Jump to content
SAU Community

Recommended Posts

Hey guys - I've borrowes my mates Stagea while he's overseas but can't for the life of me find where the fuel cap is?

Anybody have any idea?

Haha this is somewhat embaressing..

Had me stumped for half an hour the first day, sitting in the servo. :D

Just a gentle push on the flap, door side will pop it open. Car must be unlocked!!

Hey guys - I've borrowes my mates Stagea while he's overseas but can't for the life of me find where the fuel cap is?

Anybody have any idea?

Haha this is somewhat embaressing..

hahaha

i did the same thing first time i went to fill up..

i tried to call everyone i knew with a m35 and no body would pick up... then called everyone else...

i than drove home without fuel..

When I picked my car up for the first time it didn't have a great deal of fuel in it. That didn't worry me but like others when I got to the servo I get out and as you do I lock the doors don't I lol

So I'm pushing on the fuel door no go, so then I open the car and going looking for a pull lever or switch.... no go... I then get the manual out of the glovebox (just a small english job from the compliance mob, extremely unhelpful in most instances)... no go...

I'm getting a little frustrated by this point and try to push on the fuel door with the car open, hey presto.. what a relieve :D

Oh, and the doors need to be unlocked to lock the fuel door or it won't close.

I then get the manual out of the glovebox (just a small english job from the compliance mob, extremely unhelpful in most instances)... no go...

Yeah the compliance manual has nothing of any use, but I found the diagrams for the fuel cap in the orig jap manuals that came with my car, took about 5 minutes of fretting and flicking through pages (all the while sitting at servo) to find it though :D

Had me stumped for half an hour the first day, sitting in the servo. :)

Just a gentle push on the flap, door side will pop it open. Car must be unlocked!!

What he said ^

Push on the edge nearest the front of the car.

hahaha

i did the same thing first time i went to fill up..

i tried to call everyone i knew with a m35 and no body would pick up... then called everyone else...

i than drove home without fuel..

When I picked my car up for the first time it didn't have a great deal of fuel in it. That didn't worry me but like others when I got to the servo I get out and as you do I lock the doors don't I lol

So I'm pushing on the fuel door no go, so then I open the car and going looking for a pull lever or switch.... no go... I then get the manual out of the glovebox (just a small english job from the compliance mob, extremely unhelpful in most instances)... no go...

I'm getting a little frustrated by this point and try to push on the fuel door with the car open, hey presto.. what a relieve :/

Oh, and the doors need to be unlocked to lock the fuel door or it won't close.

LMFAO

Same thing with me, picked the car up which had no fuel in it.

Went to the closest servo and was searching for the fuel lid release for a couple of minutes... decided it was a "push open" fuel lip so went over to it and pushed on it... didn't open and the car was not locked (I pushed on the wrong side lol).

Guy at the bowser next me and my chaeffeur mate decided to look all over the car for the release button.

Ended up call Ben from Northshore who told me to push on the cap... walked over to the car and pushed on the correct side of the filler cap. :D

I have never felt that a filler cap could open in such a mocking manner.

lol not being able to find the fuel release is a major issue with a stagea!

Indeed! You'll be spending plenty of time at servo's unless you're either only borrowing for a very short time, or hardly using it! It's probably the main downside to owning one.

Indeed! You'll be spending plenty of time at servo's unless you're either only borrowing for a very short time, or hardly using it! It's probably the main downside to owning one.

Disagree there Nick, gotta say that I love the way it is set up... I especially notice how much I like it when I take my wife's car to the servo and have to reach down to pull that stupid fuel release lever.

I mean, it is a one way hinge! What could possibly go wrong with it?!*

*special not to the "Karma" and "Murphy" and his law, I did not pose this question to be shown what can go wrong with it

Edited by iamhe77
  • 4 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...