Jump to content
SAU Community

Recommended Posts

I hate campers so much... I've been known to respawn after getting killed by a camper and run the entire length of the map avoiding gunfights along the way to f**k their camping shit up... nothing better than walking up behind a sniper and sticking semtex to the back of their head

my kill death ratio is barely over 1.00 as I get bored to quick and like to run and gun (jumping off stuff and killing people on the way down is a favourite)... I usually score in top 3 though

that's one advantage consoles have over PC... much harder to cheat

And who could auto-prestige to 15? - Console

My kdr is around 1.95 overall which is pretty sad but was always going to happen being able to prestige and always switching weapons / perks / being stupid and trying to complete pro perks when they are just going to reset again. CoD4 I was more around 1.8+ for my all gold profile and 2.5+ for my 50 in under 24h profile.

i cant beleive how many retards have mics, they either start shit talking as soon as they see you have a mic or start as soon as you start killing them

then add to that , how many 12 year olds who have mics who sound like their balls are up in their stomach....

f*king hell

i cant beleive how many retards have mics, they either start shit talking as soon as they see you have a mic or start as soon as you start killing them

then add to that , how many 12 year olds who have mics who sound like their balls are up in their stomach....

f*king hell

Thats why I love my headset with the seperate volume control for chat :thumbsup:

i cant beleive how many retards have mics, they either start shit talking as soon as they see you have a mic or start as soon as you start killing them

then add to that , how many 12 year olds who have mics who sound like their balls are up in their stomach....

f*king hell

and why do they all say "bro"

its really effing annoying

uuuum ever since the new patch I can't login to Black Ops multiplayer... I can sign into Playstation Newtwork but then when I click on multiplayer it does the usual 'downloading game content' or whatever then times out and comes up with a warning that says the Black Ops servers are down... weird because when I go to their website its all operational according to them

anyone else having problems?

if anyone wants to jam on xbox B ops add me - True TJ its shit playing alone all i do is seem to rage after 2 or so games so much camping and shit hit detection lol

I don't see how anyone can play an FPS online where someone in the game is the host. It's a rediculous advantage.

I don't see how anyone can play an FPS online where someone in the game is the host. It's a rediculous advantage.

It is a very ridiculous advantage. But also works very well in your favour when you're the host :)

i dissagree when i host which is a good 90 % of the time i get ripped off , shot around corners people lagging i cant kill, it takes me a average of 19 bullets to kill 1 person out of any gun, m16 g11 ak74u all take me the same with at least at 15 hit markers so im not missing, its shit, with harden i cant even get the aug to shoot through a door when im hosting, but some bitch with a m1911 can kill me 2 shots through the same door its bull shit, if im not host i tear up its a good 6 shots to kill anyone but if i host i might was well shut my eyes and run in circles shooting ill do more damage its f**ked they need to fix the servers and hit detection

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
×
×
  • Create New...