Jump to content
SAU Community

Recommended Posts

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

Sorry, everyone talks about it I'm not sure wat it is?

Combustion gasses leaking past the piston rings. All combustion engines have blowby....it's 'excessive blowby' that means your engine MAY not be healthy. There are various other reasons for blowby including detonation (or hitting the limiter) and not really excessive blowby but gives the same result - incorrect plumbing of catch cans causing pressure build up in the crank case

Link to comment
https://www.sau.com.au/forums/topic/329323-what-is-blow-by/#findComment-5352027
Share on other sites

Combustion gasses leaking past the piston rings. All combustion engines have blowby....it's 'excessive blowby' that means your engine MAY not be healthy. There are various other reasons for blowby including detonation (or hitting the limiter) and not really excessive blowby but gives the same result - incorrect plumbing of catch cans causing pressure build up in the crank case

What are signs of blow by then?

Link to comment
https://www.sau.com.au/forums/topic/329323-what-is-blow-by/#findComment-5352036
Share on other sites

What are signs of blow by then?

All engines has blow by. You means signs of excessive blow by or indication of engine failure?

If that is the case: Lots of oil throwing out of breathers, Poor engine compression, Engine noise, oil soaked spark plugs and etc.

Link to comment
https://www.sau.com.au/forums/topic/329323-what-is-blow-by/#findComment-5352184
Share on other sites

Heavy breathing......if you take your oil filler cap off and the motor is choofing hard [thee will be some blowby but you should be able to tell the diff]. If you dipstick keeps popping out, if you are using heaps of oil, if you are leaking oil out of the sump and/or rockers, if you have a burnt oil smell, if you have oil in your rocker tubing that drips out......there's probably a few I've missed.

Link to comment
https://www.sau.com.au/forums/topic/329323-what-is-blow-by/#findComment-5352187
Share on other sites

Heavy breathing......if you take your oil filler cap off and the motor is choofing hard

This can be misleading, its hard for a novice to know the difference so I would not advise this often.

Comp test and leak down are the most effective ways of testing for signs of wear that would result in excessive blow-by. Realistically if you are burning lots of oil, you can fit a catch can to try and rule out the turbo, then you can start thinking about blow-by.

Link to comment
https://www.sau.com.au/forums/topic/329323-what-is-blow-by/#findComment-5352281
Share on other sites

i remember seeing this r32 gtr begining of this year, at a first glance car looked neat, had it idling until it was warm and i took the oil filler cap off, it wasblowing white air/mist as high as the bonnet ! was making a "choofing" sound aswell...never seeing blow by that bad before..

Link to comment
https://www.sau.com.au/forums/topic/329323-what-is-blow-by/#findComment-5352767
Share on other sites

i remember seeing this r32 gtr begining of this year, at a first glance car looked neat, had it idling until it was warm and i took the oil filler cap off, it wasblowing white air/mist as high as the bonnet ! was making a "choofing" sound aswell...never seeing blow by that bad before..

I checked out an S15, full service history for 120thou k. Everything looked great, took the oil cap off and dear son of rajab. The car couldn't idle, on the verge of stalling, and it was blowing oil drops out that high it covered the underside of the bonnet, and even made its way onto both front gaurds :down:

However, I've noticed many SR's have loads more blow by then any RB I've encountered.

Link to comment
https://www.sau.com.au/forums/topic/329323-what-is-blow-by/#findComment-5353363
Share on other sites

Many of you have absolutely no idea what 'excessive' is.

If you take the oil cap off any of the nissan turbo engines, the engine should drop in idle or nearly stall. They are a sealed engine. The cylinder head is SPLASH lubricated so it is meant to throw oil around there.

Fumes coming from the rocker cover breathers or out of the oil cap means nothing. The engine has to breathe. If it doesn't, bad shit happens.

The most annoying thing to hear is ppl going on about so called 'blowby' because when the car is on the dyno, fumes were coming out of their catch can breather or from their cover breather.

Link to comment
https://www.sau.com.au/forums/topic/329323-what-is-blow-by/#findComment-5353471
Share on other sites

I hear you. So explain to us your opinion of "excessive" is ?

Many of you have absolutely no idea what 'excessive' is.

If you take the oil cap off any of the nissan turbo engines, the engine should drop in idle or nearly stall. They are a sealed engine. The cylinder head is SPLASH lubricated so it is meant to throw oil around there.

Fumes coming from the rocker cover breathers or out of the oil cap means nothing. The engine has to breathe. If it doesn't, bad shit happens.

The most annoying thing to hear is ppl going on about so called 'blowby' because when the car is on the dyno, fumes were coming out of their catch can breather or from their cover breather.

Link to comment
https://www.sau.com.au/forums/topic/329323-what-is-blow-by/#findComment-5353528
Share on other sites

I hear you. So explain to us your opinion of "excessive" is ?

Impossible to explain it. It's something you know from seeing hundreds of cars over years of experience. Most ppl only see one or two and don't really have anything to compare it to. I'd be happy to take video of a 'normal' one so everyone can see what that looks like.

But, it's not like I can give some sort of measurement of gas flow or a quantity of fume lol.

You'd know from your experience with tuning anyway....why are you asking me?....or is it more for the readers?

Link to comment
https://www.sau.com.au/forums/topic/329323-what-is-blow-by/#findComment-5354082
Share on other sites

errr... Think its best i walk away from this one. Should have known better then to bother with someone with an attitude like that.

Wasn't having a go at you mate. Just saying there is no practical way to type in text how much is too much. I was also pointing out that I assumed you would know how much is too much as you have a lot of experience especially with cars on dynos.

Link to comment
https://www.sau.com.au/forums/topic/329323-what-is-blow-by/#findComment-5354739
Share on other sites

my rb30e+t (high comp) is a massive fan of blow by lol. pops the dip stick out all the time, oil in the intake, fouls plugs, oil even seeps out of the sump and around the oil pump now aswell.

putting a new rb30et in this weekend and pulling the old block down to build a 25/30 if it is still any gd :P

Link to comment
https://www.sau.com.au/forums/topic/329323-what-is-blow-by/#findComment-5354763
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
    • The annoying part about neglect, is when you start to replace one thing, and find ten more broken things. Ham fisted monkey repairs you normally only find out about when trying to do something unrelated! Ha ha   Neglect you can kind of anticipate the huge costs to fix it all. Ham fistedness is normally a shock the first time your work on a new old car, as everything "looked" good before.
    • For DBA, check out their guide table here. https://dba.com.au/wp-content/uploads/2023/01/Direct_Replacement-Guide-2021.2.pdf   Additionally they have some other guides and info on how to make sure you choose the right pad.
×
×
  • Create New...