Jump to content
SAU Community

Recommended Posts

My old car at AutoSalon:

46578_1561963057142_1477316364_1894027_3551147_n.jpg

Apparently pulled 310awkw on their dyno.

Nice shoes he has put on it but an ugly wing!

45818_1561964457177_1477316364_1894050_2650760_n.jpg

Unless the owner tracks the car... The GT Wing is useless.

  • Replies 191
  • Created
  • Last Reply

Top Posters In This Topic

I don't mind FTOs. I nearly bought one until I realised how bloody slow they were! The handling is quite good though, and I normally hate FWDs with a passion.

If I was going to drive a girly looking lightweight car I'd take my MR2 turbo :) RWD > FWD

^^ +1

I'm quite sure our 10KG rear wing is useless too, probably never heard of lightweight carbon fibre back in the 90's :)

I guess that's why my GTR does not have a spoiler :P

Even on track does this kinda wing really help? thought they were just made just for looks...

If the wing is angled at the correct spot, it will improves aerodynamic performance at high speed.

To increase drag or generate down force, helps stabilise the rear of the car = More control = Faster you go.

The angle of attack of the wing on some cars can be adjusted to increase downward force over the rear wheels, but it has the dual result of increasing drag.

Too much drag = Slow you down.

Your R33 GTR and Nathan's R34 GTR wing / blade / spoiler can be adjusted to a certain angle.

Nismo released a Boot Lip Spoiler for the R32 GTR to increase more down force as the stock spoiler for the R32 GTR was in a fixed position.

To actually test to see if the adjustment of the wing / blade / spoiler has made any improvement, you need to test it through a Wind Tunnel.

Or at the engineering department of the car manufacture themselves.

Or take it out to a race track and hammer it hard down the straight and through a corner to see if you notice any improvement in handling.

:P

Unfortunately, majority of the shit cars running with GT Wings for street use are mostly used for cosmetics = Fucking ricers!

Until you goto a track day and see the GT Wings, it is all for a purpose.

^^ +1

I guess that's why my GTR does not have a spoiler :)

If the wing is angled at the correct spot, it will improves aerodynamic performance at high speed.

To increase drag or generate down force, helps stabilise the rear of the car = More control = Faster you go.

The angle of attack of the wing on some cars can be adjusted to increase downward force over the rear wheels, but it has the dual result of increasing drag.

Too much drag = Slow you down.

Your R33 GTR and Nathan's R34 GTR wing / blade / spoiler can be adjusted to a certain angle.

Nismo released a Boot Lip Spoiler for the R32 GTR to increase more down force as the stock spoiler for the R32 GTR was in a fixed position.

To actually test to see if the adjustment of the wing / blade / spoiler has made any improvement, you need to test it through a Wind Tunnel.

Or at the engineering department of the car manufacture themselves.

Or take it out to a race track and hammer it hard down the straight and through a corner to see if you notice any improvement in handling.

:P

Unfortunately, majority of the shit cars running with GT Wings for street use are mostly used for cosmetics = f**king ricers!

Until you goto a track day and see the GT Wings, it is all for a purpose.

Hence the upgrade to a GT Wing is justifiable, at 3KG.

Downforce + weight reduction.

Topic over :P

Fair enough...though they were more cosmetic than actual use...ill actually play with my wing and see if i can feel any difference...thanks mate...

If I fit one to my backside, will I walk faster?

Something to think about.......

Well you might also be able to fly with proper angled wings... :(

Woo came 13th out of 44 on the dyno.

Congrats bro...great stuff...

The Announcer guy at the dyno said that black gtr was a "circuit tuned track car" and not at its fullest potential for power. He said his highest recorded was 350 but on the day from memory it got something like 295 299 310kw between the 3 runs.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • After using a protractor for an actually accurate assessment of what is required,  and by NOT using my uncalibrated eyeball I worked out I need a 25° silicone bend from the TB ro the MAF, but, my choice was either a 30° or a 23° (23° is a weird spec), so I grabbed the 23° one from Raceworks I also grabbed 1mtr of 3" straight from Just Jap, I needed 350mm, but they only had 300mm, or 1mtr lengths....meh Also ordered a 1/2" hose bulkhead fitting from fleabay, this has a smoothish mushroom looking head (they are designed for below the water line of boats) that will fit inside the bend, the hose bit and threaded bit looks to long, but nothing that a hacksaw cannot fix if required, the hose will then just get jamed on the threaded bit up to the retaining nut Fingers crossed and the unsightly amount of hose clamps will be reduced down to 4 once all the parts arrive 
    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
    • No. I think it might be the AFM. Hence the use of the terms "swaptronics", which implies the use of swapping out electronics for the purpose of diagnosis. It's about the only way to prove that a small/niggling/whatever problem with an AFM or a CAS or similar is actually caused by that AFM/CAS/whatever. A known good item swapped in that still gives the same problem is likely to be caused somewhere else. They're all the same. Spraying AFMs with cleaner is an each way bet between cleaning it and f**king it.
    • Oh wow! This might actually work amazingly. Do you know the ratio of the diff? I was told the only thing you need to make sure of is if the front & rear diff ratios are the same. Ours is a 4.083 Thanks!
×
×
  • Create New...