Jump to content
SAU Community

Recommended Posts

OS Giken 3.0 litre kit for around the $20K mark. But there are bigger kits than this..........Spool was looking at a 3.2 and a 3.4 kit.
$20K!!!!

or Rb30 for $200 (or realistically $5 to $10k fully forged and balanced etc)

Charlie still has his apexi 2.9 kit for sale.

http://www.skylinesaustralia.com/forums/Ra...B2-t285391.html

There is also some company out there that is de-stroking rb30 cranks to 83mm, running standard rb26 rods and custom pistons to make an RB29.

User 'Mark99' on this forum was the machinist that developed the stroker kit from memory. I cant remember what the company was called though.

Charlie still has his apexi 2.9 kit for sale.

http://www.skylinesaustralia.com/forums/Ra...B2-t285391.html

There is also some company out there that is de-stroking rb30 cranks to 83mm, running standard rb26 rods and custom pistons to make an RB29.

User 'Mark99' on this forum was the machinist that developed the stroker kit from memory. I cant remember what the company was called though.

I think he worked for Rhemac in Adelaide.

the 3.2 and 3.4l kits by spool are for rb30 blocks not rb26

Yep, not sure if they will adapt to 4wd, but I'm pretty sure it has been done for the rb30. But I've got a funny idea that the 3.2/3.4 crank throw will not allow the 4wd front housing.............did I read it or am I dreamin' - can somebody correct me???

RB30DET FTW!

That RB31DETT will just be a slightly overbored RB30.

Nitto do the 3.2L kits for RB30 (soon?)

Spool do the 3.4L kits for RB30 (soon)

And I think RIPSNZ do a 3.2L aswell?

OR save your money and just built an RB30DET.. you'd only need the extra 200-400cc if running a HUGE turbo.

P.S. I love my 30 :(

Edited by bubba

love the comments on the rb31 block

i read his thread the other day

he has made it an rb26 open deck with new sleeves, rods and pistons and an rb30 crank

give a better bore-stroke ratio or something and is designed for driveability, torque and response

he has put a lot of work into it but its still in testing and will eventually be on sale once everything is tested thoroughly

on topic, if you want more displacement then you can't look past an rb30 with the 4wd adapter

r.i.p.s in nz will make you a forged bottom end with the adapter and ship it to oz, bolt it in, add your head and away you go

There are a few places now that do a RB30 adapter to run awd. Id say get a dirty 30 bottom end and a Nitto 3.2 crank. They say its good for 1200hp and 10,000rpm.

i like the sound of that.... on the other hand the sound of the price mite not be so good. haha

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...