damages arn't that bad they call it a agreed value.. and i work in a panel shop anyways im here for help to build this not to have other change what i want :D

Listen to the people here who have lived life before you...it will save you alot of hard lesson learning, for experience whilst often the best teacher is almost always the harshest teacher - she gives the test first and the lesson afterwards.

haha what a joke, you have already been told and flamed enough so I wont bother giving my advice.

on the other hand autech has already done this (as mentioned above) but they didnt molester a gtr in the first place, if you find one of these it will fit the bill legally.....good luck though, last time I saw one for sale was at R31 House last year.

Do Autech have something against turbos or an affinity for naturally aspirated? The Autech S15 was also non-turbo.

NAR mate this is not an evo 3 sleeper, it looks so RICED up its not even funny- but tough. Orginally it was a glxi (bog stock lancer) now wide body with 265 in all 4 corners, screamer pipes, 3.5inch exhaust and hauls ass hard! He recent put a custom ecu from usa so he can make the tune himself. He is thinking about running e85 so can run 20psi plus of boost, jet on wheels lol

Yes he is upgrading not down grading too but i mean we all had that crazy idea that we wanted to do! I would strongly advise, speak to someone at least 25 that is still into car obviously and see what they have to say. Don't ask a 17yo hektik (stero type, please no further jokes about that word, we all get the picture) as they got on idea! Most of the ppl on hear have been through wat you are going through- Remember that advise is FREE :P easier to ask for it than go to work and blow all this cash

wouldnt need e85 to run 20psi

i run that daily in my evo as do many others on 98

Yes they are, the other is a OS Giken twin cam head for a L-series. L-series were all SOH from factory.

Just to add - L series engines were not cross flow designs too :P

That OS giken head would be horn.

OMG I WANT TO CRY!! cant believe you would dare hurt a masterpiece. I am a R32 GTR owner and im sad because its getting fixed and i havent driven it for a week. please PLEASEEE sell the car and buy a rb25 R33. i waited till i turned 21 just to buy it. the wait is well worth it

Ok,

My suggestions are as follows since learning doesn't seem to be a part of your stunning repertoire:

1. Use 400 dollars and buy some crack, at least you will be happy when old granny's in civic gli's are frantically raping their horns to get you out of their way

2. Buy a Donkey, ram your exhaust pipe into the rear end, and watch it race your NA GTR, it would make a hell of a lot louder noise too. priceless!

3. Give me the money, I would like the entire Nagisa Auto catalogue for my GTR, pretty please?

4. Invest in zimbabwe, your money would double up within a week in their currency which would then become less than an 8 pack of toilet paper rolls in Australia

5. Strip naked in front of a mental institute and do a lil dance, they'll take you in and give you some happy shots. Similar to number 1 and it's free!!

6. Similar to number 5, strip naked with a group of people boosted by the power of viagra of which are all too eager to bat for the other team. They'll do you like the granny's in their civic gli's

7. I can't think of anything else but I think you are a natural comedian, I'll give you my recyclable bottles to watch you perform your NA conversion, and do all of the above.

8. Cut your balls off! Then if you ever get lucky with someone of equal intellectual capacity, stitch them back on and be a super cool limp dck. She would be so impressed that she might even kick it to see what happens.

So, are you sure you really want to go down this path?

Edited by s2d4

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
×
×
  • Create New...