Jump to content
SAU Community

Recommended Posts

Hey guys - I've borrowes my mates Stagea while he's overseas but can't for the life of me find where the fuel cap is?

Anybody have any idea?

Haha this is somewhat embaressing..

Had me stumped for half an hour the first day, sitting in the servo. :D

Just a gentle push on the flap, door side will pop it open. Car must be unlocked!!

Hey guys - I've borrowes my mates Stagea while he's overseas but can't for the life of me find where the fuel cap is?

Anybody have any idea?

Haha this is somewhat embaressing..

hahaha

i did the same thing first time i went to fill up..

i tried to call everyone i knew with a m35 and no body would pick up... then called everyone else...

i than drove home without fuel..

When I picked my car up for the first time it didn't have a great deal of fuel in it. That didn't worry me but like others when I got to the servo I get out and as you do I lock the doors don't I lol

So I'm pushing on the fuel door no go, so then I open the car and going looking for a pull lever or switch.... no go... I then get the manual out of the glovebox (just a small english job from the compliance mob, extremely unhelpful in most instances)... no go...

I'm getting a little frustrated by this point and try to push on the fuel door with the car open, hey presto.. what a relieve :D

Oh, and the doors need to be unlocked to lock the fuel door or it won't close.

I then get the manual out of the glovebox (just a small english job from the compliance mob, extremely unhelpful in most instances)... no go...

Yeah the compliance manual has nothing of any use, but I found the diagrams for the fuel cap in the orig jap manuals that came with my car, took about 5 minutes of fretting and flicking through pages (all the while sitting at servo) to find it though :D

Had me stumped for half an hour the first day, sitting in the servo. :)

Just a gentle push on the flap, door side will pop it open. Car must be unlocked!!

What he said ^

Push on the edge nearest the front of the car.

hahaha

i did the same thing first time i went to fill up..

i tried to call everyone i knew with a m35 and no body would pick up... then called everyone else...

i than drove home without fuel..

When I picked my car up for the first time it didn't have a great deal of fuel in it. That didn't worry me but like others when I got to the servo I get out and as you do I lock the doors don't I lol

So I'm pushing on the fuel door no go, so then I open the car and going looking for a pull lever or switch.... no go... I then get the manual out of the glovebox (just a small english job from the compliance mob, extremely unhelpful in most instances)... no go...

I'm getting a little frustrated by this point and try to push on the fuel door with the car open, hey presto.. what a relieve :/

Oh, and the doors need to be unlocked to lock the fuel door or it won't close.

LMFAO

Same thing with me, picked the car up which had no fuel in it.

Went to the closest servo and was searching for the fuel lid release for a couple of minutes... decided it was a "push open" fuel lip so went over to it and pushed on it... didn't open and the car was not locked (I pushed on the wrong side lol).

Guy at the bowser next me and my chaeffeur mate decided to look all over the car for the release button.

Ended up call Ben from Northshore who told me to push on the cap... walked over to the car and pushed on the correct side of the filler cap. :D

I have never felt that a filler cap could open in such a mocking manner.

lol not being able to find the fuel release is a major issue with a stagea!

Indeed! You'll be spending plenty of time at servo's unless you're either only borrowing for a very short time, or hardly using it! It's probably the main downside to owning one.

Indeed! You'll be spending plenty of time at servo's unless you're either only borrowing for a very short time, or hardly using it! It's probably the main downside to owning one.

Disagree there Nick, gotta say that I love the way it is set up... I especially notice how much I like it when I take my wife's car to the servo and have to reach down to pull that stupid fuel release lever.

I mean, it is a one way hinge! What could possibly go wrong with it?!*

*special not to the "Karma" and "Murphy" and his law, I did not pose this question to be shown what can go wrong with it

Edited by iamhe77
  • 4 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
×
×
  • Create New...