Jump to content
SAU Community

Recommended Posts

Thanks, but I'm well aware that you've previously posted those results, not really any need for name calling, most of us are adults here

You are the one that name called, and I wasn't saying that was the differences so much as saying you could safely expect at least that much...

You are the one that name called, and I wasn't saying that was the differences so much as saying you could safely expect at least that much...

My post generally stated disbelief at the disparity between roller and hub dynos. 70KW is substantial figure in anyone's language, hence "Nigga please"

My comments weren't aimed at anyone in particular, just a general statement but when simonR32 decided to call me a dickhead, as if I had not read the thread and seen the results posted about, which I clearly had considering they were literally 2 posts above mine, what do you expect me to say ?

I wasn't commenting on what you said at all Lithium but rather generally about SimonR32's post.

as for the dig about dyno figures in perth, the fact that I seem to have touched a nerve speaks volumes, do a forum search and see what comes up, obviously I'm not the only one to make this sort of comment. (Queue 900 people from perth having a sook/teary about this and that dyno being the worlds most accurate"

In the end it comes down to the fact that when I see something I think is a bit odd, I'm going to call it straight up.

This isn't netball, like I said we are all big boys and manners cost nothing, so what's the problem.

I didn't call you a dickhead. I commented that you made yourself look like a dickhead which I think is unusual for you (after reading posts you have made in the past). If I wanted to call you a dickhead I would have, I didn't and I chose my words wisely, so please read it in context.

It must be the air in wa that makes the dynos read high because they are the same dynos with the same calibration and corrections :-)

It's ok though, my shitty 480rwhp seems to keep a few 700rwhp Eastern states GTR's honest :-p

I didn't call you a dickhead. I commented that you made yourself look like a dickhead which I think is unusual for you (after reading posts you have made in the past). If I wanted to call you a dickhead I would have, I didn't and I chose my words wisely, so please read it in context.

It must be the air in wa that makes the dynos read high because they are the same dynos with the same calibration and corrections :-)

It's ok though, my shitty 480rwhp seems to keep a few 700rwhp Eastern states GTR's honest :-p

70kw is a bit much for me I think but between two dynos even with the same corrections anything is possible.

I probably bit a little bit hard over nothing so I'm just willing to chalk this up to miss-communication

and no chance mate, we build our tracks downhill over here :rofl:

I don't really have anything else to add so here is a sweet Miami Vice picture.

miami-vice.jpg

It nearly runs a 10 and two different machines measure its output no doubt on different algorithms and different variables.

Enough sooking, is don is good.

On a plus note.....

My 8374 TS IWG should be shipped this month, So early next month it should be in my hot little hands!! WOOHOO can't wait!!:worship::cheers:

I am getting a Manifold made here for it, So there will be a little wait for that.....I would have loved a Full-Race one, They are a work of art....But it starts to add up getting one from the other side of the world.

  • 2 weeks later...
  • 3 weeks later...

dont know if anyone can confirm this.

But i have been told by a large Aus supplier that BW may be dropping the whole EFR range due to 'internal problems" in that side of the business.

apparently they have spent so much money on R&D , marketing etc and has cost BW lots of money. and the big bosses at BW may scap the whole thing.

i know i ordered a turbo in march this year went back to supplier yesterday and they still cant tell me when one is arriving,

Given the amount of secrecy that seems to follow them I'm surprised such information would have leaked. I mean people won't even say a single turbo shat itself. SIF a full production shut down would get out.

I heard that they were having trouble with there suppliers manufacturing quality control and have had to find a new supplier. If this is correct, that would take a fair while.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Take the value it measured as, and pick the closest range available that is above the reading on the screen.   Also, no point just testing the coils. Read what has been said again. You need to test all your wiring, everything.
    • Does the scanner do all the CUs in the car, or only the ECU?
    • @666DAN sorry to bring you and old thread.     I've got my de+t done and it's all running great other than 1 small issue.    Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd when selected . But nothing when in  drive or what gear your in when you pop it into tiptronic. I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Do ya have any ideas?     Cheers man
    • Well I recently changed my rear axles and was thinking if I bumped anything, I have been driving the car for a while now though... But it has been raining today so everything is wet under the wheel arches. Brakes feel fine and can't hear any of the metal screamers, I had a squeak coming from one of the handbrake drums but that seems to have gone away a while ago. I was going down a hill when it lit up and I did feel the abs bite for a second and question why it did it?
    • Correct. Um. I dunno. I haven't cared enough about the way that the NA cars work to know for sure. But..... The 33/34 turbo manual cars have an electronic speed sensor in the gearbox that outputs a +/- (ie, sawtooth AC) voltage signal. That is connected to the speedo. The speedo then outputs a 0-5v square wave (ie, PWM) signal that the ECU (and any other CU on the bus) sees. The speed sensor is NOT directly connected to the ECU. So here's the problem. Your new ECU expects to see the PWM signal, but must somehow be getting a direct signal from the diff speed sensor. Which would suggest that the wiring of the NA car is not the same as the turbo cars. I think you will need to spend some time with (hopefully the wiring diagram for the car) and a multimeter to see what is connected to what. Then, presuming I am correct**, you would then want to separate the ECU speed signal input from the rest of the car's wiring, and probably either buy a speed signal converter, or build one using an arduino (or similar). That would take in the speed sensor signal and output a scaled (and suitably rearranged) signal for the ECU. ** We shouldn't presume that I am correct here, because there might be something else crazy going on. I don't think you could convert the speedo to be fed from the gearbox sensor, because the pulse rate from that sensor is probably different to the diff sensor and then the speedo would read wrongly. And this also wouldn't fix the ECU's problem either, because the ECU doesn't want to see the gearbox signal direct either (assuming that they are all on the same wiring, for some odd NA related reason, see above caveat!) Does this help? Probably not. Can you make it work? Almost certainly. With the above work. You should buy a handheld oscilloscope from Aliexpress so that you can view these signals directly. Connect up the probes and drive the car. Show photos of the screen when drving at known speeds and connected to different places, and we'll see what we can learn about it.
×
×
  • Create New...