Jump to content
SAU Community

Recommended Posts

There is something not quite right about the look. its the width or something, can't quite put my hand on it. But I think it looks great.

Question is, spend 15k on that and have a stock motor? Or keep the normal nose and drop 15k into the engine? I think i know what i'd rather... :D

I think it looks good. The rear arches need to have the same styling though(somehow) and needs bigger/ lower side skirts and a rear bar. Other then that, looks great and would be super different, so i would still have it in a flash.

I've tried pricing it all up, Nissan over here wouldn't give out prices for GTR parts.

But I imagine it's not cheap, an M35 bumper is $4,300 + gst here.

Check out Japn yahoo for second hand. Parts are cheaper than R34 gtr's. Easy to get front end bits due to people upgrading to carbon bonnets and fancy front bars.

Front bar approx $200

Bonnet $300-400

Have seen head lights on SAU for $1200-1500 each

My R34 front cost me $4500 in s/hand parts alone.

Reckon you could get it all done for 15k?

I dunno aye... I reckon the headlights will cost around 5K each :)

Considering our headlights are around 2.5K each haha

Thats what the guy says so in the other forum.

"You can pick up an M35 Stagea for around 5k upwards. If you could source second hand parts, which are rare, I reckon that would be around 2-3k So with the car, parts and labour, I reckon you'd be into 10k+"

Of course your talking GBP, not AUD. I guess it comes down to how handy you are with a spanner + Welder eh? 2nd hand parts would be the only way to go. Lets not forget, the guy owns a R35 anyway, so he mustn't be short of coin!

Thats what the guy says so in the other forum.

"You can pick up an M35 Stagea for around 5k upwards. If you could source second hand parts, which are rare, I reckon that would be around 2-3k So with the car, parts and labour, I reckon you'd be into 10k+"

Of course your talking GBP, not AUD. I guess it comes down to how handy you are with a spanner + Welder eh? 2nd hand parts would be the only way to go. Lets not forget, the guy owns a R35 anyway, so he mustn't be short of coin!

just been on the phone to this guy just thinking of get the back done as i have the impul front to get the back with the R35 tall pipe,s around 700 UK pounds , so thats my next step

just been on the phone to this guy just thinking of get the back done as i have the impul front to get the back with the R35 tall pipe,s around 700 UK pounds , so thats my next step

hmm.... interesting! Would be interested to see the exhaust he has in there (and how loud it is) and how he got around the ATTESSA pump

wow, way to make your stagea look like a bag of dicks.

front's wider than the rear. the fender and the A pillar doesn't line up properly. the front bumper doesn't line up with the bonnet. man if you're gonna do something unique, do it right.

like wilson tuckey says... do it once, do it right and do it with fibre.

wow, way to make your stagea look like a bag of dicks.

front's wider than the rear. the fender and the A pillar doesn't line up properly. the front bumper doesn't line up with the bonnet. man if you're gonna do something unique, do it right.

like wilson tuckey says... do it once, do it right and do it with fibre.

Farken lol. Always good to get a colourful response from you shan. I bet Neil is missing his stag.

Totally agree, doesnt line up at all and needs to to be wider. Some others I have seen look better.

Edited by dirtyRS4

Me too, not sure about the styling issues. Also I'd question why you'd bother, especially in Britain where cars are cheap. For that money you'd get a 2001 Maserati. For just under 20K (pounds) you can just get into a V12 Aston Martin Vantage.... or for less than the 10K take your pick of M3's, Audi Rs's etc.

There's a limit to being different I reckon. I play with my cars but if those sort of cars were that cheap here, I'd be getting one of them rather than a bodged up half breed.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
×
×
  • Create New...